1,497 research outputs found

    ANALYSING THE CAPACITY OF A TRANSPORTATION NETWORK. A GENERAL THEORETICAL APPROACH

    Get PDF
    Estimation of transportation network capacity is important in analysing network performance. In the existing literature, the capacity of a network is defined in conditional terms as a theoretical construct called “reserve capacity”. This may be limited because, when considering local land-use development, the hypothetical uniform increase in O-D flows is not always realistic. This paper, introducing the concept of “capacity function”, proposes a generalized concept of road network capacity which does not require information on either current O-D demand or the corresponding growth trend. Attention focuses on deterministic and stationary situations in which only one path is available for each O-D pair. Some examples regarding simple study cases demonstrate the capacity of this approach to solve problems and, consequently, to contribute to the analysis of network performance

    Gamma-GQM Time Headway Model: Endogenous Effects in Rural Two-lane Two-way Roads

    Get PDF
    AbstractStudy of vehicle time headway distributions is essential in many traffic engineering applications, such as capacity and level of service analysis and, in recent years, in the fields of vehicle generation in traffic micro-simulation models and driving simulation applications. This paper presents results from an experimental analysis of vehicle time headway distributions on two-lane two-way rural roads. Analysis focused on estimating a well-known model, the gamma-generalized queuing model (gamma-GQM). A trendless analysis of observed time headways was also carried out. The endogenous traffic parameters considered as affecting time headway distributions were flow rate and flow composition (percentage of heavy vehicles). Exogenous conditions, such as weather and geometric futures, were common to all time periods and cross-sections analysed. Gamma-GQM pdf appears to be very suitable for representing real headway distributions in all the analysed situations; it fits real-time headway distributions well, despite flow rate range and traffic composition (range of percentage of heavy vehicles)

    Measurements of vacuum magnetic birefringence using permanent dipole magnets: the PVLAS experiment

    Get PDF
    The PVLAS collaboration is presently assembling a new apparatus (at the INFN section of Ferrara, Italy) to detect vacuum magnetic birefringence (VMB). VMB is related to the structure of the QED vacuum and is predicted by the Euler-Heisenberg-Weisskopf effective Lagrangian. It can be detected by measuring the ellipticity acquired by a linearly polarised light beam propagating through a strong magnetic field. Using the very same optical technique it is also possible to search for hypothetical low-mass particles interacting with two photons, such as axion-like (ALP) or millicharged particles (MCP). Here we report results of a scaled-down test setup and describe the new PVLAS apparatus. This latter one is in construction and is based on a high-sensitivity ellipsometer with a high-finesse Fabry-Perot cavity (>4×105>4\times 10^5) and two 0.8 m long 2.5 T rotating permanent dipole magnets. Measurements with the test setup have improved by a factor 2 the previous upper bound on the parameter AeA_e, which determines the strength of the nonlinear terms in the QED Lagrangian: Ae(PVLAS)<3.3×1021A_e^{\rm (PVLAS)} < 3.3 \times 10^{-21} T2^{-2} 95% c.l. Furthermore, new laboratory limits have been put on the inverse coupling constant of ALPs to two photons and confirmation of previous limits on the fractional charge of millicharged particles is given

    The PVLAS experiment: measuring vacuum magnetic birefringence and dichroism with a birefringent Fabry-Perot cavity

    Get PDF
    Vacuum magnetic birefringence was predicted long time ago and is still lacking a direct experimental confirmation. Several experimental efforts are striving to reach this goal, and the sequence of results promises a success in the next few years. This measurement generally is accompanied by the search for hypothetical light particles that couple to two photons. The PVLAS experiment employs a sensitive polarimeter based on a high finesse Fabry-Perot cavity. In this paper we report on the latest experimental results of this experiment. The data are analysed taking into account the intrinsic birefringence of the dielectric mirrors of the cavity. Besides the limit on the vacuum magnetic birefringence, the measurements also allow the model-independent exclusion of new regions in the parameter space of axion-like and milli-charged particles. In particular, these last limits hold also for all types of neutrinos, resulting in a laboratory limit on their charge

    First results from the new PVLAS apparatus: a new limit on vacuum magnetic birefringence

    Full text link
    Several groups are carrying out experiments to observe and measure vacuum magnetic birefringence, predicted by Quantum Electrodynamics (QED). We have started running the new PVLAS apparatus installed in Ferrara, Italy, and have measured a noise floor value for the unitary field magnetic birefringence of vacuum Δnu(vac)=(4±20)×1023\Delta n_u^{\rm (vac)}= (4\pm 20) \times 10^{-23} T2^{-2} (the error represents a 1σ\sigma deviation). This measurement is compatible with zero and hence represents a new limit on vacuum magnetic birefringence deriving from non linear electrodynamics. This result reduces to a factor 50 the gap to be overcome to measure for the first time the value of Δnu(vac,QED)\Delta n_u^{\rm (vac,QED)} predicted by QED: Δnu(vac,QED)=4×1024\Delta n_u^{\rm (vac,QED)}= 4\times 10^{-24} ~T2^{-2}. These birefringence measurements also yield improved model-independent bounds on the coupling constant of axion-like particles to two photons, for masses greater than 1 meV, along with a factor two improvement of the fractional charge limit on millicharged particles (fermions and scalars), including neutrinos

    New PVLAS model independent limit for the axion coupling to γγ\gamma\gamma for axion masses above 1meV

    Full text link
    During 2014 the PVLAS experiment has started data taking with a new apparatus installed at the INFN Section of Ferrara, Italy. The main target of the experiment is the observation of magnetic birefringence of vacuum. According to QED, the ellipticity generated by the magnetic birefringence of vacuum in the experimental apparatus is expected to be ψ(QED)5×1011\psi^{\rm(QED)} \approx 5\times10^{-11}. No ellipticity signal is present so far with a noise floor ψ(noise)2.5×109\psi^{\rm(noise)} \approx 2.5\times10^{-9} after 210 hours of data taking. The resulting ellipticity limit provides the best model independent upper limit on the coupling of axions to γγ\gamma\gamma for axion masses above 10310^{-3}eV

    Measurement of the Cotton Mouton effect of water vapour

    Full text link
    In this paper we report on a measurement of the Cotton Mouton effect of water vapour. Measurement performed at room temperature (T=301T=301 K) with a wavelength of 1064 nm gave the value Δnu=(6.67±0.45)1015\Delta n_u = (6.67 \pm 0.45) \cdot 10^{-15} for the unit magnetic birefringence (1 T magnetic field and atmospheric pressure)

    Entorno de Desarrollo Ptolemy

    Get PDF
    Dentro del diseño digital, el Codiseño de Hardware (HW) / Software (SW) permite el desarrollo simultáneo de sistemas con componentes hardware y componentes software, buscando explotar las ventajas que ofrece cada alternativa y permitiendo fácilmente el rediseño de forma natural. El papel que juega Ptolemy en la problemática del Codiseño, es que gracias a sus características jerárquicas se presenta como un marco especial para el modelado, simulación y síntesis de software de sistemas embebidos, de tiempo real y concurrentes. En este trabajo se realiza el estudio detallado de un entorno de programación para su utilización en diseño de sistemas digitales

    Cultura material, construcción de identidades y transformaciones sociales en el Valle de Ambato durante el primer milenio d. C.

    Get PDF
    En esta investigación nos interrogamos por las formas de participación de la cultura material en los procesos de construcción de identidades sociales en la segunda mitad del primer milenio de la era en el Valle de Ambato –Catamarca, Argentina-. Este interrogante se vincula a problemáticas mayores, que desde hace al menos 30 años el Proyecto Arqueológico Ambato viene desarrollando en la zona, relacionadas con el surgimiento en el valle -alrededor del cuarto o quinto siglo del primer milenio- de relaciones sociales con mayor grado de exclusión que las formas organizativas anteriores. Estas nuevas relaciones habrían producido la institucionalización de desigualdades sociales inéditas para la región y la época. Concretamente, en este contexto, nos interesa dilucidar las formas específicas en que la cultura material participó en la constitución, legitimación y reproducción de la identidades sociales surgidas como parte del proceso de transformación social mencionado. El interés de focalizarnos en la participación de la cultura material en los procesos de construcción de identidades responde a la inquietud de que la misma no sólo conforma el registro visible con el que trabajamos los arqueólogos, sino que puede ser considerada un elemento activo –y podríamos plantear un “agente” más- de dicho proceso. Esta posición nos permite marcar ciertas limitaciones, pero también retomar los aportes del lugar históricamente ocupado por la cultura material en las investigaciones que se abocaron a estudiar los procesos de cambio señalados en el Valle de Ambato. La misma fue considerada como reflejo de la influencia de pueblos evolucionados de los Andes Centrales o como indicadora de procesos locales de cambios. Por otro lado, dentro de un panorama teórico más general, nos permite discutir aquellas posiciones esencialistas, materialistas y constructivistas de la constitución de las identidades y su relación con las cosas, en las que los objetos y sujetos quedaron ubicados en laderas opuestas, permitiéndonos establecer ciertos puentes entre ambos. En este sentido, extraemos a los objetos de aquellos marcos según los cuales éstos se transforman en espejos de esencias reificadas –la cultura en las posiciones normativas-; de aquellos donde éstos adquieren sentido sólo en relación al plexo funcional donde participan, siendo sólo productos de necesidades de los individuos que los preceden –posiciones materialistas vinculadas a la Nueva Arqueología- y de aquellos enfoques que pretenden encontrar al sujeto detrás del artefacto, siendo este último solo producto de un red intersubjetiva de significados -visiones constructivistas-. Retomando la serie de investigaciones producidas recientemente en el Valle de Ambato donde la cultura material fue adquiriendo cada vez más un rol activo, planteamos una posición alternativa donde sujetos y objetos se coproducen activamente en el tiempo. Así, a nivel metodológico realizamos una inversión de perspectiva: los objetos son analizados como si fueran personas con particulares trayectorias biográficas y los sujetos se analizan como si fueran artefactos, haciendo énfasis en la producción del cuerpo. Ambas perspectivas por sí solas resultan insuficientes para comprender los procesos de construcción de identidades sociales y su vinculación con la cultura material, por lo que finalmente, estas dos perspectivas invertidas son imbricadas construyendo una serie de cartografías donde se observan los encuentros, conjunciones y diseminaciones de estas biografías y los sujetos a los cuales dichos objetos se vincularon. Un conjunto de objetos son los protagonistas de las biografías que reconstruimos: vasijas de cerámica. Objetos que se mueven por distintas manos y contextos y de esta forma acumulan determinadas historias y diferentes significados sociales. Así, al ir delineando las trayectorias biográficas reconstruidas de estas vasijas iremos transitando por diferentes espacios, escalas y contextos a lo largo de toda la temporalidad señalada. Las trayectorias biográficas trazadas de estos objetos, son entrecruzadas con las formas materiales en que las personas fueron producidas. Particularmente hacemos hincapié en el cuerpo como ámbito de acción central, tanto en un sentido genético (socialización) como crónico (práctica cotidiana) de la subjetivación. Las cartografías reconstruidas nos marcan las sendas seguidas por estos objetos y sujetos en el espacio social del Valle de Ambato a lo largo de la temporalidad abarcada, y de esta forma nos permiten mostrar de qué manera en el valle las múltiples agencias — humanas y no humanas— continuamente se constituyeron unas a otras en redes de percepción y acción, haceres y saberes, representaciones y prácticas. Por otro lado el análisis de las cartografías reconstruidas en el largo término nos permite comprender de qué forma las mismas lograron producirse y reproducirse a lo largo de al menos siete siglos.Facultad de Ciencias Naturales y Muse
    corecore