3,614 research outputs found
Flavour-Independent Searches for Neutral Higgs Bosons decaying into hadrons with the DELPHI Detector at LEP2
A double-sided, shield-less stave prototype for the ATLAS upgrade strip tracker for the high luminosity LHC
A detailed description of the integration structures for the barrel region of the silicon strips tracker of the ATLAS Phase-II upgrade for the upgrade of the Large Hadron Collider, the so-called High Luminosity LHC (HL-LHC), is presented. This paper focuses on one of the latest demonstrator prototypes recently assembled, with numerous unique features. It consists of a shortened, shield-less, and double sided stave, with two candidate power distributions implemented. Thermal and electrical performances of the prototype are presented, as well as a description of the assembly procedures and tools
A double-sided silicon micro-strip super-module for the ATLAS inner detector upgrade in the high-luminosity LHC
The ATLAS experiment is a general purpose detector aiming to fully exploit the discovery potential of the Large Hadron Collider (LHC) at CERN. It is foreseen that after several years of successful data-taking, the LHC physics programme will be extended in the so-called High-Luminosity LHC, where the instantaneous luminosity will be increased up to 5 Ă 1034 cmâ2 sâ1. For ATLAS, an upgrade scenario will imply the complete replacement of its internal tracker, as the existing detector will not provide the required performance due to the cumulated radiation damage and the increase in the detector occupancy. The current baseline layout for the new ATLAS tracker is an all-silicon-based detector, with pixel sensors in the inner layers and silicon micro-strip detectors at intermediate and outer radii. The super-module is an integration concept proposed for the strip region of the future ATLAS tracker, where double-sided stereo silicon micro-strip modules are assembled into a low-mass local support structure. An electrical super-module prototype for eight double-sided strip modules has been constructed. The aim is to exercise the multi-module readout chain and to investigate the noise performance of such a system. In this paper, the main components of the current super-module prototype are described and its electrical performance is presented in detail
Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC
While the tracking detectors of the ATLAS and CMS experiments have shown
excellent performance in Run 1 of LHC data taking, and are expected to continue
to do so during LHC operation at design luminosity, both experiments will have
to exchange their tracking systems when the LHC is upgraded to the
high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems
need to operate in an environment in which both the hit densities and the
radiation damage will be about an order of magnitude higher than today. In
addition, the new trackers need to contribute to the first level trigger in
order to maintain a high data-taking efficiency for the interesting processes.
Novel detector technologies have to be developed to meet these very challenging
goals. The German groups active in the upgrades of the ATLAS and CMS tracking
systems have formed a collaborative "Project on Enabling Technologies for
Silicon Microstrip Tracking Detectors at the HL-LHC" (PETTL), which was
supported by the Helmholtz Alliance "Physics at the Terascale" during the years
2013 and 2014. The aim of the project was to share experience and to work
together on key areas of mutual interest during the R&D phase of these
upgrades. The project concentrated on five areas, namely exchange of
experience, radiation hardness of silicon sensors, low mass system design,
automated precision assembly procedures, and irradiations. This report
summarizes the main achievements
Operational experience, improvements, and performance of the CDF Run II silicon vertex detector
The Collider Detector at Fermilab (CDF) pursues a broad physics program at
Fermilab's Tevatron collider. Between Run II commissioning in early 2001 and
the end of operations in September 2011, the Tevatron delivered 12 fb-1 of
integrated luminosity of p-pbar collisions at sqrt(s)=1.96 TeV. Many physics
analyses undertaken by CDF require heavy flavor tagging with large charged
particle tracking acceptance. To realize these goals, in 2001 CDF installed
eight layers of silicon microstrip detectors around its interaction region.
These detectors were designed for 2--5 years of operation, radiation doses up
to 2 Mrad (0.02 Gy), and were expected to be replaced in 2004. The sensors were
not replaced, and the Tevatron run was extended for several years beyond its
design, exposing the sensors and electronics to much higher radiation doses
than anticipated. In this paper we describe the operational challenges
encountered over the past 10 years of running the CDF silicon detectors, the
preventive measures undertaken, and the improvements made along the way to
ensure their optimal performance for collecting high quality physics data. In
addition, we describe the quantities and methods used to monitor radiation
damage in the sensors for optimal performance and summarize the detector
performance quantities important to CDF's physics program, including vertex
resolution, heavy flavor tagging, and silicon vertex trigger performance.Comment: Preprint accepted for publication in Nuclear Instruments and Methods
A (07/31/2013
Physics at the e+ e- Linear Collider
A comprehensive review of physics at an e+e- Linear Collider in the energy
range of sqrt{s}=92 GeV--3 TeV is presented in view of recent and expected LHC
results, experiments from low energy as well as astroparticle physics.The
report focuses in particular on Higgs boson, Top quark and electroweak
precision physics, but also discusses several models of beyond the Standard
Model physics such as Supersymmetry, little Higgs models and extra gauge
bosons. The connection to cosmology has been analyzed as well.Comment: 179 pages, plots and references updated, version to be published at
EPJ
- âŠ