Uncertainty evaluation associated with versatile automated gauging influenced by process variations through design of experiments approach

Recent advances in versatile automated gauging have enabled accurate geometric tolerance assessment on the shop floor. This paper is concerned with the uncertainty evaluation associated with comparative coordinate measurement using the design of experiments (DOE) approach. It employs the Renishaw Equator which is a software-driven comparative gauge based on the traditional comparison of production parts to a reference master part. The fixturing requirement of each production part to the master part is approximately ±1 mm for a comparison process with an uncertainty of ±2 μm. Therefore, a number of experimental designs are applied with the main focus on the influence of part misalignment from rotation between master and measure coordinate frames on the comparator measurement uncertainty. Other factors considered include measurement mode mainly in scanning and touch-trigger probing (TTP) and alignment procedure used to establish the coordinate reference frame (CRF) with respect to the number of contact points used for each geometric feature measured. The measurement uncertainty analysis of the comparator technique used by the Equator gauge commences with a simple measurement task using a gauge block to evaluate the three-dimensional (3D) uncertainty of length comparative coordinate measurement influenced by an offset by tilt in one direction (two-dimensional angular misalignment). Then, a specific manufactured measurement object is employed so that the comparator measurement uncertainty can be assessed for numerous measurement tasks within a satisfactory range of the working volume of the versatile gauge. Furthermore, in the second case study, different types of part misalignment including both 2D and 3D angular misalignments are applied. The time required for managing the re-mastering process is also examined. A task specific uncertainty evaluation is completed using DOE. Also, investigating the effects of process variations that might be experienced by such a device in workshop environments. It is shown that the comparator measurement uncertainties obtained by all the experiments agree with system features under specified conditions. It is also demonstrated that when the specified conditions are exceeded, the comparator measurement uncertainty is associated with the measurement task, the measurement strategy used, the feature size, and the magnitude and direction of offset angles in relation to the reference axes of the machine. In particular, departures from the specified part fixturing requirement of Equator have a more significant effect on the uncertainty of length measurement in comparator mode and a less significant effect on the diameter measurement uncertainty for the specific Equator and test conditions

Charcoal chronology of the Amazon forest: A record of biodiversity preserved by ancient fires

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this record.he Amazon region holds a wide variety of ethnic groups and microclimates, enabling different interactions between humans and environment. To better understand the evolution of this region, ancient remains need to be analysed by all possible means. In this context, the study of natural and/or anthropogenic fires through the analysis of carbonized remains can give information on past climate, species diversity, and human intervention in forests and landscapes. In the present work, we undertook an anthracological analysis along with the 14 C dating of charcoal fragments using accelerator mass spectrometry (AMS). Charcoal samples from forest soils collected from seven different locations in the Amazon Basin were taxonomically classified and dated. Out of the 16 groups of charcoal fragments identified, five contained more than one taxonomic type, with the Fabaceae, Combretaceae and Sapotaceae families having the highest frequencies. 14 C charcoal dates span ∼6000 years (from 6876 to 365 yr BP) among different families, with the most significant variation observed for two fragments from the same sampling location (spanning 4000 14 C yr). Some sample sets resulted in up to five different families. These findings demonstrate the importance of the association between anthracological identification and radiocarbon dating in the reconstruction of paleo-forest composition and fire history.The authors thank the Brazilian agencies Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), and Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ). KDM thanks CNPq for fellowship 305079/2014–0. CL thanks FAPEAM/FAPESP (09/53369-6, led by Flávia Regina Capellotto Costa) for financial support and Thaise Emílio, José Luiz Purri da Veiga Pinto, Rosineide Machado and Francislaide da Silva Costa for help with charcoal collection. TRF, BSM, and BHM acknowledge financial support from NERC (NE/N011570/1), CAPES/CNPq Science without Borders (PVE 177/2012 and PVE 401279/2014-6), CNPq/PPBio (457602/2012-0), CNPq/PELD (403725/2012-7) and the University of Exeter - College of Life and Environmental Sciences

Patient-Specific Prosthetic Fingers by Remote Collaboration - A Case Study

The concealment of amputation through prosthesis usage can shield an amputee from social stigma and help improve the emotional healing process especially at the early stages of hand or finger loss. However, the traditional techniques in prosthesis fabrication defy this as the patients need numerous visits to the clinics for measurements, fitting and follow-ups. This paper presents a method for constructing a prosthetic finger through online collaboration with the designer. The main input from the amputee comes from the Computer Tomography (CT) data in the region of the affected and the non-affected fingers. These data are sent over the internet and the prosthesis is constructed using visualization, computer-aided design and manufacturing tools. The finished product is then shipped to the patient. A case study with a single patient having an amputated ring finger at the proximal interphalangeal joint shows that the proposed method has a potential to address the patient's psychosocial concerns and minimize the exposure of the finger loss to the public.Comment: Open Access articl

Catharanthus roseus flower extract has wound-healing activity in Sprague Dawley rats

BACKGROUND: Catharanthus roseus L (C. roseus) has been used to treat a wide assortment of diseases including diabetes. The objective of our study was to evaluate the antimicrobial and wound healing activity of the flower extract of Catharanthus in rats. METHODS: Wound healing activity was determined in rats, after administration (100 mg kg(-1 )day(-1)) of the ethanol extract of C. roseus flower, using excision, incision and dead space wounds models. The animals were divided into two groups of 6 each in all the models. In the excision model, group 1 animals were topically treated with carboxymethyl cellulose as placebo control and group 2 received topical application of the ethanol extract of C. roseus at a dose of 100 mg/kg body weight/day. In an incision and dead space model group 1 animals were given normal saline and group 2 received the extract orally at a dose of 100 mg kg(-1 )day(-1). Healing was assessed by the rate of wound contraction, period of epithelization, tensile strength (skin breaking strength), granulation tissue weight, and hydoxyproline content. Antimicrobial activity of the flower extract against four microorganisms was also assessed RESULTS: The extract of C. roseus significantly increased the wound breaking strength in the incision wound model compared with controls (P < 0.001). The extract-treated wounds were found to epithelialize faster, and the rate of wound contraction was significantly increased in comparison to control wounds (P < 0.001), Wet and dry granulation tissue weights, and hydroxyproline content in a dead space wound model increased significantly (p < 0.05). Pseudomonas aeruginosa and Staphylococcus aureus demonstrated sensitivity to C. roseus CONCLUSION: Increased wound contraction and tensile strength, augmented hydroxyproline content along with antimicrobial activity support the use of C. roseus in the topical management of wound healing

Genetic analysis of a major international collection of cultivated apple varieties reveals previously unknown historic heteroploid and inbred relationships

Domesticated apple (Malus x domestica Borkh.) is a major global crop and the genetic diversity held within the pool of cultivated varieties is important for the development of future cultivars. The aim of this study was to investigate the diversity held within the domesticated form, through the analysis of a major international germplasm collection of cultivated varieties, the UK National Fruit Collection, consisting of over 2,000 selections of named cultivars and seedling varieties. We utilised Diversity Array Technology (DArT) markers to assess the genetic diversity within the collection. Clustering attempts, using the software STRUCTURE revealed that the accessions formed a complex and historically admixed group for which clear clustering was challenging. Comparison of accessions using the Jaccard similarity coefficient allowed us to identify clonal and duplicate material as well as revealing pairs and groups that appeared more closely related than a standard parent-offspring or full-sibling relations. From further investigation, we were able to propose a number of new pedigrees, which revealed that some historically important cultivars were more closely related than previously documented and that some of them were partially inbred. We were also able to elucidate a number of parent-offspring relationships that had resulted in a number of important polyploid cultivars. This included reuniting polyploid cultivars that in some cases dated as far back as the 18th century, with diploid parents that potentially date back as far as the 13th century

In vitro assessment of the combined effect of eicosapentaenoic acid, green tea extract and curcumin C3 on protein loss in C2C12 myotubes

EPA has been clinically shown to reduce muscle wasting during cancer cachexia. This study investigates whether curcumin or green tea extract (GTE) enhances the ability of low doses of eicosapentaenoic acid (EPA) to reduce loss of muscle protein in an in vitro model. A low dose of EPA with minimal anti-cachectic activity was chosen to evaluate any potential synergistic effect with curcumin or GTE. Depression of protein synthesis and increase in degradation was determined in C2C12 myotubes in response to tumour necrosis factor-α (TNF-α) and proteolysis-inducing factor (PIF). EPA (50 μM) or curcumin (10 μg ml−1) alone had little effect on protein degradation caused by PIF but the combination produced complete inhibition, as did the combination with GTE (10 μg ml−1). In response to TNF-α (25 ng ml−1)-induced protein degradation, EPA had a small, but not significant effect on protein degradation; however, when curcumin and GTE were combined with EPA, the effect was enhanced. EPA completely attenuated the depression of protein synthesis caused by TNF-α, but not that caused by PIF. The combination of EPA with curcumin produced a significant increase in protein synthesis to both agents. GTE alone or in combination with EPA had no effect on the depression of protein synthesis by TNF-α, but did significantly increase protein synthesis in PIF-treated cells. Both TNF-α and PIF significantly reduced myotube diameter from 17 to 13 μm for TNF-α (23.5%) and 15 μm (11.8%) for PIF However the triple combination of EPA, curcumin and GTE returned diameters to values not significantly different from the control. These results suggest that either curcumin or GTE or the combination could enhance the anti-catabolic effect of EPA on lean body mass

On the potential economic costs of cutting carbon dioxide emissions in Portugal

The objective of this paper is to estimate the impact of reducing carbon dioxide emissions from fossil fuel combustion activities on economic activity in Portugal. We find that energy consumption has a significant impact on macroeconomic activity. In fact, a 1 ton of oil equivalent permanent reduction in aggregate energy consumption reduces output in the long term by €6,340. More importantly, and since carbon dioxide emissions are linearly related to the amounts of fuel consumed, our results allow us to estimate the costs of reductions in carbon dioxide emissions. We estimate that a uniform standard for reducing carbon dioxide emissions from fossil fuel combustion activities would lead to a marginal abatement cost of €95.74 per ton of carbon dioxide. This is a first rough estimate of the potential economic costs of policies designed to reduce carbon dioxide emissions. At this level one may conclude that uniform, across the board reductions in carbon emissions would have a clear negative effect on economic activity. Hence, at the aggregate level there is clear evidence for a trade-off between economic performance and a reduction in carbon emissions. This opens the door to the investigation of the scope for policy to minimize the costs of environmental policy and regulation.info:eu-repo/semantics/publishedVersio