298 research outputs found

    Developing an agro-forestry system for production of a commercial organic chicken flock focusing on profits on a 'Triple bottom Line'

    Get PDF
    In most modern free-range poultry systems birds do not fully utilise the range provided. Knowledge of the ancestral history of the domestic chicken, and research observations suggests benefits of agro-forestry systems for chickens. A commercial organic poultry agro-forestry system was developed for Sheepdrove Organic Farm, Berkshire, UK, affording the benefi ts of an agro-forestry system, whilst retaining commercial viability. Five avenues of highly diverse parallel hedges incorporating tree, shrub and herb species were planted. On-going monitoring of the system was put in place to evaluate its development and help assess the types of ‘profits’ the system delivers. Conventionally profits tend to be viewed purely in terms of economic gain. However, in an organic farming system more emphasis is placed on the intrinsic and sustainable qualities it has. Organic farming adopts a holistic approach to profit, viewing it in environmental, social and economic terms. The profits afforded by the system are discussed

    Center-to-Limb Variation of Solar 3-D Hydrodynamical Simulations

    Get PDF
    We examine closely the solar Center-to-Limb variation of continua and lines and compare observations with predictions from both a 3-D hydrodynamic simulation of the solar surface (provided by M. Asplund and collaborators) and 1-D model atmospheres. Intensities from the 3-D time series are derived by means of the new synthesis code ASSET, which overcomes limitations of previously available codes by including a consistent treatment of scattering and allowing for arbitrarily complex line and continuum opacities. In the continuum, we find very similar discrepancies between synthesis and observation for both types of model atmospheres. This is in contrast to previous studies that used a ``horizontally'' and time averaged representation of the 3-D model and found a significantly larger disagreement with observations. The presence of temperature and velocity fields in the 3-D simulation provides a significant advantage when it comes to reproduce solar spectral line shapes. Nonetheless, a comparison of observed and synthetic equivalent widths reveals that the 3-D model also predicts more uniform abundances as a function of position angle on the disk. We conclude that the 3-D simulation provides not only a more realistic description of the gas dynamics, but, despite its simplified treatment of the radiation transport, it also predicts reasonably well the observed Center-to-Limb variation, which is indicative of a thermal structure free from significant systematic errors.Comment: 18 pages, 9 figures; accepted for publication in the Astrophysical Journal (June 1, 2008

    Higher-Dimensional Twistor Transforms using Pure Spinors

    Full text link
    Hughston has shown that projective pure spinors can be used to construct massless solutions in higher dimensions, generalizing the four-dimensional twistor transform of Penrose. In any even (Euclidean) dimension d=2n, projective pure spinors parameterize the coset space SO(2n)/U(n), which is the space of all complex structures on R^{2n}. For d=4 and d=6, these spaces are CP^1 and CP^3, and the appropriate twistor transforms can easily be constructed. In this paper, we show how to construct the twistor transform for d>6 when the pure spinor satisfies nonlinear constraints, and present explicit formulas for solutions of the massless field equations.Comment: 17 pages harvmac tex. Modified title, abstract, introduction and references to acknowledge earlier papers by Hughston and other

    Predictability of Self-Organizing Systems

    Full text link
    We study the predictability of large events in self-organizing systems. We focus on a set of models which have been studied as analogs of earthquake faults and fault systems, and apply methods based on techniques which are of current interest in seismology. In all cases we find detectable correlations between precursory smaller events and the large events we aim to forecast. We compare predictions based on different patterns of precursory events and find that for all of the models a new precursor based on the spatial distribution of activity outperforms more traditional measures based on temporal variations in the local activity.Comment: 15 pages, plain.tex with special macros included, 4 figure

    The Hamburg/ESO R-process Enhanced Star survey (HERES). V. Detailed abundance analysis of the r-process enhanced star HE 2327-5642

    Full text link
    We report on a detailed abundance analysis of the strongly r-process enhanced giant star, HE 2327-5642 ([Fe/H] = -2.78, [r/Fe] = +0.99). Determination of stellar parameters and element abundances was based on analysis of high-quality VLT/UVES spectra. The surface gravity was calculated from the NLTE ionization balance between Fe I and Fe II, and Ca I and Ca II. Accurate abundances for a total of 40 elements and for 23 neutron-capture elements beyond Sr and up to Th were determined. The heavy element abundance pattern of HE 2327-5642 is in excellent agreement with those previously derived for other strongly r-process enhanced stars. Elements in the range from Ba to Hf match the scaled Solar r-process pattern very well. No firm conclusion can be drawn with respect to a relationship between the fisrt neutron-capture peak elements, Sr to Pd, in HE 2327-5642 and the Solar r-process, due to the uncertainty of the latter. A clear distinction in Sr/Eu abundance ratios was found between the halo stars with different europium enhancement. The strongly r-process enhanced stars reveal a low Sr/Eu abundance ratio at [Sr/Eu] = -0.92+-0.13, while the stars with 0 < [Eu/Fe] < 1 and [Eu/Fe] < 0 have 0.36 dex and 0.93 dex larger Sr/Eu values, respectively. Radioactive dating for HE 2327-5642 with the observed thorium and rare-earth element abundance pairs results in an average age of 13.3 Gyr, when based on the high-entropy wind calculations, and 5.9 Gyr, when using the Solar r-residuals. HE 2327-5642 is suspected to be radial-velocity variable based on our high-resolution spectra, covering ~4.3 years.Comment: 16 pages, 12 figures, accepted to A&

    Fundamental Parameters and Abundances of Metal-Poor Stars: The SDSS Standard BD +17 4708

    Get PDF
    The atmospheric parameters and iron abundance of the Sloan Digital Sky Survey (SDSS) spectrophotometric standard star BD +17 4708 are critically examined using up-to-date Kurucz model atmospheres, LTE line formation calculations, and reliable atomic data. We find Teff = 6141+-50 K, log g = 3.87+-0.08, and [Fe/H]=-1.74+-0.09. The line-of-sight interstellar reddening, bolometric flux, limb-darkened angular diameter, stellar mass, and the abundances of Mg, Si, and Ca are also obtained. This star is a unique example of a moderately metal-poor star for which the effective temperature can be accurately constrained from the observed spectral energy distribution (corrected for reddening). Such analysis leads to a value that is higher than most spectroscopic results previously reported in the literature (~5950 K). We find that the ionization balance of Fe lines is satisfied only if a low Teff (~5950 K) is adopted. With our preferred Teff (6141 K), the mean iron abundance we obtain from the FeII lines is lower by about 0.15 dex than that from the FeI lines, and therefore, the discrepancy between the mean iron abundance from FeI and FeII lines cannot be explained by overionization by UV photons as the main non-LTE effect. We also comment on non-LTE effects and the importance of inelastic collisions with neutral H atoms in the determination of oxygen abundances in metal-poor stars from the 777 nm OI triplet. (Abridged)Comment: A&A in pres

    General practitioners and tutors' experiences with peer group academic detailing: a qualitative study

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>The Prescription Peer Academic Detailing (Rx-PAD) project is an educational intervention study aiming at improving GPs' competence in pharmacotherapy. GPs in CME peer groups were randomised to receive a tailored intervention, either to support a safer prescription practice for elderly patients or to improve prescribing of antibiotics to patients with respiratory tract infections. The project was based on the principles of peer group academic detailing, incorporating individual feedback on GPs' prescription patterns. We did a study to explore GPs and tutors' experiences with peer group academic detailing, and to explore GPs' reasons for deviating from recommended prescribing practice.</p> <p>Methods</p> <p>Data was collected through nine focus group interviews with a total of 39 GPs and 20 tutors. Transcripts from the interviews were analyzed by two researchers according to a procedure for thematic content analysis.</p> <p>Results</p> <p>A shared understanding of the complex decision-making involved in prescribing in general practice was reported by both GPs and tutors as essential for an open discussion in the CME groups. Tutors experienced that CME groups differed regarding structure and atmosphere, and in some groups it was a challenge to run the scheme as planned. Individual feedback motivated GPs to reflect on and to improve their prescribing practice, though feedback reports could cause distress if the prescribing practice was unfavourable. Explanations for inappropriate prescriptions were lack of knowledge, factors associated with patients, the GP's background, the practice, and other health professionals or health care facilities.</p> <p>Conclusions</p> <p>GPs and tutors experienced peer group academic detailing as a suitable method to discuss and learn more about pharmacotherapy. An important outcome for GPs was being more reflective about their prescriptions. Disclosure of inappropriate prescribing can cause distress in some doctors, and tutors must be prepared to recognise and manage such reactions.</p

    A quantitative investigation for deployment of mobile collaborative robots in high-value manufacturing

    Get PDF
    Component inspection is often the bottleneck in high-value manufacturing, driving industries like aerospace toward automated inspection technologies. Current systems often employ fixed arm robots, but they lack the flexibility in adapting to new components or orientations Advanced mobile robotic platforms with updated sensor technologies and algorithms have improved localization and path planning capabilities, making them ideal for bringing inspection processes directly to parts. However, mobile platforms introduce challenges in localization and maneuverability, leading to potential errors. Their positional uncertainty is higher than fixed systems due to the lack of a fixed calibrated location, posing challenges for position-sensitive inspection sensors. Therefore, it's essential to assess the positional accuracy and repeatability of mobile manipulator platforms. The KUKA KMR iiwa was chosen for its collaborative features, robust build, and scalability within the KUKA product range. The accuracy and repeatability of the mobile platform were evaluated through a series of tests to evaluate the performance of its integrated feature mapping, the effect of various speeds on positional accuracy, and the efficiency of the omnidirectional wheels for a range of translation orientations. Experimental evaluation revealed that enabling feature mapping substantially improves the KUKA KMR iiwa's performance, with accuracy gains and error reductions exceeding 90%. Repeatability errors were under 7 mm with mapping activated and around 2.5 mm in practical scenarios, demonstrating that mobile manipulators, incorporating both the manipulator and platform, can fulfil the precise requirements of industries with high precision needs. Providing a highly diverse alternative to traditional fixed-base industrial manipulators

    Novel insight into the etiology of autism spectrum disorder gained by integrating expression data with genome-wide association statistics

    Get PDF
    Background A recent genome-wide association study (GWAS) of autism spectrum disorders (ASD) (Ncases=18,381, Ncontrols=27,969) has provided novel opportunities for investigating the aetiology of ASD. Here, we integrate the ASD GWAS summary statistics with summary-level gene expression data to infer differential gene expression in ASD, an approach called transcriptome-wide association study (TWAS). Methods Using FUSION software, ASD GWAS summary statistics were integrated with predictors of gene expression from 16 human datasets, including adult and fetal brain. A novel adaptation of established statistical methods was then used to test for enrichment within candidate pathways, specific tissues, and at different stages of brain development. The proportion of ASD heritability explained by predicted expression of genes in the TWAS was estimated using stratified linkage disequilibrium-score regression. Results This study identified 14 genes as significantly differentially expressed in ASD, 13 of which were outside of known genome-wide significant loci (±500kb). XRN2, a gene proximal to an ASD GWAS locus, was inferred to be significantly upregulated in ASD, providing insight into functional consequence of this associated locus. One novel transcriptome-wide significant association from this study is the downregulation of PDIA6, which showed minimal evidence of association in the GWAS, and in gene-based analysis using MAGMA. Predicted gene expression in this study accounted for 13.0% of the total ASD SNP-heritability. Conclusion This study has implicated several genes as significantly up-/down-regulated in ASD providing novel and useful information for subsequent functional studies. This study also explores the utility of TWAS-based enrichment analysis and compares TWAS results with a functionally agnostic approach
    • 

    corecore