1,375 research outputs found
Inventory control for point-of-use locations in hospitals
Most inventory management systems at hospital departments are characterised by lost sales, periodic reviews with short lead times, and limited storage capacity. We develop two types of exact models that deal with all these characteristics. In a capacity model, the service level is maximised subject to a capacity restriction, and in a service model the required capacity is minimised subject to a service level restriction. We also formulate approximation models applicable for any lost-sales inventory system (cost objective, no lead time restrictions etc). For the capacity model, we develop a simple inventory rule to set the reorder levels and order quantities. Numerical results for this inventory rule show an average deviation of 1% from the optimal service levels. We also embed the single-item models in a multi-item system. Furthermore, we compare the performance of fixed order size replenishment policies and (R, s, S) policies
Ultrathin 2 nm gold as ideal impedance-matched absorber for infrared light
Thermal detectors are a cornerstone of infrared (IR) and terahertz (THz)
technology due to their broad spectral range. These detectors call for suitable
broad spectral absorbers with minimalthermal mass. Often this is realized by
plasmonic absorbers, which ensure a high absorptivity butonly for a narrow
spectral band. Alternativly, a common approach is based on impedance-matching
the sheet resistance of a thin metallic film to half the free-space impedance.
Thereby, it is possible to achieve a wavelength-independent absorptivity of up
to 50 %, depending on the dielectric properties of the underlying substrate.
However, existing absorber films typicallyrequire a thickness of the order of
tens of nanometers, such as titanium nitride (14 nm), whichcan significantly
deteriorate the response of a thermal transducers. Here, we present the
application of ultrathin gold (2 nm) on top of a 1.2 nm copper oxide seed layer
as an effective IR absorber. An almost wavelength-independent and long-time
stable absorptivity of 47(3) %, ranging from 2 m to 20 m, could be
obtained and is further discussed. The presented gold thin-film represents
analmost ideal impedance-matched IR absorber that allows a significant
improvement of state-of-the-art thermal detector technology
Search for the standard model Higgs boson in tau final states
We present a search for the standard model Higgs boson using hadronically
decaying tau leptons, in 1 inverse femtobarn of data collected with the D0
detector at the Fermilab Tevatron ppbar collider. We select two final states:
tau plus missing transverse energy and b jets, and tau+ tau- plus jets. These
final states are sensitive to a combination of associated W/Z boson plus Higgs
boson, vector boson fusion and gluon-gluon fusion production processes. The
observed ratio of the combined limit on the Higgs production cross section at
the 95% C.L. to the standard model expectation is 29 for a Higgs boson mass of
115 GeV.Comment: publication versio
Second Generation Leptoquark Search in p\bar{p} Collisions at = 1.8 TeV
We report on a search for second generation leptoquarks with the D\O\
detector at the Fermilab Tevatron collider at = 1.8 TeV.
This search is based on 12.7 pb of data. Second generation leptoquarks
are assumed to be produced in pairs and to decay into a muon and quark with
branching ratio or to neutrino and quark with branching ratio
. We obtain cross section times branching ratio limits as a function
of leptoquark mass and set a lower limit on the leptoquark mass of 111
GeV/c for and 89 GeV/c for at the 95%\
confidence level.Comment: 18 pages, FERMILAB-PUB-95/185-
Measurement of the p-pbar -> Wgamma + X cross section at sqrt(s) = 1.96 TeV and WWgamma anomalous coupling limits
The WWgamma triple gauge boson coupling parameters are studied using p-pbar
-> l nu gamma + X (l = e,mu) events at sqrt(s) = 1.96 TeV. The data were
collected with the DO detector from an integrated luminosity of 162 pb^{-1}
delivered by the Fermilab Tevatron Collider. The cross section times branching
fraction for p-pbar -> W(gamma) + X -> l nu gamma + X with E_T^{gamma} > 8 GeV
and Delta R_{l gamma} > 0.7 is 14.8 +/- 1.6 (stat) +/- 1.0 (syst) +/- 1.0 (lum)
pb. The one-dimensional 95% confidence level limits on anomalous couplings are
-0.88 < Delta kappa_{gamma} < 0.96 and -0.20 < lambda_{gamma} < 0.20.Comment: Submitted to Phys. Rev. D Rapid Communication
Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt{s} = 1.96 TeV using Kinematic Characteristics of Lepton + Jets Events
We present a measurement of the top quark pair ttbar production cross section
in ppbar collisions at a center-of-mass energy of 1.96 TeV using 230 pb**{-1}
of data collected by the DO detector at the Fermilab Tevatron Collider. We
select events with one charged lepton (electron or muon), large missing
transverse energy, and at least four jets, and extract the ttbar content of the
sample based on the kinematic characteristics of the events. For a top quark
mass of 175 GeV, we measure sigma(ttbar) = 6.7 {+1.4-1.3} (stat) {+1.6- 1.1}
(syst) +/-0.4 (lumi) pb, in good agreement with the standard model prediction.Comment: submitted to Phys.Rev.Let
Measurement of the B0_s semileptonic branching ratio to an orbitally excited D_s** state, Br(B0_s -> Ds1(2536) mu nu)
In a data sample of approximately 1.3 fb-1 collected with the D0 detector
between 2002 and 2006, the orbitally excited charm state D_s1(2536) has been
observed with a measured mass of 2535.7 +/- 0.6 (stat) +/- 0.5 (syst) MeV via
the decay mode B0_s -> D_s1(2536) mu nu X. A first measurement is made of the
branching ratio product Br(b(bar) -> D_s1(2536) mu nu X).Br(D_s1(2536)->D*
K0_S). Assuming that D_s1(2536) production in semileptonic decay is entirely
from B0_s, an extraction of the semileptonic branching ratio Br(B0_s ->
D_s1(2536) mu nu X) is made.Comment: 7 pages, 2 figures, LaTeX, version with minor changes as accepted by
Phys. Rev. Let
Search for R-parity violating supersymmetry via the LLE couplings lambda_{121}, lambda_{122} or lambda_{133} in ppbar collisions at sqrt(s)=1.96 TeV
A search for gaugino pair production with a trilepton signature in the
framework of R-parity violating supersymmetry via the couplings lambda_121,
lambda_122, or lambda_133 is presented. The data, corresponding to an
integrated luminosity of L~360/pb, were collected from April 2002 to August
2004 with the D0 detector at the Fermilab Tevatron Collider, at a
center-of-mass energy of sqrt(s)=1.96 TeV. This analysis considers final states
with three charged leptons with the flavor combinations eel, mumul, and eetau
(l=e or mu). No evidence for supersymmetry is found and limits at the 95%
confidence level are set on the gaugino pair production cross section and lower
bounds on the masses of the lightest neutralino and chargino are derived in two
supersymmetric models.Comment: 9 pages, 4 figures (fig2 includes 3 subfigures
Simultaneous measurement of the ratio B(t->Wb)/B(t->Wq) and the top quark pair production cross section with the D0 detector at sqrt(s)=1.96 TeV
We present the first simultaneous measurement of the ratio of branching
fractions, R=B(t->Wb)/B(t->Wq), with q being a d, s, or b quark, and the top
quark pair production cross section sigma_ttbar in the lepton plus jets channel
using 0.9 fb-1 of ppbar collision data at sqrt(s)=1.96 TeV collected with the
D0 detector. We extract R and sigma_ttbar by analyzing samples of events with
0, 1 and >= 2 identified b jets. We measure R = 0.97 +0.09-0.08 (stat+syst) and
sigma_ttbar = 8.18 +0.90-0.84 (stat+syst)} +/-0.50 (lumi) pb, in agreement with
the standard model prediction.Comment: submitted to Phys.Rev.Letter
Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt(s)=1.96 TeV using Lepton + Jets Events with Lifetime b-tagging
We present a measurement of the top quark pair () production cross
section () in collisions at TeV
using 230 pb of data collected by the D0 experiment at the Fermilab
Tevatron Collider. We select events with one charged lepton (electron or muon),
missing transverse energy, and jets in the final state. We employ
lifetime-based b-jet identification techniques to further enhance the
purity of the selected sample. For a top quark mass of 175 GeV, we
measure pb, in
agreement with the standard model expectation.Comment: 7 pages, 2 figures, 3 tables Submitted to Phys.Rev.Let
- …