Influence of enhanced melt supply on upper crustal structure at a mid-ocean ridge discontinuity: A three-dimensional seismic tomographic study of 9°N East Pacific Rise

We present a three-dimensional upper crustal model of the 9°03′N overlapping spreading center (OSC) on the East Pacific Rise that assists in understanding the relationship between melt sills and upper crustal structure at a ridge discontinuity with enhanced melt supply at crustal levels. Our P wave velocity model obtained from tomographic inversion of ∼70,000 crustal first arrival travel times suggests that the geometry of extrusive emplacement are significantly different beneath the overlapping spreading limbs. Extrusive volcanic rocks above the western melt sill are inferred to be thin (∼250 m). More extensive accumulation of extrusives is inferred to the west than to the east of the western melt sill. The extrusive layer inferred above the eastern melt sill thickens from ∼350 (at the neovolcanic axis) to 550 m (to the west of the melt sill). Volcanic construction is likely to be significant in the formation of ridge crest morphology at the OSC, particularly at the tip of the eastern limb. On the basis of our interpretation of the velocity model, we propose that enhanced magma supply at crustal levels at the OSC may provide an effective mechanism for the migration of ridge discontinuities. This “dynamic magma supply model” may explain the commonly observed nonsteady migration pattern of ridge discontinuities by attributing this to the temporal fluctuations in melt availability to the overlapping spreading limbs

Database of diazotrophs in global ocean: abundance, biomass and nitrogen fixation rates

Marine N2 fixing microorganisms, termed diazotrophs, are a key functional group in marine pelagic ecosystems. The biological fixation of dinitrogen (N2) to bioavailable nitrogen provides an important new source of nitrogen for pelagic marine ecosystems and influences primary productivity and organic matter export to the deep ocean. As one of a series of efforts to collect biomass and rates specific to different phytoplankton functional groups, we have constructed a database on diazotrophic organisms in the global pelagic upper ocean by compiling about 12 000 direct field measurements of cyanobacterial diazotroph abundances (based on microscopic cell counts or qPCR assays targeting the nifH genes) and N2 fixation rates. Biomass conversion factors are estimated based on cell sizes to convert abundance data to diazotrophic biomass. The database is limited spatially, lacking large regions of the ocean especially in the Indian Ocean. The data are approximately log-normal distributed, and large variances exist in most sub-databases with non-zero values differing 5 to 8 orders of magnitude. Reporting the geometric mean and the range of one geometric standard error below and above the geometric mean, the pelagic N2 fixation rate in the global ocean is estimated to be 62 (52–73) Tg N yr?1 and the pelagic diazotrophic biomass in the global ocean is estimated to be 2.1 (1.4–3.1) Tg C from cell counts and to 89 (43–150) Tg C from nifH-based abundances. Reporting the arithmetic mean and one standard error instead, these three global estimates are 140 ± 9.2 Tg N yr?1, 18 ± 1.8 Tg C and 590 ± 70 Tg C, respectively. Uncertainties related to biomass conversion factors can change the estimate of geometric mean pelagic diazotrophic biomass in the global ocean by about ±70%. It was recently established that the most commonly applied method used to measure N2 fixation has underestimated the true rates. As a result, one can expect that future rate measurements will shift the mean N2 fixation rate upward and may result in significantly higher estimates for the global N2 fixation. The evolving database can nevertheless be used to study spatial and temporal distributions and variations of marine N2 fixation, to validate geochemical estimates and to parameterize and validate biogeochemical models, keeping in mind that future rate measurements may rise in the future. The database is stored in PANGAEA (doi:10.1594/PANGAEA.774851)

Cleanup and treatment (CAT) test: a land-area decontamination project utilizing a vacuum method of soil removal

Areas 11 and 13 of the Nevada Test Site (NTS) are contaminated with varying concentrations of Pu-239, 240 and Am-241. An investigation of a vacuum method of soil removal, the Cleanup and Treatment (CAT) test, was conducted over a 3-month period in the plutonium safety shot or Plutonium Valley portion of Area 11. Soil in Plutonium Valley is of the Aridisol Order. The surface 0 to 10 cm is a gravelly loam, and is strongly alkaline (pH 8.8). A large truck-mounted vacuum unit, rather than conventional earth-moving equipment, was used as the primary soil collection unit. Effectiveness of the vacuum method of soil removal was evaluated in relation to conventional earthmoving procedures, particularly in terms of volume reduction of removed soil achieved over conventional techniques. Radiological safety considerations associated with use of the vacuum unit were evaluated in relation to their impact on a full-scale land decontamination program. Environmental and operational impacts of devegetation with retention of root crowns or root systems were investigated. It is concluded that the CAT test was successful under difficult environmental conditions

Nevada Test Site Area 25. Radiological survey and cleanup project, 1974-1983. Final report

This report describes radiological survey, decontamination and decommissioning of the Nevada Test Site (NTS) Area 25 facilities and land areas incorporated in the Nuclear Rocket Development Station (NRDS). Buildings, facilities and support systems used after 1959 for nuclear reactor and engine testing were surveyed for the presence of radioactive contamination. The cleanup was part of the Surplus Facilities Management Program funded by the Department of Energy's Richland Operations Office. The radiological survey portion of the project encompassed portable instrument surveys and removable contamination surveys (swipe) for alpha and beta plus gamma radiation contamination of facilities, equipment and land areas. Soil sampling was also accomplished. The majority of Area 25 facilities and land areas have been returned to unrestricted use. Remaining radiologically contaminated areas are posted with warning signs and barricades. 12 figures

Influence of enhanced melt supply on upper crustal structure at a mid-ocean ridge discontinuity: A three-dimensional seismic tomographic study of 9N East Pacific Rise

We present a three-dimensional upper crustal model of the 9degrees03'N overlapping spreading center (OSC) on the East Pacific Rise that assists in understanding the relationship between melt sills and upper crustal structure at a ridge discontinuity with enhanced melt supply at crustal levels. Our P wave velocity model obtained from tomographic inversion of similar to 70,000 crustal first arrival travel times suggests that the geometry of extrusive emplacement are significantly different beneath the overlapping spreading limbs. Extrusive volcanic rocks above the western melt sill are inferred to be thin ( similar to 250 m). More extensive accumulation of extrusives is inferred to the west than to the east of the western melt sill. The extrusive layer inferred above the eastern melt sill thickens from similar to 350 ( at the neovolcanic axis) to 550 m ( to the west of the melt sill). Volcanic construction is likely to be significant in the formation of ridge crest morphology at the OSC, particularly at the tip of the eastern limb. On the basis of our interpretation of the velocity model, we propose that enhanced magma supply at crustal levels at the OSC may provide an effective mechanism for the migration of ridge discontinuities. This "dynamic magma supply model'' may explain the commonly observed nonsteady migration pattern of ridge discontinuities by attributing this to the temporal fluctuations in melt availability to the overlapping spreading limb

Evidence from three-dimensional seismic reflectivity images for enhanced melt supply beneath mid-ocean-ridge discontinuities

Quantifying the melt distribution and crustal structure across ridge-axis discontinuities is essential for understanding the relationship between magmatic, tectonic and petrologic segmentation of mid-ocean-ridge spreading centres. The geometry and continuity of magma bodies beneath features such as overlapping spreading centres can strongly influence the composition of erupted lavas and may give insight into the underlying pattern of mantle flow. Here we present three-dimensional images of seismic reflectivity beneath a mid-ocean ridge to investigate the nature of melt distribution across a ridge-axis discontinuity. Reflectivity slices through the 9° 03' N overlapping spreading centre on East Pacific Rise suggest that it has a robust magma supply, with melt bodies underlying both limbs and ponding of melt beneath large areas of the overlap basin. The geometry of melt distribution beneath this offset is inconsistent with large-scale, crustal redistribution of melt away from centres of upwelling. The complex distribution of melt seems instead to be caused by a combination of vertical melt transport from the underlying mantle and subsequent focusing of melt beneath a magma freezing boundary in the mid-crust