Hybrid magnetic graphitic nanocomposites for catalytic wet peroxide oxidation applications

Fe3O4, with a lattice parameter a = 8.357 A and average particle size of 12.5 +/- 3.6 nm, was successfully encapsulated within a graphitic structure by a hierarchical co-assembly approach, followed by thermal annealing. The resulting material was denoted as MGNC-magnetic graphitic nanocomposite. MGNC possesses average core size of 109 +/- 35 nm (mainly composed by agglomerates of magnetic nanoparticles), stability up to 400 degrees C under oxidizing atmosphere, a micro-mesoporous structure with a fairly developed specific surface area (S-BET = 330 m(2) g(-1)) and neutral character (pH(PZC) = 7.1). Catalytic wet peroxide oxidation (CWPO) experiments performed with a 4-nitrophenol (4-NP)/Fe3O4 mass ratio fixed at 36.6, allowed to achieve high efficiency of catalyst usage throughout the wide range of 4-NP concentration considered (200 mg L-1-5 g L-1). The inclusion of Fe3O4 nanoparticles in a graphitic structure during the synthesis of MGNC was found to (i) enhance the catalytic activity in CWPO when compared to Fe3O4, due to increased adsorptive interactions between the surface of the catalyst and the pollutant molecules, while (ii) strongly limiting the leaching of Fe species from Fe3O4 to the treated water, due to the confinement effect caused by the carbon shell. As a result of these effects, unprecedented pollutant mass removals were obtained ranging from 5000 mg(-1) h(-1), when the CWPO process is performed with [4-NP](o) = 200 mg L-1 at pH = 3, to 1250 mgg(-1) h(-1), when [4-NP](o) = 5 g L-1. High efficiency of H2O2 consumption is obtained when MGNC is applied in the CWPO of 4 -NP solutions at pH = 3, with TOC removals per unit of H2O2 decomposed (n(H2O2)) in the range 64-100%. In addition, the MGNC catalyst is also active at pH = 6; in this case a pollutant mass removal of 2090 mg g(-1) h(-1) was obtained. Although MGNC partially deactivates through successive reusability cycles, the pollutant mass removal obtained at the end of the fourth cycle is still very high when 200 mg L-1 4-NP solutions are considered (4808 mg g(-1) h(-1), representing only a ca. 4% decrease when compared to the first cycle). A higher deactivation of the MGNC catalyst is observed when 5 gL(-1) 4-NP solutions are employed. Nevertheless, the pollutant mass removal obtained at the end of the third cycle is still high (551 mgg(-1) h(-1))

Loop and surface operators in N=2 gauge theory and Liouville modular geometry

Recently, a duality between Liouville theory and four dimensional N=2 gauge theory has been uncovered by some of the authors. We consider the role of extended objects in gauge theory, surface operators and line operators, under this correspondence. We map such objects to specific operators in Liouville theory. We employ this connection to compute the expectation value of general supersymmetric 't Hooft-Wilson line operators in a variety of N=2 gauge theories.Comment: 60 pages, 11 figures; v3: further minor corrections, published versio

Nut production in Bertholletia excelsa across a logged forest mosaic: implications for multiple forest use

Although many examples of multiple-use forest management may be found in tropical smallholder systems, few studies provide empirical support for the integration of selective timber harvesting with non-timber forest product (NTFP) extraction. Brazil nut (Bertholletia excelsa, Lecythidaceae) is one of the world’s most economically-important NTFP species extracted almost entirely from natural forests across the Amazon Basin. An obligate out-crosser, Brazil nut flowers are pollinated by large-bodied bees, a process resulting in a hard round fruit that takes up to 14 months to mature. As many smallholders turn to the financial security provided by timber, Brazil nut fruits are increasingly being harvested in logged forests. We tested the influence of tree and stand-level covariates (distance to nearest cut stump and local logging intensity) on total nut production at the individual tree level in five recently logged Brazil nut concessions covering about 4000 ha of forest in Madre de Dios, Peru. Our field team accompanied Brazil nut harvesters during the traditional harvest period (January-April 2012 and January-April 2013) in order to collect data on fruit production. Three hundred and ninety-nine (approximately 80%) of the 499 trees included in this study were at least 100 m from the nearest cut stump, suggesting that concessionaires avoid logging near adult Brazil nut trees. Yet even for those trees on the edge of logging gaps, distance to nearest cut stump and local logging intensity did not have a statistically significant influence on Brazil nut production at the applied logging intensities (typically 1–2 timber trees removed per ha). In one concession where at least 4 trees ha-1 were removed, however, the logging intensity covariate resulted in a marginally significant (0.09) P value, highlighting a potential risk for a drop in nut production at higher intensities. While we do not suggest that logging activities should be completely avoided in Brazil nut rich forests, when a buffer zone cannot be observed, low logging intensities should be implemented. The sustainability of this integrated management system will ultimately depend on a complex series of socioeconomic and ecological interactions. Yet we submit that our study provides an important initial step in understanding the compatibility of timber harvesting with a high value NTFP, potentially allowing for diversification of forest use strategies in Amazonian Perù

Construct and face validity of SINERGIA laparoscopic virtual reality simulator

Purpose Laparoscopic techniques have nowadays become a gold standard in many surgical procedures, but they imply a more difficult learning skills process. Simulators have a fundamental role in the formative stage of new surgeons. This paper presents the construct and face validity of SINERGIA laparoscopic virtual reality simulator in order to decide whether it can be considered as an assessment tool. Methods Twenty people participated in this study, 14 were novices and 6 were experts. Five tasks of SINERGIA were included in the study: coordination, navigation, navigation and touch, precise grasping and coordinate traction. For each one of these tasks, a certain number of metrics are automatically recorded. All subjects accomplished each task only once and filled in two questionnaires. A statistical analysis was made and results from both groups were compared with the Mann–Whitney U-test, considering significant differences when P ≤ 0.05. Internal consistency of the system has been analyzed with the Cronbach’s alpha test. Results Novices and experts positively rated SINERGIA characteristics. At least one of the evaluated metrics of each exercise presented significant differences between both groups. Nevertheless, all metrics under study gave a better punctuation to the executions accomplished by experts (lower time, higher efficiency, fewer errors. . .) than to those made by novices. Conclusion SINERGIA laparoscopic virtual reality simulator is able to discriminate subjects according to their level of experience in laparoscopic surgery; therefore, it can be used within a training program as an assessment too

Validity of new child-specific thoracic gas volume prediction equations for air-displacement plethysmography

BACKGROUND: To determine the validity of the recently developed child-specific thoracic gas volume (TGV) prediction equations for use in air-displacement plethysmography (ADP) in diverse pediatric populations. METHODS: Three distinct populations were studied: European American and African American children living in Birmingham, Alabama and European children living in Lisbon, Portugal. Each child completed a standard ADP testing protocol, including a measured TGV according to the manufactures software criteria. Measured TGV was compared to the predicted TGV from current adult-based ADP proprietary equations and to the recently developed child-specific TGV equations of Fields et al. Similarly, percent body fat, derived using the TGV prediction equations, was compared to percent body fat derived using measured TGV. RESULTS: Predicted TGV from adult-based equations was significantly different from measured TGV in girls from each of the three ethnic groups (P < 0.05), however child-specific TGV estimates did not significantly differ from measured TGV in any of the ethnic or gender groups. Percent body fat estimates using adult-derived and child-specific TGV estimates did not differ significantly from percent body fat measures using measured TGV in any of the groups. CONCLUSION: The child-specific TGV equations developed by Fields et al. provided a modest improvement over the adult-based TGV equations in an ethnically diverse group of children

Utilizing international networks for accelerating research and learning in transformational sustainability science

A promising approach for addressing sustainability problems is to recognize the unique conditions of a particular place, such as problem features and solution capabilities, and adopt and adapt solutions developed at other places around the world. Therefore, research and teaching in international networks becomes critical, as it allows for accelerating learning by sharing problem understandings, successful solutions, and important contextual considerations. This article identifies eight distinct types of research and teaching collaborations in international networks that can support such accelerated learning. The four research types are, with increasing intensity of collaboration: (1) solution adoption; (2) solution consultation; (3) joint research on different problems; and (4) joint research on similar problems. The four teaching types are, with increasing intensity of collaboration: (1) adopted course; (2) course with visiting faculty; (3) joint course with traveling faculty; and (4) joint course with traveling students. The typology is illustrated by extending existing research and teaching projects on urban sustainability in the International Network of Programs in Sustainability, with partner universities from Europe, North America, Asia, and Africa. The article concludes with challenges and strategies for extending individual projects into collaborations in international networks.Postprint (author's final draft

Separability of neural responses to standardised mechanical stimulation of limbs

Abstract Considerable scientific and technological efforts are currently being made towards the development of neural prostheses. Understanding how the peripheral nervous system responds to electro-mechanical stimulation of the limb, will help to inform the design of prostheses that can restore function or accelerate recovery from injury to the sensory motor system. However, due to differences in experimental protocols, it is difficult, if not impossible, to make meaningful comparisons between different peripheral nerve interfaces. Therefore, we developed a low-cost electronic system to standardise the mechanical stimulation of a rat’s hindpaw. Three types of mechanical stimulations, namely, proprioception, touch and nociception were delivered to the limb and the electroneurogram signals were recorded simultaneously from the sciatic nerve with a 16-contact cuff electrode. For the first time, results indicate separability of neural responses according to stimulus type as well as intensity. Statistical analysis reveal that cuff contacts placed circumferentially, rather than longitudinally, are more likely to lead to higher classification rates. This flexible setup may be readily adapted for systematic comparison of various electrodes and mechanical stimuli in rodents. Hence, we have made its electro-mechanical design and computer programme available onlin

Do Native Parasitic Plants Cause More Damage to Exotic Invasive Hosts Than Native Non-Invasive Hosts? An Implication for Biocontrol

Field studies have shown that native, parasitic plants grow vigorously on invasive plants and can cause more damage to invasive plants than native plants. However, no empirical test has been conducted and the mechanism is still unknown. We conducted a completely randomized greenhouse experiment using 3 congeneric pairs of exotic, invasive and native, non-invasive herbaceous plant species to quantify the damage caused by parasitic plants to hosts and its correlation with the hosts' growth rate and resource use efficiency. The biomass of the parasitic plants on exotic, invasive hosts was significantly higher than on congeneric native, non-invasive hosts. Parasites caused more damage to exotic, invasive hosts than to congeneric, native, non-invasive hosts. The damage caused by parasites to hosts was significantly positively correlated with the biomass of parasitic plants. The damage of parasites to hosts was significantly positively correlated with the relative growth rate and the resource use efficiency of its host plants. It may be the mechanism by which parasitic plants grow more vigorously on invasive hosts and cause more damage to exotic, invasive hosts than to native, non-invasive hosts. These results suggest a potential biological control effect of native, parasitic plants on invasive species by reducing the dominance of invasive species in the invaded community

A polymorphic microsatellite from the Squalius alburnoides complex (Osteichthyes, Cyprinidae) cloned by serendipity can be useful in genetic analysis of polyploids

A new microsatellite locus (SAS1) for Squalius alburnoides was obtained through cloning by serendipity. The possible usefulness of this new species-specific microsatellite in genetic studies of this hybrid-species complex, was explored. The polymorphism exhibited by SAS1 microsatellite is an important addition to the set of microsatellites previously used in genetic studies in S. alburnoides complex, that mostly relied in markers described for other species. Moreover, the SAS1 microsatellite could be used to identify the parental genomes of the complex, complementing other methods recently described for the same purpose.