251 research outputs found
The mutual effect of precipitated auroral electrons and the auroral electrojet
Computer model calculations of mutual effects of precipitated auroral electrons and electroje
Comparisons of various configurations of the edge delamination test for interlaminar fracture toughness
Various configurations of Edge Delamination Tension (EDT) test specimens, of both brittle (T300/5208) and toughened-matrix (T300/BP907) graphite reinforced composite laminates, were manufactured and tested. The mixed-mode interlaminar fracture toughness, G sub C, was measured using (30/30 sub 2/30/90 sub N)sub s, n=1 or 2, (35/-35/0/90) sub s and (35/0/-35/90) sub s layups designed to delaminate at low tensile strains. Laminates were made without inserts so that delaminations would form naturally between the central 90 deg plies and the adjacent angle plies. Laminates were also made with Teflon inserts implanted between the 90 deg plies and the adjacent angle (theta) plies at the straight edge to obtain a planar fracture surface. In addition, interlaminar tension fracture toughness, GIc, was measured from laminates with the same layup but with inserts in the midplane, between the central 90 deg plies, at the straight edge. All of the EDT configurations were useful for ranking the delamination resistance of composites with different matrix resins. Furthermore, the variety of layups and configurations available yield interlaminar fracture toughness measurements needed to generate delamination failure criteria. The influence of insert thickness and location, and coupon size on G sub c values were evaluated
Interlaminar fracture toughness of thermoplastic composites
Edge delamination tension and double cantilever beam tests were used to characterize the interlaminar fracture toughness of continuous graphite-fiber composites made from experimental thermoplastic polyimides and a model thermoplastic. Residual thermal stresses, known to be significant in materials processed at high temperatures, were included in the edge delamination calculations. In the model thermoplastic system (polycarbonate matrix), surface properties of the graphite fiber were shown to be significant. Critical strain energy release rates for two different fibers having similar nominal tensile properties differed by 30 to 60 percent. The reason for the difference is not clear. Interlaminar toughness values for the thermoplastic polyimide composites (LARC-TPI and polyimidesulfone) were 3 to 4 in-lb/sq in. Scanning electron micrographs of the EDT fracture surfaces suggest poor fiber/matrix bonding. Residual thermal stresses account for up to 32 percent of the strain energy release in composites made from these high-temperature resins
Analysis of local delaminations caused by angle ply matrix cracks
Two different families of graphite/epoxy laminates with similar layups but different stacking sequences, (0,theta,-theta) sub s and (-theta/theta/0) sub s were analyzed using three-dimensional finite element analysis for theta = 15 and 30 degrees. Delaminations were modeled in the -theta/theta interface, bounded by a matrix crack and the stress free edge. The total strain energy release rate, G, along the delamination front was computed using three different techniques: the virtual crack closure technique (VCCT), the equivalent domain Integral (EDI) technique, and a global energy balance technique. The opening fracture mode component of the strain energy release rate, Gl, along the delamination front was also computed for various delamination lengths using VCCT. The effect of residual thermal and moisture stresses on G was evaluated
Simple mixing criteria for the growth of negatively buoyant phytoplankton
Phytoplankton population dynamics are controlled by the relative rather than absolute timescales of mixing, growth, and loss processes such as sedimentation, grazing, and so on. Here, the vertical distribution and biomass of phytoplankton populations are quantified by two timescale ratios: the Peclet number Pe the ratio of mixing and sedimentation timescales-and the growth number G the ratio of sedimentation and net growth timescales. Three mixing regimes are defined for phytoplankton and other particles. For Pe greater than or equal to 100, the population is translated linearly down the water column over time and will leave the surface mixing layer completely after sedimentation time 7, For 0.
Witnessing eigenstates for quantum simulation of Hamiltonian spectra
The efficient calculation of Hamiltonian spectra, a problem often intractable
on classical machines, can find application in many fields, from physics to
chemistry. Here, we introduce the concept of an "eigenstate witness" and
through it provide a new quantum approach which combines variational methods
and phase estimation to approximate eigenvalues for both ground and excited
states. This protocol is experimentally verified on a programmable silicon
quantum photonic chip, a mass-manufacturable platform, which embeds entangled
state generation, arbitrary controlled-unitary operations, and projective
measurements. Both ground and excited states are experimentally found with
fidelities >99%, and their eigenvalues are estimated with 32-bits of precision.
We also investigate and discuss the scalability of the approach and study its
performance through numerical simulations of more complex Hamiltonians. This
result shows promising progress towards quantum chemistry on quantum computers.Comment: 9 pages, 4 figures, plus Supplementary Material [New version with
minor typos corrected.
Quantum walks of correlated particles
Quantum walks of correlated particles offer the possibility to study
large-scale quantum interference, simulate biological, chemical and physical
systems, and a route to universal quantum computation. Here we demonstrate
quantum walks of two identical photons in an array of 21 continuously
evanescently-coupled waveguides in a SiOxNy chip. We observe quantum
correlations, violating a classical limit by 76 standard deviations, and find
that they depend critically on the input state of the quantum walk. These
results open the way to a powerful approach to quantum walks using correlated
particles to encode information in an exponentially larger state space
Discovery of an Afterglow Extension of the Prompt Phase of Two Gamma Ray Bursts Observed by Swift
Contemporaneous BAT and XRT observations of two recent well-covered GRBs observed by Swift, GRB 050315 and GRB 050319, show clearly a prompt component joining the onset of the afterglow emission. The rapid slewing capability of the spacecraft enables X-ray observations immediately after the burst, typically ~ 100 s following the initiation of the prompt y-ray phase. By fitting a power law form to the y-ray spectrum, we extrapolate the time dependent fluxes measured by the BAT, in the energy band 15 - 350 keV, into the spectral regime observed by the XRT 0.2 - 10 keV, and examine the functional form of the rate of decay of the two light curves. We find that the BAT and XRT light curves merge to form a unified curve. There is a period of steep decay up to ~ 300 s, followed by a flatter decay. The duration of the steep decay, ~ 100 s in the source frame after correcting for cosmological time dilation, agrees roughly with a theoretical estimate for the deceleration time of the relativistic ejecta as it interacts with circumstellar material. For GRB 050315, the steep decay can be characterized by an exponential form, where one e-folding decay time Te (BAT)~ = 24 f 2 s, and Te,(XRT)~ = 35 f 2 s. For GRB 050319, a power law decay - d l n f / d l n t = n, where n approx. ~ = 3, provides a reasonable fit. The early time X-ray fluxes are consistent with representing the lower energy tail of the prompt emission, and provide our first quantitative measure of the decay of the prompt y-ray emission over a large dynamic range in flux. The initial steep decay is expected due to the delayed high latitude photons from a curved shell of relativistic plasma illuminated only for a short interval. The overall conclusion is that the prompt phase of GRBs remains observable for hundreds of seconds longer than previously thought
Gateway state-mediated, long-range tunnelling in molecular wires
If the factors controlling the decay in single-molecule electrical conductance G with molecular length L could be understood and controlled, then this would be a significant step forward in the design of high-conductance molecular wires. For a wide variety of molecules conducting by phase coherent tunneling, conductance G decays with length following the relationship G = Aexp-\b{\eta}L. It is widely accepted that the attenuation coefficient \b{\eta} is determined by the position of the Fermi energy of the electrodes relative to the energy of frontier orbitals of the molecular bridge, whereas the terminal anchor groups which bind to the molecule to the electrodes contribute to the pre-exponential factor A. We examine this premise for several series of molecules which contain a central conjugated moiety (phenyl, viologen or {\alpha}-terthiophene) connected on either side to alkane chains of varying length, with each end terminated by thiol or thiomethyl anchor groups. In contrast with this expectation, we demonstrate both experimentally and theoretically that additional electronic states located on thiol anchor groups can significantly decrease the value of \b{eta}, by giving rise to resonances close to EF through coupling to the bridge moiety. This interplay between the gateway states and their coupling to a central conjugated moiety in the molecular bridges creates a new design strategy for realising higher-transmission molecular wires by taking advantage of the electrode-molecule interface properties
Trapping malicious insiders in the SPDR web
Abstract The insider threat has assumed increasing importance as our dependence on critical cyber information infrastructure has increased. In this paper we describe an approach for thwarting and attributing insider attacks. The Sense, Prepare, Detect, and React (SPDR
- …