Etched distributed Bragg reflectors as three-dimensional photonic crystals: photonic bands and density of states

The photonic band dispersion and density of states (DOS) are calculated for the three-dimensional (3D) hexagonal structure corresponding to a distributed Bragg reflector patterned with a 2D triangular lattice of circular holes. Results for the Si/SiO$_2$ and GaAs/AlGaAs systems determine the optimal parameters for which a gap in the 2D plane occurs and overlaps the 1D gap of the multilayer. The DOS is considerably reduced in correspondence with the overlap of 2D and 1D gaps. Also, the local density of states (i.e., the DOS weighted with the squared electric field at a given point) has strong variations depending on the position. Both results imply substantial changes of spontaneous emission rates and patterns for a local emitter embedded in the structure and make this system attractive for the fabrication of a 3D photonic crystal with controlled radiative properties.Comment: 8 pages, 5 figures; to appear in Phys. Rev.

The Sigma 13 (10-14) twin in alpha-Al2O3: A model for a general grain boundary

The atomistic structure and energetics of the Sigma 13 (10-14)[1-210] symmetrical tilt grain boundary in alpha-Al2O3 are studied by first-principles calculations based on the local-density-functional theory with a mixed-basis pseudopotential method. Three configurations, stable with respect to intergranular cleavage, are identified: one Al-terminated glide-mirror twin boundary, and two O-terminated twin boundaries, with glide-mirror and two-fold screw-rotation symmetries, respectively. Their relative energetics as a function of axial grain separation are described, and the local electronic structure and bonding are analysed. The Al-terminated variant is predicted to be the most stable one, confirming previous empirical calculations, but in contrast with high-resolution transmission electron microscopy observations on high-purity diffusion-bonded bicrystals, which resulted in an O-terminated structure. An explanation of this discrepancy is proposed, based on the different relative energetics of the internal interfaces with respect to the free surfaces

Thermal Infrared Imaging Experiments of C-Type Asteroid 162173 Ryugu on Hayabusa2

The thermal infrared imager TIR onboard Hayabusa2 has been developed to investigate thermo-physical properties of C-type, near-Earth asteroid 162173 Ryugu. TIR is one of the remote science instruments on Hayabusa2 designed to understand the nature of a volatile-rich solar system small body, but it also has significant mission objectives to provide information on surface physical properties and conditions for sampling site selection as well as the assessment of safe landing operations. TIR is based on a two-dimensional uncooled micro-bolometer array inherited from the Longwave Infrared Camera LIR on Akatsuki (Fukuhara et al., 2011). TIR takes images of thermal infrared emission in 8 to 12 μm with a field of view of 16×12∘ and a spatial resolution of 0.05∘ per pixel. TIR covers the temperature range from 150 to 460 K, including the well calibrated range from 230 to 420 K. Temperature accuracy is within 2 K or better for summed images, and the relative accuracy or noise equivalent temperature difference (NETD) at each of pixels is 0.4 K or lower for the well-calibrated temperature range. TIR takes a couple of images with shutter open and closed, the corresponding dark frame, and provides a true thermal image by dark frame subtraction. Data processing involves summation of multiple images, image processing including the StarPixel compression (Hihara et al., 2014), and transfer to the data recorder in the spacecraft digital electronics (DE). We report the scientific and mission objectives of TIR, the requirements and constraints for the instrument specifications, the designed instrumentation and the pre-flight and in-flight performances of TIR, as well as its observation plan during the Hayabusa2 mission

Denosumab compared with risedronate in postmenopausal women suboptimally adherent to alendronate therapy: Efficacy and safety results from a randomized open-label study

Denosumab has been shown to reduce new vertebral, nonvertebral, and hip fractures in postmenopausal women with osteoporosis. In subjects who were treatment-naive or previously treated with alendronate, denosumab was associated with greater gains in bone mineral density (BMD) and decreases in bone turnover markers when compared with alendronate-treated subjects. This trial was designed to compare the efficacy and safety of denosumab with risedronate over 12 months in postmenopausal women who transitioned from daily or weekly alendronate treatment and were considered to be suboptimally adherent to therapy. In this randomized, open-label study, postmenopausal women aged ≥55 years received denosumab 60 mg subcutaneously every 6 months or risedronate 150 mg orally every month for 12 months. Endpoints included percentage change from baseline in total hip BMD (primary endpoint), femoral neck, and lumbar spine BMD at month 12, and percentage change from baseline in sCTX-1 at months 1 and 6. Safety was also assessed. A total of 870 subjects were randomized (435, risedronate; 435, denosumab) who had a mean (SD) age of 67.7 (6.9) years, mean (SD) BMD T-scores of -1.6 (0.9), -1.9 (0.7), and -2.2 (1.2) at the total hip, femoral neck, and lumbar spine, respectively, and median sCTX-1 of 0.3 ng/mL at baseline. At month 12, denosumab significantly increased BMD compared with risedronate at the total hip (2.0% vs 0.5%), femoral neck (1.4% vs 0%), and lumbar spine (3.4% vs 1.1%; p<0.0001 at all sites). Denosumab significantly decreased sCTX-1 compared with risedronate at month 1 (median change from baseline of -78% vs -17%; p<0.0001) and month 6 (-61% vs -23%; p<0.0001). Overall and serious adverse events were similar between groups. In postmenopausal women who were suboptimally adherent to alendronate therapy, transitioning to denosumab was well tolerated and more effective than risedronate in increasing BMD and reducing bone turnover

Approximate k-state solutions to the Dirac-Yukawa problem based on the spin and pseudospin symmetry

Using an approximation scheme to deal with the centrifugal (pseudo-centrifugal) term, we solve the Dirac equation with the screened Coulomb (Yukawa) potential for any arbitrary spin-orbit quantum number {\kappa}. Based on the spin and pseudospin symmetry, analytic bound state energy spectrum formulas and their corresponding upper- and lower-spinor components of two Dirac particles are obtained using a shortcut of the Nikiforov-Uvarov method. We find a wide range of permissible values for the spin symmetry constant C_{s} from the valence energy spectrum of particle and also for pseudospin symmetry constant C_{ps} from the hole energy spectrum of antiparticle. Further, we show that the present potential interaction becomes less (more) attractive for a long (short) range screening parameter {\alpha}. To remove the degeneracies in energy levels we consider the spin and pseudospin solution of Dirac equation for Yukawa potential plus a centrifugal-like term. A few special cases such as the exact spin (pseudospin) symmetry Dirac-Yukawa, the Yukawa plus centrifugal-like potentials, the limit when {\alpha} becomes zero (Coulomb potential field) and the non-relativistic limit of our solution are studied. The nonrelativistic solutions are compared with those obtained by other methods.Comment: 21 pages, 6 figure

Metallo-dielectric diamond and zinc-blende photonic crystals

It is shown that small inclusions of a low absorbing metal can have a dramatic effect on the photonic band structure. In the case of diamond and zinc-blende photonic crystals, several complete photonic band gaps (CPBG's) can open in the spectrum, between the 2nd-3rd, 5th-6th, and 8th-9th bands. Unlike in the purely dielectric case, in the presence of small inclusions of a low absorbing metal the largest CPBG for a moderate dielectric constant (epsilon<=10) turns out to be the 2nd-3rd CPBG. The 2nd-3rd CPBG is the most important CPBG, because it is the most stable against disorder. For a diamond and zinc-blende structure of nonoverlapping dielectric and metallo-dielectric spheres, a CPBG begins to decrease with an increasing dielectric contrast roughly at the point where another CPBG starts to open--a kind of gap competition. A CPBG can even shrink to zero when the dielectric contrast increases further. Metal inclusions have the biggest effect for the dielectric constant 2<=epsilon<=12, which is a typical dielectric constant at near infrared and in the visible for many materials, including semiconductors and polymers. It is shown that one can create a sizeable and robust 2nd-3rd CPBG at near infrared and visible wavelengths even for a photonic crystal which is composed of more than 97% low refractive index materials (n<=1.45, i.e., that of silica glass or a polymer). These findings open the door for any semiconductor and polymer material to be used as genuine building blocks for the creation of photonic crystals with a CPBG and significantly increase the possibilities for experimentalists to realize a sizeable and robust CPBG in the near infrared and in the visible. One possibility is a construction method using optical tweezers, which is analyzed here.Comment: 25 pp, 23 figs, RevTex, to appear in Phys Rev B. For more information look at http://www.amolf.nl/research/photonic_materials_theory/moroz/moroz.htm

Seven fatalities associated with ethylphenidate

Ethylphenidate is a stimulant novel psychoactive substance that is an analogue of the prescription drug methylphenidate (Ritalin®). Methylphenidate is used commonly for the treatment of attention deficit hyperactivity disorder. Due to its stimulant effects ethylphenidate is being abused. There is a single case report of a death associated with ethylphenidate in Germany, and a case series of 19 deaths in the East of Scotland, but otherwise, the contribution of ethylphenidate to death is poorly documented. We report the analytical results of 7 cases (between February 2013 and January 2015) in which ethylphenidate was detected and quantitated with a validated liquid chromatography tandem mass spectrometry method (LC-MS/MS). The individuals (all male) ranged in age from 23 to 49 years (median 25 years). The concentration of ethylphenidate in the cases ranged from 0.026mg/L to 2.18mg/L in unpreserved post-mortem femoral blood. Only one case had ethylphenidate present as a sole drug. All other cases had at least 2 other drug classes present (benzodiazepines, heroin, methadone antipsychotics, other new psychoactive compounds). Ethylphenidate toxicity was the sole contribution to the cause of death in one case. Hanging was the cause of death in 2 cases, with the other 4 cases being reported as having occurred due to mixed drug toxicity. These data will further help with the interpretation of post-mortem ethylphenidate levels

Noncommutative quantum mechanics and Bohm's ontological interpretation

We carry out an investigation into the possibility of developing a Bohmian interpretation based on the continuous motion of point particles for noncommutative quantum mechanics. The conditions for such an interpretation to be consistent are determined, and the implications of its adoption for noncommutativity are discussed. A Bohmian analysis of the noncommutative harmonic oscillator is carried out in detail. By studying the particle motion in the oscillator orbits, we show that small-scale physics can have influence at large scales, something similar to the IR-UV mixing