105 research outputs found
INCORPORATION OF A CONSIDERATION OF FOULING INTO THE DESIGN OF VERTICAL THERMO-SIPHON RE-BOILERS
Two causes of under-performance within the tubes of vertical thermo-siphon re-boilers (VTR’s) are considered: premature dry-out within the unit and chemical reaction fouling at the tube wall. In many cases dryout is itself a cause of fouling. Both of these causes depend on re-boiler geometry. Some geometry performs satisfactorily. Other geometry performs poorly. There are two basic forms of flow boiling: nucleate flow boiling and convective flow boiling. In nucleate flow boiling part of the vaporisation results from the formation of bubbles of vapour on the heated surface. Unfortunately, a thin liquid film (the micro-layer) formed beneath these bubbles can fully evaporate and dissolved solids can deposit on the heated surface. Under convective flow boiling conditions the vapour shear generated by the two-phase flow results in the formation of a thin liquid film on the tube wall. This film moves at high velocity and provides very effective heat transfer. The result is a marked reduction in wall temperature and suppression of the nucleate boiling process. It is clearly desirable to move from a nucleate boiling mechanism to a convective boiling situation over as short a tube length as possible. The length of tube that is subject to nucleate boiling is again a function of re-boiler geometry. Wall shear is important in suppression of chemical reaction type fouling. Shear is function of recirculation rate and vapour mass quality. Again these factors depend on reboiler geometry. In this paper the authors describe how the better geometry can be identified
Recommended from our members
Incorporating Deposit Ageing into Visualisation of Crude Oil Preheat Train Fouling
Funder: University of CambridgeAbstract: Fouling is an acute problem in crude oil preheat train heat exchangers as it affects the thermal and hydraulic performance of individual units as well as the network. Ageing of fouling deposits complicates these interactions and effective tools for visualising these effects are needed. The modified temperature field plot construction, devised by Graham Polley and co-workers in 2002, allows the impact of fouling on pressure drop and heat duty across individual units and the preheat train to be presented in a systematic way. The simple deposit ageing model of Ishiyama et al. (AIChEJ 56:531–545, 2010a) was incorporated into the analysis of a simple preheat train based on that presented by Panchal and Huang-Fu (Heat Transfer Eng 21:3–9, 2000) to calculate the impact of ageing on fouling dynamics and network performance. The modified temperature field plot is shown to be effective in communicating the impact of fouling and ageing, allowing a designer or operator to be able to interpret correctly what might otherwise be conflicting trends or unexpected behaviour
Recommended from our members
Proceedings of the IAEA specialists` meeting on cracking in LWR RPV head penetrations
This report contains 17 papers that were presented in four sessions at the IAEA Specialists` meeting on Cracking in LWR RPV Head Penetrations held at ASTM Headquarters in Philadelphia on May 2-3, 1995. The papers are compiled here in the order that presentations were made in the sessions, and they relate to operational observations, inspection techniques, analytical modeling, and regulatory control. The goal of the meeting was to allow international experts to review experience in the field of ensuring adequate performance of reactor pressure vessel (RPV) heads and penetrations. The emphasis was to allow a better understanding of RPV material behavior, to provide guidance supporting reliability and adequate performance, and to assist in defining directions for further investigations. The international nature of the meeting is illustrated by the fact that papers were presented by researchers from 10 countries. There were technical experts present form other countries who participated in discussions of the results presented. This present document incorporates the final version of the papers as received from the authors. The final chapter includes conclusions and recommendations. Individual papers have been cataloged separately
Delineating Zinc Influx Mechanisms during Platelet Activation
Zinc (Zn2+) is released by platelets during a hemostatic response to injury. Extracellular zinc ([Zn2+]o) initiates platelet activation following influx into the platelet cytosol. However, the mechanisms that permit Zn2+ influx are unknown. Fluctuations in intracellular zinc ([Zn2+]i) were measured in fluozin-3-loaded platelets using fluorometry and flow cytometry. Platelet activation was assessed using light transmission aggregometry. The detection of phosphoproteins was performed by Western blotting. [Zn2+]o influx and subsequent platelet activation were abrogated by blocking the sodium/calcium exchanged, TRP channels, and ZIP7. Cation store depletion regulated Zn2+ influx. [Zn2+]o stimulation resulted in the phosphorylation of PKC substates, MLC, and β3 integrin. Platelet activation via GPVI or Zn2+ resulted in ZIP7 phosphorylation in a casein kinase 2-dependent manner and initiated elevations of [Zn2+]i that were sensitive to the inhibition of Orai1, ZIP7, or IP3R-mediated pathways. These data indicate that platelets detect and respond to changes in [Zn2+]o via influx into the cytosol through TRP channels and the NCX exchanger. Platelet activation results in the externalization of ZIP7, which further regulates Zn2+ influx. Increases in [Zn2+]i contribute to the activation of cation-dependent enzymes. Sensitivity of Zn2+ influx to thapsigargin indicates a store-operated pathway that we term store-operated Zn2+ entry (SOZE). These mechanisms may affect platelet behavior during thrombosis and hemostasis
What are communities of practice? A comparative review of four seminal works
This paper is a comparative review of four seminal works on communities of practice. It is argued that the ambiguities of the terms community and practice are a source of the concept's reusability allowing it to be reappropriated for different purposes, academic and practical. However, it is potentially confusing that the works differ so markedly in their conceptualizations of community, learning, power and change, diversity and informality. The three earlier works are underpinned by a common epistemological view, but Lave and Wenger's 1991 short monograph is often read as primarily about the socialization of newcomers into knowledge by a form of apprenticeship, while the focus in Brown and Duguid's article of the same year is, in contrast, on improvising new knowledge in an interstitial group that forms in resistance to management. Wenger's 1998 book treats communities of practice as the informal relations and understandings that develop in mutual engagement on an appropriated joint enterprise, but his focus is the impact on individual identity. The applicability of the concept to the heavily individualized and tightly managed work of the twenty-first century is questionable. The most recent work by Wenger – this time with McDermott and Snyder as coauthors – marks a distinct shift towards a managerialist stance. The proposition that managers should foster informal horizontal groups across organizational boundaries is in fact a fundamental redefinition of the concept. However it does identify a plausible, if limited, knowledge management (KM) tool. This paper discusses different interpretations of the idea of 'co-ordinating' communities of practice as a management ideology of empowerment
Topology and chiral symmetry breaking in SU(N) gauge theories
We study the low-lying eigenmodes of the lattice overlap Dirac operator for
SU(N) gauge theories with N=2,3,4 and 5 colours. We define a fermionic
topological charge from the zero-modes of this operator and show that, as N
grows, any disagreement with the topological charge obtained by cooling the
fields, becomes rapidly less likely. By examining the fields where there is a
disagreement, we are able to show that the Dirac operator does not resolve
instantons below a critical size of about rho = 2.5 a, but resolves the larger,
more physical instantons. We investigate the local chirality of the near-zero
modes and how it changes as we go to larger N. We observe that the local
chirality of these modes, which is prominent for SU(2) and SU(3), becomes
rapidly weaker for larger N and is consistent with disappearing entirely in the
limit of N -> infinity. We find that this is not due to the observed
disappearance of small instantons at larger N.Comment: 41 pages, 12 figures, RevTe
Field Measurements of Terrestrial and Martian Dust Devils
Surface-based measurements of terrestrial and martian dust devils/convective vortices provided from mobile and stationary platforms are discussed. Imaging of terrestrial dust devils has quantified their rotational and vertical wind speeds, translation speeds, dimensions, dust load, and frequency of occurrence. Imaging of martian dust devils has provided translation speeds and constraints on dimensions, but only limited constraints on vertical motion within a vortex. The longer mission durations on Mars afforded by long operating robotic landers and rovers have provided statistical quantification of vortex occurrence (time-of-sol, and recently seasonal) that has until recently not been a primary outcome of more temporally limited terrestrial dust devil measurement campaigns. Terrestrial measurement campaigns have included a more extensive range of measured vortex parameters (pressure, wind, morphology, etc.) than have martian opportunities, with electric field and direct measure of dust abundance not yet obtained on Mars. No martian robotic mission has yet provided contemporaneous high frequency wind and pressure measurements. Comparison of measured terrestrial and martian dust devil characteristics suggests that martian dust devils are larger and possess faster maximum rotational wind speeds, that the absolute magnitude of the pressure deficit within a terrestrial dust devil is an order of magnitude greater than a martian dust devil, and that the time-of-day variation in vortex frequency is similar. Recent terrestrial investigations have demonstrated the presence of diagnostic dust devil signals within seismic and infrasound measurements; an upcoming Mars robotic mission will obtain similar measurement types
Ethnoracial Disparities in SARS-CoV-2 Seroprevalence in a Large Cohort of Individuals in Central North Carolina from April to December 2020
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has caused millions of deaths around the world within the past 2 years. Transmission within the United States has been heterogeneously distributed by geography and social factors with little data from North Carolina. Here, we describe results from a weekly cross-sectional study of 12,471 unique hospital remnant samples from 19 April to 26 December 2020 collected by four clinical sites within the University of North Carolina Health system, with a majority of samples from urban, outpatient populations in central North Carolina. We employed a Bayesian inference model to calculate SARS-CoV-2 spike protein immunoglobulin prevalence estimates and conditional odds ratios for seropositivity. Furthermore, we analyzed a subset of these seropositive samples for neutralizing antibodies. We observed an increase in seroprevalence from 2.9 (95% confidence interval [CI], 1.8 to 4.5) to 12.8 (95% CI, 10.6 to 15.2) over the course of the study. Latinx individuals had the highest odds ratio of SARS-CoV-2 exposure at 6.56 (95% CI, 4.66 to 9.44). Our findings aid in quantifying the degree of asymmetric SARS-CoV-2 exposure by ethnoracial grouping. We also find that 49% of a subset of seropositive individuals had detectable neutralizing antibodies, which was skewed toward those with recent respiratory infection symptoms
Application of homogenization theory to the study of trabecular bone mechanics
It is generally accepted that the strength and stiffness of trabecular bone is strongly affected by trabecular microstructure. It has also been hypothesized that stress induced adaptation of trabecular bone is affected by trabecular tissue level stress and/or strain. At this time, however, there is no generally accepted (or easily accomplished) technique for predicting the effect of microstructure on trabecular bone apparent stiffness and strength or estimating tissue level stress or strain. In this paper, a recently developed mechanics theory specifically designed to analyze microstructured materials, called the homogenization theory, is presented and applied to analyze trabecular bone mechanics. Using the homogenization theory it is possible to perform microstructural and continuum analyses separately and then combine them in a systematic manner. Stiffness predictions from two different microstructural models of trabecular bone show reasonable agreement with experimental results, depending on metaphyseal region, (R2>0.5 for proximal humerus specimens, R2 <0.5 for distal femur and proximal tibia specimens). Estimates of both microstructural strain energy density (SED) and apparent SED show that there are large differences (up to 30 times) between apparent SED (as calculated by standard continuum finite element analyses) and the maximum microstructural or tissue SED. Furthermore, a strut and spherical void microstructure gave very different estimates of maximum tissue SED for the same bone volume fraction (BV/TV). The estimates from the spherical void microstructure are between 2 and 20 times greater than the strut microstructure at 10-20% BV/TV.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/29647/1/0000736.pd
- …