Technical report: Characteristics of silage based on sweetpotato with combinations of local feed resources in Uganda.

A study to determine the characteristics and chemical composition of different silages based on sweetpotato vines in combination with several local feed resources was conducted in the Animal Science laboratory at the Makerere University Agricultural Research Institute, Kabanyolo (MUARIK). Sweetpotato vines from variety NASPOT 11 were used. Maize bran and cassava root were used as ferment starters (additives) during the ensiling process. The silages were analyzed for pH, moisture content, crude protein, neutral detergent fiber, ether extracts and ash, calcium and phosphorus. The results showed that sweetpotato vines can produce silage of acceptable quality even when no external ferment starter is added. However, addition of a solid ferment starter like maize bran served to absorb the moisture that would accumulate as effluent at the bottom of the silo and eventually lead to spoilage. The dry matter content of the silage was low (> 24%) and would not meet the requirements of young growing pigs. The resultant silage had crude protein content higher than 19 percent and would meet the requirements for growing pigs except for the balance of essential amino acids and low dry matter of the material. For efficient utilization, feeding sweetpotato silage diets would require supplementation to satisfy requirements for dry matter and essential amino acids

Numerical Prediction of Nucleate Pool Boiling Heat Transfer Coefficient under High Heat Fluxes

This paper presents computational fluid dynamics approach to prediction of the heat transfer coefficient for nucleate pool boiling under high heat fluxes. The 3-D numerical simulations of the atmospheric saturated pool boiling are performed. Mathematical modelling of pool boiling requires a treatment of vapor-liquid two-phase mixture on the macro level, as well as on the micro level, such as bubble growth and departure from the heating surface. Two-phase flow is modelled by the two-fluid model, which consists of the mass, momentum, and energy conservation equations for each phase. Interface transfer processes are calculated by the closure laws. Micro level phenomena on the heating surface are modelled with the bubble nucleation site density, the bubble resistance time on the heating wall and with the certain level of randomness in the location of bubble nucleation sites. The developed model was used to determine the heat transfer coefficient and results of numerical simulations are compared with available experimental results and several empirical correlations. A considerable scattering of the predictions of the pool boiling heat transfer coefficient by experimental correlations is observed, while the numerically predicted values are within the range of results calculated by well-known Kutateladze, Mostinski, Kruzhilin, and Rohsenow correlations. The presented numerical modelling approach is original regarding both the application of the two-fluid two-phase model for the determination of heat transfer coefficient in pool boiling and the defined boundary conditions at the heated wall surface

A double-blind randomized controlled trial of maternal postpartum deworming to improve infant weight gain in the Peruvian Amazon

Background : Nutritional interventions targeting the critical growth and development period before two years of age can have the greatest impact on health trajectories over the life course. Compelling evidence has demonstrated that interventions investing in maternal health in the first 1000 days of life are beneficial for both mothers and their children. One such potential intervention is deworming integrated into maternal postpartum care in areas where soil-transmitted helminth (STH) infections are endemic. Methodology/Principal Findings : From February to August 2014, 1010 mother-infant pairs were recruited into a trial aimed at assessing the effectiveness of maternal postpartum deworming on infant and maternal health outcomes. Following delivery, mothers were randomly assigned to receive either single-dose 400 mg albendazole or placebo. Participants were followed-up at 1 and 6 months postpartum. There was no statistically significant difference in mean weight gain between infants in the experimental and control groups (mean difference: -0.02; 95% CI: -0.1, 0.08) at 6 months of age. Further, deworming had no effect on measured infant morbidity indicators. However, ad hoc analyses restricted to mothers who tested positive for STHs at baseline suggest that infants of mothers in the experimental group had greater mean length gain in cm (mean difference: 0.8; 95% CI: 0.1, 1.4) and length-for-age z-score (mean difference: 0.5; 95% CI: 0.2, 0.8) at 6 months of age. Conclusions/Significance : In a study population composed of both STH-infected and uninfected mothers, maternal postpartum deworming was insufficient to impact infant growth and morbidity indicators up to 6 months postpartum. Among STH-infected mothers, however, important improvements in infant length gain and length-for-age were observed. The benefits of maternal postpartum deworming should be further investigated in study populations having higher overall prevalences and intensities of STH infections and, in particular, where whipworm and hookworm infections are of public health concern

Surface and thermomechanical characterization of polyurethane networks based on poly(dimethylsiloxane) and hyperbranched polyester

Two series of polyurethane (PU) networks based on Boltorn® hyperbranched polyester (HBP) and hydroxyethoxy propyl terminated poly(dimethylsiloxane) (EO-PDMS) or hydroxy propyl terminated poly(dimethylsiloxane) (HPPDMS), were synthesized. The effect of the type of soft PDMS segment on the properties of PUs was investigated by Fourier transform infrared spectroscopy (FTIR), contact angle measurements, surface free energy determination, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), dynamic mechanical thermal analysis (DMTA) and differential scanning calorimetry (DSC). The surface characterization of PUs showed existence of slightly amphiphilic character and it revealed that PUs based on HP-PDMS have lower surface free energy, more hydrophobic surface and better waterproof performances than PUs based on EO-PDMS. PUs based on HPPDMS had higher crosslinking density than PUs based on EO-PDMS. DSC and DMTA results revealed that these newlysynthesized PUs exhibit the glass transition temperatures of the soft and hard segments. DMTA, SEM and AFM results confirmed existence of microphase separated morphology. The results obtained in this work indicate that PU networks based on HBP and PDMS have improved surface and thermomechanical properties

Applying multi-criteria analysis for preliminary assessment of the properties of alginate immobilized Myriophyllum spicatum in lake water samples

The preliminary assessment of the properties of alginate immobilized aquatic weed Myriophyllum spicatum beads-MsAlg in a multi-element system of nine Serbian lakes water samples was done. Herein, the results obtained in the biosorption experiment with MsAlg contents of twenty-two elements analysed by inductively coupled plasma-optical emission spectrometry, biosorption capacity, element removal efficiency, total hardness (TH) and quality index of water (WQI) are presented. Scanning electron microscopy with energy dispersive X-ray spectroscopy was used for the characterization of M. spicatum and its beads. The study showed that aluminium, magnesium and strontium were adsorbed by MsAlg in the water samples from all examined lakes; barium and iron in the water samples from six lakes. The overall average efficiency of MsAlg in biosorption of elements was in the following order: Al > Ba > Sr > Fe > Mg (58.6, 51.7, 48.2, 23.9 and 17.7%, respectively). The increase of TH and WQI values after the biosorption was noticed in all studied lake water samples. The most significant correlations for pH were regarding the contents of B, Mg and Ca, whereas WQI was highly correlated to the contents of B and Mg, and pH. The complexity of the obtained data was explained by Cluster Analysis and Principal Component Analysis, which showed good discrimination capabilities between the water samples taken from different locations. Considering that the invasive M. spicatum is natural, widespread and that its immobilization is cheap and eco-friendly, presented findings could be helpful in further assessment of MsAlg beads for its potential use as biofilter

Chemical Characterization and Antibacterial Activity of Essential Oil of Medicinal Plants from Eastern Serbia

The objective of this study was to evaluate wild growing Satureja kitaibelii, Thymus serpyllum, Origanum vulgare, Achillea millefolium and Achillea clypeolata with respect to their essential oil (EO) content, composition and antimicrobial activity. The five species were collected at Mt. Rtanj and the village of Sesalac, Eastern Serbia. The main EO constituents of Lamiaceae plants were p-cymene (24.4%), geraniol (63.4%) and germacrene D (21.5%) in Satureja kitaibelii, Thymus serpyllum and Origanum vulgare ssp. vulgare, respectively. A. millefolium EO had multiple constituents with major ones being camphor (9.8%), caryophyllene oxide (6.5%), terpinen-4-ol (6.3%) and 1,8-cineole (5.6%), while the main EO constituents of A. clypeolata were 1,8-cineole (45.1%) and camphor (18.2%). Antimicrobial testing of the EO showed that Staphylococcus aureus (Gram-positive) was more sensitive to all of the tested EOs than Escherichia coli (Gram-negative). S. kitaibelii EO showed the highest antimicrobial activity against both tested bacterial strains. This is the first study to characterize the EO composition and antimicrobial activity of these five medicinal species from Eastern Serbia in comparison with comprehensive literature data. The results can be utilized by the perfumery, cosmetics, food and pharmaceutical industries, but also for healing purposes in self-medication

Seasonal Variations in Essential Oil Composition of Immortelle Cultivated in Serbia

Our previous research has proven that the immortelle (Helichrysum italicum) essential oil (EO) grown in Serbia possesses respectable biological potential and desirable composition of volatile compounds with the potential for a wide range of applications in the food, cosmetics, and pharmaceutical industries. Within this study, the impact of seasonal variations (temperature, precipitation, and insolation) during three successive years (2017, 2018, and 2019), on the volatile profile of γ-curcumene + ar-curcumene immortelle chemotype was determined. Steam distillation was utilized to extract EO from the plant material, followed by chromatographic mass spectrometric analysis revealing 50 volatile compounds. A multiple linear regression model was developed, and principal component analyses were conducted to deliver detailed information regarding the prediction, component profile, and parallel contents of active compounds of the immortelle EO. Under Serbian agro-ecological conditions, with appropriate harvest method, immortelle can achieve two harvests per year: the first in July, and the second in August. The γ-curcumene + ar-curcumene chemotype usually occurs as the dominant chemotype in the region of the ex-Yugoslavia countries. This chemotype probably developed as an adaptation to climatic conditions, and spring and summer precipitation positively influenced curcumene accumulation in plants. Such a phenomenon was especially noticeable in the first harvest