Lipid Production From Waste Materials in Seawater-Based Medium by the Yeast Yarrowia lipolytica

The global limitation of fossil fuels impels scientists to search for new energy sources. A good alternative is biodiesel produced from crop plants. However, its production requires huge quantities of farmland, fertilizers and fresh water, which is in conflict with the human demand for water for consumption and land for food production. Thus, production of single cell oil (SCO) by oleaginous microorganisms remains the best solution for the coming years. Whereas most microorganisms require fresh water for proper cell metabolism, in this study we demonstrate that the unconventional yeast Yarrowia lipolytica is able to produce huge quantities of fatty acid in seawater-based medium. Here we shown that Y. lipolytica is able to produce fatty acids in medium based on seawater and crude glycerol as the main carbon source, which allows for low-cost production of SCO, is beneficial for industrial application and is ecologically friendly

Comparative Studies on the Susceptibility of (R)-2,3-Dipalmitoyloxypropylphosphonocholine (DPPnC) and Its Phospholipid Analogues to the Hydrolysis or Ethanolysis Catalyzed by Selected Lipases and Phospholipases

Susceptibility of soybean phosphatidylcholine, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and its phosphono analogue (R)-2,3-dipalmitoyloxypropylphosphonocholine (DPPnC) towards selected lipases and phospholipases was compared. The ethanolysis of substrates at sn-1 position was carried out by lipase from Mucor miehei (Lipozyme®) and lipase B from Candida antarctica (Novozym 435) in 95% ethanol at 30 °C, and the hydrolysis with LecitaseTM Ultra was carried out in hexane/water at 50 °C. Hydrolysis at sn-2 position was carried out in isooctane/Tris-HCl/AOT system at 40 °C using phospholipase A2 (PLA2) from porcine pancreas and PLA2 from bovine pancreas or 25 °C using PLA2 from bee venom. Hydrolysis in the polar part of the studied compounds was carried out at 30 °C in acetate buffer/ethyl acetate system using phospholipase D (PLD) from Streptococcus sp. and PLD from white cabbage or in Tris-HCl buffer/methylene chloride system at 35 °C using PLD from Streptomyces chromofuscus. The results showed that the presence of C-P bond between glycerol and phosphoric acid residue in DPPnC increases the rate of enzymatic hydrolysis or ethanolysis of ester bonds at the sn-1 and sn-2 position and decreases the rate of hydrolysis in the polar head of the molecule. The most significant changes in the reaction rates were observed for reaction with PLD from Streptococcus sp. and PLD from Streptomyces chromofuscus that hydrolyzed DPPnC approximately two times slower than DPPC and soybean PC. The lower susceptibility of DPPnC towards enzymatic hydrolysis by phospholipases D gives hope for the possibility of using DPPnC-like phosphonolipids as the carriers of bioactive molecules that, instead of choline, can be bounded with diacylpropylphosphonic acids (DPPnA)

Comparative Studies on the Susceptibility of (<i>R</i>)-2,3-Dipalmitoyloxypropylphosphonocholine (DPPnC) and Its Phospholipid Analogues to the Hydrolysis or Ethanolysis Catalyzed by Selected Lipases and Phospholipases

Susceptibility of soybean phosphatidylcholine, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and its phosphono analogue (R)-2,3-dipalmitoyloxypropylphosphonocholine (DPPnC) towards selected lipases and phospholipases was compared. The ethanolysis of substrates at sn-1 position was carried out by lipase from Mucor miehei (Lipozyme®) and lipase B from Candida antarctica (Novozym 435) in 95% ethanol at 30 °C, and the hydrolysis with LecitaseTM Ultra was carried out in hexane/water at 50 °C. Hydrolysis at sn-2 position was carried out in isooctane/Tris-HCl/AOT system at 40 °C using phospholipase A2 (PLA2) from porcine pancreas and PLA2 from bovine pancreas or 25 °C using PLA2 from bee venom. Hydrolysis in the polar part of the studied compounds was carried out at 30 °C in acetate buffer/ethyl acetate system using phospholipase D (PLD) from Streptococcus sp. and PLD from white cabbage or in Tris-HCl buffer/methylene chloride system at 35 °C using PLD from Streptomyces chromofuscus. The results showed that the presence of C-P bond between glycerol and phosphoric acid residue in DPPnC increases the rate of enzymatic hydrolysis or ethanolysis of ester bonds at the sn-1 and sn-2 position and decreases the rate of hydrolysis in the polar head of the molecule. The most significant changes in the reaction rates were observed for reaction with PLD from Streptococcus sp. and PLD from Streptomyces chromofuscus that hydrolyzed DPPnC approximately two times slower than DPPC and soybean PC. The lower susceptibility of DPPnC towards enzymatic hydrolysis by phospholipases D gives hope for the possibility of using DPPnC-like phosphonolipids as the carriers of bioactive molecules that, instead of choline, can be bounded with diacylpropylphosphonic acids (DPPnA)

Multi-Alkenylsilsesquioxanes as Comonomers and Active Species Modifiers of Metallocene Catalyst in Copolymerization with Ethylene

The copolymers of ethylene (E) with open-caged iso-butyl-substituted tri-alkenyl-silsesquioxanes (POSS-6-3 and POSS-10-3) and phenyl-substituted tetra-alkenyl-silsesquioxane (POSS-10-4) were synthesized by copolymerization over the ansa-metallocene catalyst. The influence of the kind of silsesquioxane and of the copolymerization conditions on the reaction performance and on the properties of the copolymers was studied. In the case of copolymerization of E/POSS-6-3, the positive comonomer effect was observed, which was associated with the influence of POSS-6-3 on transformation of the bimetallic ion pair to the active catalytic species. Functionality of silsesquioxanes and polymerization parameters affected the polyhedral oligomeric silsesquioxanes (POSS) contents in the copolymers which varied in the range of 1.33–7.43 wt %. Tri-alkenyl-silsesquioxanes were incorporated into the polymer chain as pendant groups while the tetra-alkenyl-silsesquioxane derivative could act as a cross-linking agent which was proved by the changes in the contents of unsaturated end groups, by the glass transition temperature values, and by the gel contents (up to 81.3% for E/POSS-10-4). Incorporation of multi-alkenyl-POSS into the polymer chain affected also the melting and crystallization behaviors

Mid-Infrared Spectroscopy Supports Identification of the Origin of Organic Matter in Soils

Spectroscopic methods combined with statistics have recently gathered substantial interest in pedological studies. Near-infrared (NIR) spectroscopy has been utilized, for example, for reconstructions of the history and transformations of Chernozems, although no similar research was conducted based on mid-infrared (MIR). In this paper, the relevance of MIR spectroscopy was tested in studies on the origin/affinity of organic matter from chernozemic soils. Samples collected from three vegetation classes (grasslands, forests and arable lands) were investigated using MIR spectroscopy in order to create a statistical model, which was applied on buried profiles of unknown origin. The results showed a clear disjunction of vegetation classes. Samples of buried soil were placed in the space between all classes, indicating the relation to variable vegetation. Therefore, arable lands should not be omitted in paleoecological reconstructions, because we cannot exclude the cultivation of fertile soils before their burial. It was concluded that MIR methods may have similar applicability to NIR spectroscopy. Additionally, MIR spectra may also be discriminated according to the recognized soil type, which allows for direct reconstructions of the transformation trends in buried profiles

Slick Synthetic Approach to Various Fluoroalkyl Silsesquioxanes&mdash;Assessment of their Dielectric Properties

We present a smart and efficient methodology for the synthesis of a variety of fluorinated silsesquioxanes (SQs) with diverse Si-O-Si core architecture. The protocol is based on an easy-to-handle and selective hydrosilylation reaction. An investigation on the placement of the reactive Si-HC=CH2 vs. Si-H in the silsesquioxane, as well as silane vs. olefin structure, respectively, on the progress and selectivity of the hydrosilylation process, was studied. Two alternative synthetic pathways for obtaining a variety of fluorine-functionalized silsesquioxanes were developed. As a result, a series of mono- and octa- T8 SQs, tri- &lsquo;open-cage&rsquo; T7 SQs, in addition to di- and tetrafunctionalized double-decker silsesquioxane (DDSQ) derivatives, were obtained selectively with high yields. All products were characterized by spectroscopic (NMR, FTIR) techniques. Selected samples were subjected to the measurements revealing their dielectric permittivity in a wide range of temperatures (from &minus;100 &deg;C to 100 &deg;C) and electric field frequencies (100&ndash;106 Hz)