The fate of the 2√3 × 2√3R(30°) silicene phase on Ag(111)

Silicon atoms deposited on Ag(111) produce various single layer silicene sheets with different buckling patterns and periodicities. Low temperature scanning tunneling microscopy reveals that one of the silicene sheets, the hypothetical √7 × √7 silicene structure, on 2√3 × 2√3 Ag(111), is inherently highly defective and displays no long-range order. Moreover, Auger and photoelectron spectroscopy measurements reveal its sudden death, to end, in a dynamic fating process at ∼300 °C. This result clarifies the real nature of the 2√3 × 2√3R(30°) silicene phase and thus helps to understand the diversity of the silicene sheets grown on Ag(111)

MoO3 films grown on polycrystalline Cu: Morphological, structural, and electronic properties

In this work, the authors investigated MoO3 films with thickness between 30 nm and 1 μm grown at room temperature by solid phase deposition on polycrystalline Cu substrates. Atomic force microscopy, scanning electron microscopy, and scanning tunneling microscopy revealed the presence of a homogenous MoO3 film with a "grainlike" morphology, while Raman spectroscopy showed an amorphous character of the film. Nanoindentation measurements evidenced a coating hardness and stiffness comparable with the copper substrate ones, while Auger electron spectroscopy, x-ray absorption spectroscopy, and secondary electron spectroscopy displayed a pure MoO3 stoichiometry and a work function Φ MoO3 = 6.5 eV, 1.8 eV higher than that of the Cu substrate. MoO3 films of thickness between 30 and 300 nm evidenced a metallic behavior, whereas for higher thickness, the resistance-temperature curves showed a semiconducting character

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Muscle oxygenation and pulmonary gas exchange kinetics during cycling exercise on-transitions in humans

Near-infrared spectroscopy (NIRS) was utilized to gain insights into the kinetics of oxidative metabolism during exercise transitions. Ten untrained young men were tested on a cycle ergometer during transitions from unloaded pedaling to 5 min of constant-load exercise below (VT) the ventilatory threshold. Vastus lateralis oxygenation was determined by NIRS, and pulmonary O2 uptake (Vo --> Vo2) was determined breath-by-breath. Changes in deoxygenated hemoglobin + myoglobin concentration Delta[deoxy(Hb + Mb)] were taken as a muscle oxygenation index. At the transition, [Delta[deoxy(Hb + Mb)]] was unmodified [time delay (TD)] for 8.9 +/- 0.5 s at VT (both significantly different from 0) and then increased, following a monoexponential function [time constant (tau) = 8.5 +/- 0.9 s for VT]. For >VT a slow component of Delta[deoxy(Hb + Mb)] on-kinetics was observed in 9 of 10 subjects after 75.0 +/- 14.0 s of exercise. A significant correlation was described between the mean response time (MRT = TD + tau) of the primary component of Delta[deoxy(Hb + Mb)] on-kinetics and the tau of the primary component of the pulmonary Vo2 on-kinetics. The constant muscle oxygenation during the initial phase of the on-transition indicates a tight coupling between increases in O2 delivery and O2 utilization. The lack of a drop in muscle oxygenation at the transition suggests adequacy of O2 availability in relation to needs

Evidence of <i>sp</i>²-like Hybridization of Silicon Valence Orbitals in Thin and Thick Si Grown on α-Phase Si(111)√3 × √3R30°-Bi

One-monolayer (ML) (thin) and 5-ML (thick) Si films were grown on the α-phase Si(111)√3 × √3R30°-Bi at a low substrate temperature of 200 °C. Si films have been studied in situ by reflection electron energy loss spectroscopy (REELS) and Auger electron spectroscopy, as a function of the electron beam incidence angle α and low-energy electron diffraction (LEED), as well as ex situ by grazing incidence X-ray diffraction (GIXRD). Scanning tunneling microscopy (STM), and scanning tunneling spectroscopy (STS) were also reported. The REELS spectra, taken at the Si K absorption edge (~1.840 KeV), reveal the presence of two distinct loss structures attributed to transitions 1s→π* and 1s→σ* according to their intensity dependence on α, attesting to the sp2-like hybridization of the silicon valence orbitals in both thin and thick Si films. The synthesis of a silicon allotrope on the α-phase of Si(111)√3 × √3R30°-Bi substrate was demonstrated by LEED patterns and GIXRD that discloses the presence of a Si stack of 3.099 (3) Å and a √3 × √3 unit cell of 6.474 Å, typically seen for multilayer silicene. STM and STS measurements corroborated the findings. These measurements provided a platform for the new √3 × √3R30° Si allotrope on a Si(111)√3 × √3 R30°-Bi template, paving the way for realizing topological insulator heterostructures from different two-dimensional materials, Bi and Si