15 research outputs found
Ultraefficient Thermophotovoltaic Power Conversion By Band-Edge Spectral Filtering
Thermophotovoltaic power conversion utilizes thermal radiation from a local heat source to generate electricity in a photovoltaic cell. It was shown in recent years that the addition of a highly reflective rear mirror to a solar cell maximizes the extraction of luminescence. This, in turn, boosts the voltage, enabling the creation of record-breaking solar efficiency. Now we report that the rear mirror can be used to create thermophotovoltaic systems with unprecedented high thermophotovoltaic efficiency. This mirror reflects low-energy infrared photons back into the heat source, recovering their energy. Therefore, the rear mirror serves a dual function; boosting the voltage and reusing infrared thermal photons. This allows the possibility of a practical \u3e50% efficient thermophotovoltaic system. Based on this reflective rear mirror concept, we report a thermophotovoltaic efficiency of 29.1 卤 0.4% at an emitter temperature of 1,207 掳C
Rapid serial naming: Developmental trajectory and relationship with the Bangor Dyslexia Test in Spanish students
This study aimed to analyse the developmental trajectory of the accuracy and speed of naming among dyslexics and developing readers from 1st to 6th grade of primary education. It examined how familiarity with the stimulus influences the performance of different naming tasks in both groups and evaluated the link between naming speed and the Bangor Dyslexia Test. With a descriptive and correlational design, eight naming tasks and the Bangor Dyslexia Test (Miles, 1982; Out贸n & Su谩rez, 2010) were administered to a sample of 198 dyslexics and 245 developing readers. The results showed that the dyslexics were slower and more inaccurate in all the naming tasks, compared with the developing readers of the same age. Greater difficulty was observed with the less familiar stimuli. It became evident that naming performance improved with age among both groups of subjects. Finally, a greater number of significant and positive correlations were found between the naming tasks and the Bangor Dyslexia Test in the dyslexic group; the strongest relationship was obtained by naming lettersS
Charge extraction via graded doping of hole transport layers gives highly luminescent and stable metal halide perovskite devices.
One source of instability in perovskite solar cells (PSCs) is interfacial defects, particularly those that exist between the perovskite and the hole transport layer (HTL). We demonstrate that thermally evaporated dopant-free tetracene (120 nm) on top of the perovskite layer, capped with a lithium-doped Spiro-OMeTAD layer (200 nm) and top gold electrode, offers an excellent hole-extracting stack with minimal interfacial defect levels. For a perovskite layer interfaced between these graded HTLs and a mesoporous TiO2 electron-extracting layer, its photoluminescence yield reaches 15% compared to 5% for the perovskite layer interfaced between TiO2 and Spiro-OMeTAD alone. For PSCs with graded HTL structure, we demonstrate efficiency of up to 21.6% and an extended power output of over 550 hours of continuous illumination at AM1.5G, retaining more than 90% of the initial performance and thus validating our approach. Our findings represent a breakthrough in the construction of stable PSCs with minimized nonradiative losses.Cambridge Materials Limite
Strain rate and loading modes in DMTA experiments on ethylene/propylene block copolymers
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Metal halide perovskites are of great interest for various high-performance optoelectronic applications. The ability to tune the perovskite bandgap continuously by modifying the chemical composition opens up applications for perovskites as coloured emitters, in building-integrated photovoltaics, and as components of tandem photovoltaics to increase the power conversion efficiency. Nevertheless, performance is limited by non-radiative losses, with luminescence yields in state-of-the-art perovskite solar cells still far from 100 per cent under standard solar illumination conditions. Furthermore, in mixed halide perovskite systems designed for continuous bandgap tunability2 (bandgaps of approximately 1.7 to 1.9 electronvolts), photoinduced ion segregation leads to bandgap instabilities. Here we demonstrate substantial mitigation of both non-radiative losses and photoinduced ion migration in perovskite films and interfaces by decorating the surfaces and grain boundaries with passivating potassium halide layers. We demonstrate external photoluminescence quantum yields of 66 per cent, which translate to internal yields that exceed 95 per cent. The high luminescence yields are achieved while maintaining high mobilities of more than 40 square centimetres per volt per second, providing the elusive combination of both high luminescence and excellent charge transport. When interfaced with electrodes in a solar cell device stack, the external luminescence yield鈥攁 quantity that must be maximized to obtain high efficiency鈥攔emains as high as 15 per cent, indicating very clean interfaces. We also demonstrate the inhibition of transient photoinduced ion-migration processes across a wide range of mixed halide perovskite bandgaps in materials that exhibit bandgap instabilities when unpassivated. We validate these results in fully operating solar cells. Our work represents an important advance in the construction of tunable metal halide perovskite films and interfaces that can approach the efficiency limits in tandem solar cells, coloured-light-emitting diodes and other optoelectronic applications.M.A.-J. thanks Nava Technology Limited and Nyak Technology Limited for their funding and technical support. Z.A.-G. acknowledges funding from a Winton Studentship, and ICON Studentship from the Lloyd鈥檚 Register Foundation. This project has received funding from the European Union鈥檚 Seventh Framework Programme (FP7/2007-2013) under REA grant agreement number PIOF-GA-2013-622630, the European Research Council (ERC) under the European Union鈥檚 Horizon 2020 research and innovation programme (grant agreement number 756962), and the Royal Society and Tata Group (UF150033). We thank the Engineering and Physical Sciences Research Council (EPSRC) for support. XMaS is a mid-range facility at the European Synchrotron Radiation Facility supported by the EPSRC and we are grateful to the XMaS beamline team staff for their support. We thank Diamond Light Source for access to beamline I09 and staff member T.-L. Lee as well as U. Cappel for assistance during the HAXPES measurements. S.C., C.D. and G.D. acknowledge funding from the ERC under grant number 25961976 PHOTO EM and financial support from the European Union under grant number 77 312483 ESTEEM2. M.A. thanks the president of the UAE鈥檚 Distinguished Student Scholarship Program, granted by the Ministry of Presidential Affairs. H.R. and B.P. acknowledge support from the Swedish research council (2014-6019) and the Swedish foundation for strategic research. E.M.H. and T.J.S. were supported by the Netherlands Organization for Scientific Research under the Echo grant number 712.014.007
Strain rate and loading modes in DMTA experiments on ethylene/propylene block copolymers
A broad experimental programme using Dynamical-Mechanical Thermal Analysis (DMTA) was carried out on ethylene/propylene block copolymers (EPBC). The samples were subjected to frequency scans to evaluate the dependence of stored modulus on frequency. Tests were conducted on similar samples using different loading modes such as single cantilever, dual cantilever and tension configurations. If the stored modulus is plotted versus the test frequency, a different trend corresponding to each loading mode is obtained. Similar conclusions can be drawn regarding the glass transition temperature. In this work, strain rate, instead of frequency, is used to compare results provided by different loading modes. If the strain rate is used as the reference variable, a unique trend is observed despite the loading modes used to perform the experiment. 漏 2014 Springer Science+Business Media Dordrecht.Peer Reviewe
Rapid serial naming: Developmental trajectory and relationship with the Bangor Dyslexia Test in Spanish students
Size and shape dependence of the exchange-bias field in exchange-coupled ferrimagnetic bilayers
Exchange biasing was studied in an exchange-spring system consisting of two ferrimagnetic films with different coercivity. Magnetite and Co-Fe ferrite were chosen as the soft and hard magnetic bilayer components, respectively. The samples were epitaxially grown on MgO single crystal substrates by pulsed laser deposition. The exchange-bias field was investigated as a function of system size and shape, magnetic field direction and magnetization reversal in the hard layer. A clear dependence of the exchange-bias field on the sample size and shape was found. This was attributed to an interplay between exchange and dipolar energies. Micromagnetic simulations agree with the experimental results. Copyright EDP Sciences/Societ脿 Italiana di Fisica/Springer-Verlag 2005