Velocity-selective resonance dips in the probe absorption spectra of Rb D2 transitions induced by a pump laser

We report experimental observation of velocity-selective resonances in the Doppler-broadened probe absorption spectra of 85Rb and 87Rb D2 transitions in the presence of a strong copropagating pump laser locked to a frequency within the Doppler profile of the transition. The set of three dips having the separation of allowed hyperfine transitions can be moved along the Doppler profile by tuning the pump laser frequency indicating a resonance between the pump laser frequency and the velocity shifted probe laser frequency.Comment: 7 pages, 4 figure

Meissner state in finite superconducting cylinders with uniform applied magnetic field

We study the magnetic response of superconductors in the presence of low values of a uniform applied magnetic field. We report measurements of DC magnetization and AC magnetic susceptibility performed on niobium cylinders of different length-to-radius ratios, which show a dramatic enhance of the initial magnetization for thin samples, due to the demagnetizing effects. The experimental results are analyzed by applying a model that calculates the magnetic response of the superconductor, taking into account the effects of the demagnetizing fields. We use the results of magnetization and current and field distributions of perfectly diamagnetic cylinders to discuss the physics of the demagnetizing effects in the Meissner state of type-II superconductors.Comment: Accepted to be published in Phys. Rev. B; 15 pages, 7 ps figure

Lattice-switch Monte Carlo

We present a Monte Carlo method for the direct evaluation of the difference between the free energies of two crystal structures. The method is built on a lattice-switch transformation that maps a configuration of one structure onto a candidate configuration of the other by `switching' one set of lattice vectors for the other, while keeping the displacements with respect to the lattice sites constant. The sampling of the displacement configurations is biased, multicanonically, to favor paths leading to `gateway' arrangements for which the Monte Carlo switch to the candidate configuration will be accepted. The configurations of both structures can then be efficiently sampled in a single process, and the difference between their free energies evaluated from their measured probabilities. We explore and exploit the method in the context of extensive studies of systems of hard spheres. We show that the efficiency of the method is controlled by the extent to which the switch conserves correlated microstructure. We also show how, microscopically, the procedure works: the system finds gateway arrangements which fulfill the sampling bias intelligently. We establish, with high precision, the differences between the free energies of the two close packed structures (fcc and hcp) in both the constant density and the constant pressure ensembles.Comment: 34 pages, 9 figures, RevTeX. To appear in Phys. Rev.

History effects and pinning regimes in solid vortex matter

We propose a phenomenological model that accounts for the history effects observed in ac susceptibility measurements in YBa2Cu3O7 single crystals [Phys. Rev. Lett. 84, 4200 (2000) and Phys. Rev. Lett. 86, 504 (2001)]. Central to the model is the assumption that the penetrating ac magnetic field modifies the vortex lattice mobility, trapping different robust dynamical states in different regions of the sample. We discuss in detail on the response of the superconductor to an ac magnetic field when the vortex lattice mobility is not uniform inside the sample. We begin with an analytical description for a simple geometry (slab) and then we perform numerical calculations for a strip in a transverse magnetic field which include relaxation effects. In calculations, the vortex system is assumed to coexist in different pinning regimes. The vortex behavior in the regions where the induced current density j has been always below a given threshold (j_c^>) is described by an elastic Campbell-like regime (or a critical state regime with local high critical current density, j_c^>). When the VS is shaken by symmetrical (e.g. sinusoidal) ac fields, the critical current density is modified to j_c^) at regions where vortices have been forced to oscillate by a current density larger than j_c^>. Experimentally, an initial state with high critical current density (j_c^>) can be obtained by zero field cooling, field cooling (with no applied ac field) or by shaking the vortex lattice with an asymmetrical (e.g. sawtooth) field. We compare our calculations with experimental ac susceptibility results in YBa2Cu3O7 single crystals.Comment: 11 pages, 7 figures. To be published in PR

Effects of Rapid Heating on Solutionizing Characteristics of Al-Si-Mg Alloys Using a Fluidized Bed

Effects of rapid heat transfer using a fluidized bed on the heat-treating response of Al-Si-Mg alloys (both unmodified and Sr modified) were investigated. The heating rate in the fluidized bed is greater than in conventional air convective furnaces. Particle size analyses of eutectic Si showed that the high heating rate during fluidized bed solution heat treatment causes faster fragmentation and spherodization of Si particles compared to conventional air convective furnaces. The mechanism of Si fragmentation through fluidized bed processing is through both brittle fracture and neck formation and its propagation. In contrast to this, the mechanism of Si fragmentation using a conventional air convective furnace is through neck formation and propagation. The Sr-modified D357 alloy showed a faster spherodizing rate than the unmodified alloy. Thermal analyses showed an exothermic reaction during solution heat treatment using a fluidized bed due to recrystallization, and coarsening of eutectic Al grains. Whereas the alloy solutionized using a conventional air convective furnace showed two exothermic reactions, one due to annihilation of point defects and the other due to recrystallization, and coarsening of the eutectic grains in the aluminum matrix. The recrystallization temperature of the alloy solutionized in the fluidized bed is lower than those in the conventional air convective furnace. Both tensile strength and elongation of fluidized bed solutionized alloys are greater than those solutionized using the air convective furnace. The optimum heat-treatment time for T4 temper using a fluidized bed for unmodified and Sr-modified alloy was reduced to 60 and 30 minutes, respectively

Production and Decay of D_1(2420)^0 and D_2^*(2460)^0

We have investigated $D^{+}\pi^{-}$ and $D^{*+}\pi^{-}$ final states and observed the two established $L=1$ charmed mesons, the $D_1(2420)^0$ with mass $2421^{+1+2}_{-2-2}$ MeV/c$^{2}$ and width $20^{+6+3}_{-5-3}$ MeV/c$^{2}$ and the $D_2^*(2460)^0$ with mass $2465 \pm 3 \pm 3$ MeV/c$^{2}$ and width $28^{+8+6}_{-7-6}$ MeV/c$^{2}$. Properties of these final states, including their decay angular distributions and spin-parity assignments, have been studied. We identify these two mesons as the $j_{light}=3/2$ doublet predicted by HQET. We also obtain constraints on {\footnotesize $\Gamma_S/(\Gamma_S + \Gamma_D)$} as a function of the cosine of the relative phase of the two amplitudes in the $D_1(2420)^0$ decay.Comment: 15 pages in REVTEX format. hardcopies with figures can be obtained by sending mail to: [email protected]

Measurement of the branching fraction for Υ(1S)→τ+τ−\Upsilon (1S) \to \tau^+ \tau^-

We have studied the leptonic decay of the $\Upsilon (1S)$ resonance into tau pairs using the CLEO II detector. A clean sample of tau pair events is identified via events containing two charged particles where exactly one of the particles is an identified electron. We find $B(\Upsilon(1S) \to \tau^+ \tau^-) = (2.61~\pm~0.12~{+0.09\atop{-0.13}})$. The result is consistent with expectations from lepton universality.Comment: 9 pages, RevTeX, two Postscript figures available upon request, CLNS 94/1297, CLEO 94-20 (submitted to Physics Letters B

Measurement of the Decay Asymmetry Parameters in Λc+→Λπ+\Lambda_c^+ \to \Lambda\pi^+ and Λc+→Σ+π0\Lambda_c^+ \to \Sigma^+\pi^0

We have measured the weak decay asymmetry parameters (\aLC ) for two \LC\ decay modes. Our measurements are \aLC = -0.94^{+0.21+0.12}_{-0.06-0.06} for the decay mode $\Lambda_c^+ \to \Lambda\pi^+$ and \aLC = -0.45\pm 0.31 \pm 0.06 for the decay mode $\Lambda_c \to \Sigma^+\pi^0$. By combining these measurements with the previously measured decay rates, we have extracted the parity-violating and parity-conserving amplitudes. These amplitudes are used to test models of nonleptonic charmed baryon decay.Comment: 11 pages including the figures. Uses REVTEX and psfig macros. Figures as uuencoded postscript. Also available as http://w4.lns.cornell.edu/public/CLNS/1995/CLNS95-1319.p

Search for Higgs bosons decaying to tautau pairs in ppbar collisions at sqrt(s) = 1.96 TeV

We present a search for the production of neutral Higgs bosons decaying into tautau pairs in ppbar collisions at a center-of-mass energy of 1.96 TeV. The data, corresponding to an integrated luminosity of 5.4 fb-1, were collected by the D0 experiment at the Fermilab Tevatron Collider. We set upper limits at the 95% C.L. on the product of production cross section and branching ratio for a scalar resonance decaying into tautau pairs, and we then interpret these limits as limits on the production of Higgs bosons in the minimal supersymmetric standard model (MSSM) and as constraints in the MSSM parameter space.Comment: 7 pages, 5 figures, submitted to PL

Measurement of the photon+b+b-jet production differential cross section in ppˉp\bar{p} collisions at \sqrt{s}=1.96~\TeV

We present measurements of the differential cross section dsigma/dpT_gamma for the inclusive production of a photon in association with a b-quark jet for photons with rapidities |y_gamma|< 1.0 and 30<pT_gamma <300 GeV, as well as for photons with 1.5<|y_gamma|< 2.5 and 30< pT_gamma <200 GeV, where pT_gamma is the photon transverse momentum. The b-quark jets are required to have pT>15 GeV and rapidity |y_jet| < 1.5. The results are based on data corresponding to an integrated luminosity of 8.7 fb^-1, recorded with the D0 detector at the Fermilab Tevatron $p\bar{p}$ Collider at sqrt(s)=1.96 TeV. The measured cross sections are compared with next-to-leading order perturbative QCD calculations using different sets of parton distribution functions as well as to predictions based on the kT-factorization QCD approach, and those from the Sherpa and Pythia Monte Carlo event generators.Comment: 10 pages, 9 figures, submitted to Phys. Lett.