Microalgal Systems, a Green Solution for Wastewater Conventional Pollutants Removal, Disinfection, and Reduction of Antibiotic Resistance Genes Prevalence?

The low-efficiency rate of urban wastewater (UWW) treatment generates tons of discharged water with a high concentration of pollutants, pathogens and antibiotic-resistance genes (ARGs). Microalgal systems may be a green alternative to be implemented as a UWW polishing treatment. This study assessed the ability of Chlorella vulgaris and UWW autochthonous microalgal species (AMS) to simultaneously remove PO4-P, and reduce the proliferation of coliforms and ARGs. AMS seems to be more promising due to: (i) the higher specific growth rate, mu(max) (0.687 +/- 0.065 d(-1)); (ii) efficient PO4-P removal (92.62 +/- 0.10%); (iii) faster reduction of coliforms proliferation achieving concentrations below the limits of quantification (6 d); (iv) the reduction of intl1 and the ARGs sul1 and blaTEM abundance in ca. of 70.4%, 69.2%, and 75.7%, respectively (9 d); and (v) the additional reduction of these genes in ca. of 97.1%, 94.2%, and 99.9%, respectively, after 5 d storage in the dark and at room temperature. Results also revealed that the high pH values in both microalgal systems (due to microalgal growth) were highly correlated with a reduction in the proliferation of coliforms, including Escherichia coli. In conclusion, using AMS as a final polishing treatment of UWW seems to be very promising

Microalgae systems- environmental agents for wastewater treatment and further potential biomass valorisation

Water is the most valuable resource on the planet. However, massive anthropogenic activities generate threat-ening levels of biological, organic, and inorganic pollutants that are not efficiently removed in conventional wastewater treatment systems. High levels of conventional pollutants (carbon, nitrogen, and phosphorus), emerging chemical contaminants such as antibiotics, and pathogens (namely antibiotic-resistant ones and related genes) jeopardize ecosystems and human health. Conventional wastewater treatment systems entail several environmental issues: (i) high energy consumption; (ii) high CO2 emissions; and (iii) the use of chemicals or the generation of harmful by-products. Hence, the use of microalgal systems (entailing one or several microalgae species, and in consortium with bacteria) as environmental agents towards wastewater treatment has been seen as an environmentally friendly solution to remove conventional pollutants, antibiotics, coliforms and antibiotic resistance genes. In recent years, several authors have evaluated the use of microalgal systems for the treatment of different types of wastewater, such as agricultural, municipal, and industrial. Generally, microalgal systems can provide high removal efficiencies of: (i) conventional pollutants, up to 99%, 99%, and 90% of total nitrogen, total phosphorus, and/or organic carbon, respectively, through uptake mechanisms, and (ii) antibiotics frequently found in wastewaters, such as sulfamethoxazole, ciprofloxacin, trimethoprim and azithromycin at 86%, 65%, 42% and 93%, respectively, through the most desirable microalgal mechanism, biodegradation. Although pathogens removal by microalgal species is complex and very strain-specific, it is also possible to attain total coliform and Escherichia coli removal of 99.4% and 98.6%, respectively. However, microalgal systems' effectiveness strongly relies on biotic and abiotic conditions, thus the selection of operational conditions is critical. While the combination of selected species (microalgae and bacteria), ratios and inoculum concentration allow the efficient removal of conventional pollutants and generation of high amounts of biomass (that can be further converted into valuable products such as biofuels and biofertilisers), abiotic factors such as pH, hydraulic retention time, light intensity and CO2/O2 supply also have a crucial role in conventional pollutants and anti-biotics removal, and wastewater disinfection. However, some rationale must be considered according to the purpose. While alkaline pH induces the hydrolysis of some antibiotics and the removal of faecal coliforms, it also decreases phosphates solubility and induces the formation of ammonium from ammonia. Also, while CO2 supply increases the removal of E. coli and Pseudomonas aeruginosa, as well as the microalgal growth (and thus the conventional pollutants uptake), it decreases Enterococcus faecalis removal. Therefore, this review aims to pro-vide a critical review of recent studies towards the application of microalgal systems for the efficient removal of conventional pollutants, antibiotics, and pathogens; discussing the feasibility, highlighting the advantages and challenges of the implementation of such process, and presenting current case-studies of different applications of microalgal systems

Clinical presentation and survival of smear-positive pulmonary tuberculosis patients of a University General Hospital in a developing country

From January 1995 to August 1997 we evaluated prospectively the clinical presentation, laboratory findings and short-term survival of smear-positive pulmonary tuberculosis (TB) patients who sought care at our hospital. After providing informed, written consent, the patients were interviewed and laboratory tests were performed. Information about survivorship and death was collected through September 1998. Eighty-six smear-positive pulmonary TB patients were enrolled; 26.7% were HIV-seropositive. Seventeen HIV-seronegative pulmonary TB patients (19.8%) presented chronic diseases in addition to TB. In the multiple logistic regression analysis a CD4+ cell count or = 50 years were independently associated with decreased survival. Among HIV-seronegative persons, the presence of an additional disease increased the risk of death of almost six-fold. Use of antiretroviral drugs was associated with a lower risk of death among HIV-seropositive smear-positive pulmonary TB patients (RH = 0.32, 95% CI 0.10-0.92). In our study smear-positive pulmonary TB patients had a low short-term survival rate that was strongly associated with HIV infection, age and co-morbidities. Therapy with antiretroviral drugs reduced the short-term risk of death among HIV-seropositive patients after TB diagnosis

The complex interplay between antibiotic resistance and pharmaceutical and personal care products in the environment.

This is the final version. Available from Wiley via the DOI in this record. Antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) are important environmental contaminants. Nonetheless, what drives the evolution, spread, and transmission of antibiotic resistance dissemination is still poorly understood. The abundance of ARB and ARGs is often elevated in human-impacted areas, especially in environments receiving fecal wastes, or in the presence of complex mixtures of chemical contaminants, such as pharmaceuticals and personal care products. Self-replication, mutation, horizontal gene transfer, and adaptation to different environmental conditions contribute to the persistence and proliferation of ARB in habitats under strong anthropogenic influence. Our review discusses the interplay between chemical contaminants and ARB and their respective genes, specifically in reference to co-occurrence, potential biostimulation, and selective pressure effects, and gives an overview of mitigation by existing man-made and natural barriers. Evidence and strategies to improve the assessment of human health risks due to environmental antibiotic resistance are also discussed.Portuguese Foundation for Science and Technology (FCT)European Union's Horizon 202Australian Research CouncilAustralian Research CouncilNatural Environment Research CouncilFCT/Ministry of Science, Technology, and Higher EducationFCT/Ministry of Science, Technology, and Higher EducationFCT/Ministry of Science, Technology, and Higher Educatio

Phylogenetic relationships within Chamaecrista sect. Xerocalyx (Leguminosae, Caesalpinioideae) inferred from the cpDNA trnE-trnT intergenic spacer and nrDNA ITS sequences

Chamaecrista belongs to subtribe Cassiinae (Caesalpinioideae), and it comprises over 330 species, divided into six sections. The section Xerocalyx has been subjected to a profound taxonomic shuffling over the years. Therefore, we conducted a phylogenetic analysis using a cpDNA trnE-trnT intergenic spacer and nrDNA ITS/5.8S sequences from Cassiinae taxa, in an attempt to elucidate the relationships within this section from Chamaecrista. The tree topology was congruent between the two data sets studied in which the monophyly of the genus Chamaecrista was strongly supported. Our analyses reinforce that new sectional boundaries must be defined in the Chamaecrista genus, especially the inclusion of sections Caliciopsis and Xerocalyx in sect. Chamaecrista, considered here paraphyletic. The section Xerocalyx was strongly supported as monophyletic; however, the current data did not show C. ramosa (microphyllous) and C. desvauxii (macrophyllous) and their respective varieties in distinct clades, suggesting that speciation events are still ongoing in these specimens

Performance of the ATLAS muon trigger in pp collisions at [Formula: see text] TeV

The performance of the ATLAS muon trigger system is evaluated with proton-proton collision data collected in 2012 at the Large Hadron Collider at a centre-of-mass energy of 8 TeV. It is primarily evaluated using events containing a pair of muons from the decay of [Formula: see text] bosons. The efficiency of the single-muon trigger is measured for muons with transverse momentum [Formula: see text] GeV, with a statistical uncertainty of less than 0.01 % and a systematic uncertainty of 0.6 %. The [Formula: see text] range for efficiency determination is extended by using muons from decays of [Formula: see text] mesons, [Formula: see text] bosons, and top quarks. The muon trigger shows highly uniform and stable performance. The performance is compared to the prediction of a detailed simulation

Electron reconstruction and identification efficiency measurements with the ATLAS detector using the 2011 LHC proton–proton collision data

Many of the interesting physics processes to be measured at the LHC have a signature involving one or more isolated electrons. The electron reconstruction and identification efficiencies of the ATLAS detector at the LHC have been evaluated using proton–proton collision data collected in 2011 at s√=7 TeV and corresponding to an integrated luminosity of 4.7 fb −1. Tag-and-probe methods using events with leptonic decays of W and Z bosons and J/ψ mesons are employed to benchmark these performance parameters. The combination of all measurements results in identification efficiencies determined with an accuracy at the few per mil level for electron transverse energy greater than 30 GeV