Improving the first-line treatment of febrile illnesses in Ghana: willingness to pay for malaria rapid diagnostic tests at licensed chemical shops in the Kintampo area

Background: Use of malaria rapid diagnostic test (mRDT) enhances patient management and reduces costs associated with the inappropriate use of antimalarials. Despite its proven clinical effectiveness, mRDT is not readily available at licensed chemical shops in Ghana. Therefore, in order to improve the use of mRDT, there is the need to understand the willingness to pay for and sell mRDT. This study assessed patients’ willingness to pay and licensed chemical operators’ (LCS) willingness to sell mRDTs. Methods: The study was a cross-sectional survey conducted in Kintampo North Municipality and Kintampo South District of Ghana. Contingent valuation method using the dichotomous approach was applied to explore patient’s willingness to pay. In-depth interviews (IDIs) were used to obtain information from licensed chemical operators’ willingness to sell. Results: Majority 161 (97%) of the customers were willing to pay for mRDT while 100% of licensed chemical operators were also willing to sell mRDT. The average lowest amount respondents were willing to pay was Ghana cedis (GH¢) 1.1 (US$0.26) and an average highest amount of GH¢ 2.1 (US$ 0.49). LCS operators were willing to sell the test kit at an average lowest price of GH¢1 (US$0.23) and average highest price of GH¢2 (US$ 0.47). Conclusion: Community members were willing to pay for mRDT and LCS operators are willing to sell mRDTs. However, the high cost of the mRDT is likely to prevent the widespread use of mRDT. There is a clear need to find system-compatible ways to subsidize the use of mRDT via National Health Insurance scheme

Textile sensors for stab and cut detection

Manufacturers are aiming for more flexible and lightweight protective clothing to increase wearing comfort. A cardigan with a knitted stab-resistant inlay and an alarm system is presented. The stab-resistant inlay is based on a multilayer ultra-high molecular weight poly ethylene (UHMW-PE) fabric. Stab resistance was evaluated according to the standard of the Association of Test Laboratories for Bullet, Stab or Pike Resistant Materials and Construction Standard (VPAM 2011). Furthermore sensors for the detection of cuts and pressure were integrated. Both sensors can trigger alarms if the wearer is attacked. Normal pressure occurring through leaning on a wall or sitting is filtered out and does not trigger an alarm

Making Muscle Elastic: The Structural Basis of Myomesin Stretching

The muscle M-band protein myomesin comprises a 36-nm long filament made of repetitive immunoglobulin–helix modules that can stretch to 2.5-fold this length, demonstrating substantial molecular elasticity

HV/HR-CMOS sensors for the ATLAS upgrade—concepts and test chip results

In order to extend its discovery potential, the Large Hadron Collider (LHC) will have a major upgrade (Phase II Upgrade) scheduled for 2022. The LHC after the upgrade, called High-Luminosity LHC (HL-LHC), will operate at a nominal leveled instantaneous luminosity of 5× 1034 cm−2 s−1, more than twice the expected Phase I . The new Inner Tracker needs to cope with this extremely high luminosity. Therefore it requires higher granularity, reduced material budget and increased radiation hardness of all components. A new pixel detector based on High Voltage CMOS (HVCMOS) technology targeting the upgraded ATLAS pixel detector is under study. The main advantages of the HVCMOS technology are its potential for low material budget, use of possible cheaper interconnection technologies, reduced pixel size and lower cost with respect to traditional hybrid pixel detector. Several first prototypes were produced and characterized within ATLAS upgrade R&D effort, to explore the performance and radiation hardness of this technology. In this paper, an overview of the HVCMOS sensor concepts is given. Laboratory tests and irradiation tests of two technologies, HVCMOS AMS and HVCMOS GF, are also given

Radiation-hard active pixel sensors for HL-LHC detector upgrades based on HV-CMOS technology

Luminosity upgrades are discussed for the LHC (HL-LHC) which would make updates to the detectors necessary, requiring in particular new, even more radiation-hard and granular, sensors for the inner detector region. A proposal for the next generation of inner detectors is based on HV-CMOS: a new family of silicon sensors based on commercial high-voltage CMOS technology, which enables the fabrication of part of the pixel electronics inside the silicon substrate itself. The main advantages of this technology with respect to the standard silicon sensor technology are: low material budget, fast charge collection time, high radiation tolerance, low cost and operation at room temperature. A traditional readout chip is still needed to receive and organize the data from the active sensor and to handle high-level functionality such as trigger management. HV-CMOS has been designed to be compatible with both pixel and strip readout. In this paper an overview of HV2FEI4, a HV-CMOS prototype in 180 nm AMS technology, will be given. Preliminary results after neutron and X-ray irradiation are shown

Can we import quality tools? a feasibility study of European practice assessment in a country with less organised general practice

<p>Abstract</p> <p>Background</p> <p>Quality is on the agenda of European general practice (GP). European researchers have, in collaboration, developed tools to assess quality of GPs. In this feasibility study, we tested the European Practice Assessment (EPA) in a one-off project in Belgium, where general practice has a low level of GP organisation.</p> <p>Methods</p> <p>A framework for feasibility analysis included describing the recruiting of participants, a brief telephone study survey among non-responders, organisational and logistic problems. Using field notes and focus groups, we studied the participants' opinions.</p> <p>Results</p> <p>In this study, only 36 of 1000 invited practices agreed to participate. Co-ordination, administrative work, practice visits and organisational problems required several days per practice. The researchers further encountered technical problems, for instance when entering the data and uploading to the web-based server. In subsequent qualitative analysis using two focus groups, most participant GPs expressed a positive feeling after the EPA procedure. In the short period of follow-up, only a few GPs reported improvements after the visit. The participant GPs suggested that follow-up and coaching would probably facilitate the implementation of changes.</p> <p>Conclusion</p> <p>This feasibility study shows that prior interest in EPA is low in the GP community. We encountered a number of logistic and organisational problems. It proved attractive to participants, but it can be augmented by coaching of participants in more than a one-off project to identify and achieve targets for quality improvement. In the absence of commitment of the government, a network of universities and one scientific organisation will offer EPA as a service to training practices.</p