237 research outputs found
Recommended from our members
The East Midlands in 2010
The East Midlands in 2010 is the updated evidence base that supports the regional economic strategy, A Flourishing Region. It presents a statistical portrait of the region covering demography, housing, economy & productivity, the labour market, deprivation & economic inclusion, transport, infrastructure & development, the environment and the spatial structure of the economy along with a series of sub-regional profiles
Filler bar heating due to stepped tiles in the shuttle orbiter thermal protection system
An analytical study was performed to investigate the excessive heating in the tile to tile gaps of the Shuttle Orbiter Thermal Protection System due to stepped tiles. The excessive heating was evidence by visible discoloration and charring of the filler bar and strain isolation pad that is used in the attachment of tiles to the aluminum substrate. Two tile locations on the Shuttle orbiter were considered, one on the lower surface of the fuselage and one on the lower surface of the wing. The gap heating analysis involved the calculation of external and internal gas pressures and temperatures, internal mass flow rates, and the transient thermal response of the thermal protection system. The results of the analysis are presented for the fuselage and wing location for several step heights. The results of a study to determine the effectiveness of a half height ceramic fiber gap filler in preventing hot gas flow in the tile gaps are also presented
Recertification of the air and methane storage vessels at the Langley 8-foot high-temperature structures tunnel
This center operates a number of sophisticated wind tunnels in order to fulfill the needs of its researchers. Compressed air, which is kept in steel storage vessels, is used to power many of these tunnels. Some of these vessels have been in use for many years, and Langley is currently recertifying these vessels to insure their continued structural integrity. One of the first facilities to be recertified under this program was the Langley 8-foot high-temperature structures tunnel. This recertification involved (1) modification, hydrotesting, and inspection of the vessels; (2) repair of all relevant defects; (3) comparison of the original design of the vessel with the current design criteria of Section 8, Division 2, of the 1974 ASME Boiler and Pressure Vessel Code; (4) fracture-mechanics, thermal, and wind-induced vibration analyses of the vessels; and (5) development of operating envelopes and a future inspection plan for the vessels. Following these modifications, analyses, and tests, the vessels were recertified for operation at full design pressure (41.4 MPa (6000 psi)) within the operating envelope developed
Progress towards an accurate determination of the Boltzmann constant by Doppler spectroscopy
In this paper, we present significant progress performed on an experiment
dedicated to the determination of the Boltzmann constant, k, by accurately
measuring the Doppler absorption profile of a line in a gas of ammonia at
thermal equilibrium. This optical method based on the first principles of
statistical mechanics is an alternative to the acoustical method which has led
to the unique determination of k published by the CODATA with a relative
accuracy of 1.7 ppm. We report on the first measurement of the Boltzmann
constant by laser spectroscopy with a statistical uncertainty below 10 ppm,
more specifically 6.4 ppm. This progress results from improvements in the
detection method and in the statistical treatment of the data. In addition, we
have recorded the hyperfine structure of the probed saQ(6,3) rovibrational line
of ammonia by saturation spectroscopy and thus determine very precisely the
induced 4.36 (2) ppm broadening of the absorption linewidth. We also show that,
in our well chosen experimental conditions, saturation effects have a
negligible impact on the linewidth. Finally, we draw the route to future
developments for an absolute determination of with an accuracy of a few ppm.Comment: 22 pages, 11 figure
Exploring the radio-loudness of SDSS quasars with spectral stacking
© 2024 The Author(s). Published by Oxford University Press on behalf of Royal Astronomical Society. This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY), https://creativecommons.org/licenses/by/4.0/We use new 144 MHz observations over 5634 deg 2 from the LOFAR (Low Frequency Array) Two-metre Sky Survey (LoTSS) to compile the largest sample of uniformly selected, spectroscopically confirmed quasars from the 14th data release of the Sloan Digital Sky Survey (SDSS-DR14). Using the classical definition of radio loudness, R = log (L 1.4GHz/L i), we identify 3697 radio-loud (RL) and 111 132 radio-quiet (RQ) sources at 0.6 < z < 3.4. To study their properties, we develop a new rest-frame spectral stacking algorithm, designed with forthcoming massively multiplexed spectroscopic surveys in mind, and use it to create high signal-to-noise composite spectra of each class, matched in redshift and absolute i-band magnitude. We show that RL quasars have redder continuum and enhanced [O II] emission than their RQ counterparts. These results persist when additionally matching in black hole mass, suggesting that this parameter is not the defining factor in making a quasi-stellar object (QSO) RL. We find that these features are not gradually varying as a function of radio loudness, but are maintained even when probing deeper into the RQ population, indicating that a clear-cut division in radio loudness is not apparent. Upon examining the star formation rates (SFRs) inferred from the [O II] emission line, with the contribution from active galactic nucleus removed using the [Ne V] line, we find that RL quasars have a significant excess of star formation relative to RQ quasars out to z = 1.9 at least. Given our findings, we suggest that RL sources either preferably reside in gas-rich systems with rapidly spinning black holes, or represent an earlier obscured phase of QSO evolution.Peer reviewe
The re-regulation of broadcasting: Or the mill owners’ triumph
Discusses the driving forces behind the Communications Bill 2001 of Great Britain. Terms of the bill; Arguments concerning the re-regulation
Volume Characteristics of Landslides Triggered by the MW 7.8 2016 Kaikōura Earthquake, New Zealand, Derived From Digital Surface Difference Modeling
We use a mapped landslide inventory coupled with a 2‐m resolution vertical difference model covering an area of 6,875 km2 to accurately constrain landslide volume‐area relationships. We use the difference model to calculate the source volumes for landslides triggered by the MW 7.8 Kaikōura, New Zealand, earthquake of 14 November 2016. Of the 29,519 mapped landslides in the inventory, 28,394 are within the analysis area, and of these, we have calculated the volume of 17,256 source areas that are ≥90% free of debris. Of the 28,394 landslides, about 80% are classified as soil or rock avalanches and the remainder as mainly translational slides. Our results show that both the soil avalanches and the rock avalanches, ignoring their source geology, have area to volume power‐law scaling exponents (γ) of 0.921 to 1.060 and 1.040 to 1.138, respectively. These are lower than the γ values of 1.1–1.3 (for soil) and 1.3–1.6 (for rock) reported in the literature for undifferentiated landslide types. They are, however, similar to those γ values estimated from other coseismic landslide inventories. In contrast, for 50 selected rotational, translational (planar slide surfaces), or compound slides, where much of the debris remains in the source area, we found γ values range between 1.46 and 1.47, indicating that their slide surfaces were considerably deeper than those landslides classified as avalanches. This study, like previous studies on coseismic landslides, shows that soil and rock avalanches (disrupted landslides) are the dominant landslide type triggered by earthquakes and that they tend to be shallow.Key PointsWe use a 2‐m resolution vertical difference model to estimate source volumes for 17,256 landslides with sources ≥90% free of debris triggered by the MW7.8 2016 Kaikōura EarthquakeThe model was derived by subtracting a tectonically adjusted pre‐EQ surface model from a post‐EQ model, covering an area of 6,875 km2Landslide trigger mechanism, type/failure mode, and source material are critical for accurate estimation of landslide volumes from source‐area geometriesPeer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/156166/2/jgrf21176.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/156166/1/jgrf21176_am.pd
The Effects of Earthquakes and Fluids on the Metamorphism of the Lower Continental Crust
Rock rheology and density have first‐order effects on the lithosphere's response to plate tectonic forces at plate boundaries. Changes in these rock properties are controlled by metamorphic transformation processes that are critically dependent on the presence of fluids. At the onset of a continental collision, the lower crust is in most cases dry and strong. However, if exposed to internally produced or externally supplied fluids, the thickened crust will react and be converted into a mechanically weaker lithology by fluid‐driven metamorphic reactions. Fluid introduction is often associated with deep crustal earthquakes. Microstructural evidence, suggest that in strong highly stressed rocks, seismic slip may be initiated by brittle deformation and that wall‐rock damage caused by dynamic ruptures plays a very important role in allowing fluids to enter into contact with dry and highly reactive lower crustal rocks. The resulting metamorphism produces weaker rocks which subsequently deform by viscous creep. Volumes of weak rocks contained in a highly stressed environment of strong rocks may experience significant excursions toward higher pressure without any associated burial. Slow and highly localized creep processes in a velocity strengthening regime may produce mylonitic shear zones along faults initially characterized by earthquake‐generated frictional melting and wall rock damage. However, stress pulses from earthquakes in the shallower brittle regime may kick start new episodes of seismic slip at velocity weakening conditions. These processes indicate that the evolution of the lower crust during continental collisions is controlled by the transient interplay between brittle deformation, fluid‐rock interactions, and creep flow
The fundamental constants and their variation: observational status and theoretical motivations
This article describes the various experimental bounds on the variation of
the fundamental constants of nature. After a discussion on the role of
fundamental constants, of their definition and link with metrology, the various
constraints on the variation of the fine structure constant, the gravitational,
weak and strong interactions couplings and the electron to proton mass ratio
are reviewed. This review aims (1) to provide the basics of each measurement,
(2) to show as clearly as possible why it constrains a given constant and (3)
to point out the underlying hypotheses. Such an investigation is of importance
to compare the different results, particularly in view of understanding the
recent claims of the detections of a variation of the fine structure constant
and of the electron to proton mass ratio in quasar absorption spectra. The
theoretical models leading to the prediction of such variation are also
reviewed, including Kaluza-Klein theories, string theories and other
alternative theories and cosmological implications of these results are
discussed. The links with the tests of general relativity are emphasized.Comment: 56 pages, l7 figures, submitted to Rev. Mod. Phy
Dynamic liquefaction of shear zones in intact loess during simulated earthquake loading
The 2010-2011 Canterbury earthquake sequence in New Zealand exposed loess-mantled slopes in the area to very high levels of seismic excitation (locally measured as >2 g). Few loess slopes showed permanent local downslope deformation, and most of these showed only limited accumulated displacement. A series of innovative dynamic back pressured shear-box tests were undertaken on intact and remoulded loess samples collected from one of the recently active slopes replicating field conditions under different simplified horizontal seismic excitations. During each test, the strength reduction and excess pore water pressures generated were measured as the sample failed. Test results suggest that although dynamic liquefaction could have occurred, a key factor was likely to have been that the loess was largely unsaturated at the times of the large earthquake events. The failure of intact loess samples in the tests was complex and variable due to the highly variable geotechnical characteristics of the material. Some loess samples failed rapidly as a result of dynamic liquefaction as seismic excitation generated an increase in pore-water pressure, triggering rapid loss of strength and thus of shear resistance. Following initial failure, pore pressure dissipated with continued seismic excitation and the sample consolidated, resulting in partial shear-strength recovery. Once excess pore-water pressures had dissipated, deformation continued in a critical effective stress state with no further change in volume. Remoulded and weaker samples, however, did not liquefy, and instead immediately reduced in volume with an accompanying slower and more sustained increase in pore pressure as the sample consolidated. Thereafter excess pressures dissipated and deformation continued at a critical state. The complex behaviour explained why, despite exceptionally strong ground shaking, there was only limited displacement and lack of run-out: dynamic liquefaction was unlikely to occur in the freely draining slopes. Dynamic liquefaction however remained a plausible mechanism to explain loess failure in some of the low-angle toe slopes, where a permanent water table was present in the loess
- …