Structural and magnetic properties of a series of low doped Zn1−x_{1-x}Cox_xO thin films deposited from Zn and Co metal targets on (0001) Al2_2O3_3 substrates

We report on the synthesis of low doping Zn$_{1-x}$Co$_x$O ($0<x<0.1$) thin films on (0001)-Al$_2$O$_3$ substrates. The films were prepared in an oxidizing atmosphere, using the pulsed laser deposition technique starting from Zn and Co metallic targets. We first studied the influence of the strains of ZnO and their stuctural properties. Second, we have investigated the structural and the magnetic properties of the Zn$_{1-x}$Co$_x$O films. We show that at low doping, the lattice parameters and the magnetization of the Zn$_{1-x}$Co$_x$O films depend strongly on the Co concentration.Comment: to be published in Journal Applied Physics (June 2004) as a proceeding of the MMM/Intermag Conferenc

An ultra-compact particle size analyser using a CMOS image sensor and machine learning

Light scattering is a fundamental property that can be exploited to create essential devices such as particle analysers. The most common particle size analyser relies on measuring the angle-dependent diffracted light from a sample illuminated by a laser beam. Compared to other non-light-based counterparts, such a laser diffraction scheme offers precision, but it does so at the expense of size, complexity and cost. In this paper, we introduce the concept of a new particle size analyser in a collimated beam configuration using a consumer electronic camera and machine learning. The key novelty is a small form factor angular spatial filter that allows for the collection of light scattered by the particles up to predefined discrete angles. The filter is combined with a light-emitting diode and a complementary metal-oxide-semiconductor image sensor array to acquire angularly resolved scattering images. From these images, a machine learning model predicts the volume median diameter of the particles. To validate the proposed device, glass beads with diameters ranging from 13 to 125 µm were measured in suspension at several concentrations. We were able to correct for multiple scattering effects and predict the particle size with mean absolute percentage errors of 5.09% and 2.5% for the cases without and with concentration as an input parameter, respectively. When only spherical particles were analysed, the former error was significantly reduced (0.72%). Given that it is compact (on the order of ten cm) and built with low-cost consumer electronics, the newly designed particle size analyser has significant potential for use outside a standard laboratory, for example, in online and in-line industrial process monitoring

Hyperferritinemia and hypergammaglobulinemia predict the treatment response to standard therapy in autoimmune hepatitis.

Autoimmune hepatitis (AIH) is a chronic hepatitis with an increasing incidence. The majority of patients require life-long immunosuppression and incomplete treatment response is associated with a disease progression. An abnormal iron homeostasis or hyperferritinemia is associated with worse outcome in other chronic liver diseases and after liver transplantation. We assessed the capacity of baseline parameters including the iron status to predict the treatment response upon standard therapy in 109 patients with untreated AIH type 1 (AIH-1) in a retrospective single center study. Thereby, a hyperferritinemia (> 2.09 times upper limit of normal; Odds ratio (OR) = 8.82; 95% confidence interval (CI): 2.25-34.52) and lower immunoglobulins (<1.89 times upper limit of normal; OR = 6.78; CI: 1.87-24.59) at baseline were independently associated with the achievement of complete biochemical remission upon standard therapy. The predictive value increased when both variables were combined to a single treatment response score, when the cohort was randomly split into a training (area under the curve (AUC) = 0.749; CI 0.635-0.863) and internal validation cohort (AUC = 0.741; CI 0.558-0.924). Patients with a low treatment response score (<1) had significantly higher cumulative remission rates in the training (p<0.001) and the validation cohort (p = 0.024). The baseline hyperferritinemia was accompanied by a high serum iron, elevated transferrin saturations and mild hepatic iron depositions in the majority of patients. However, the abnormal iron status was quickly reversible under therapy. Mechanistically, the iron parameters were not stringently related to a hepatocellular damage. Ferritin rather seems deregulated from the master regulator hepcidin, which was down regulated, potentially mediated by the elevated hepatocyte growth factor. In conclusion, baseline levels of serum ferritin and immunoglobulins, which are part of the diagnostic work-up of AIH, can be used to predict the treatment response upon standard therapy in AIH-1, although confirmation from larger multicenter studies is pending

Scrotal calcinosis due to resorption of cyst walls: a case report

<p>Abstract</p> <p>Introduction</p> <p>Scrotal calcinosis is a rare benign entity defined as the presence of multiple calcified nodules within the scrotal skin. There are controversies about the origin of this entity. In fact, it is still debatable whether scrotal calcinosis is an idiopathic growth or dystrophic calcification of dartoic muscles. It is also unclear whether scrotal calcinosis originates from inflammation of epidermal cysts affected by mild to moderate inflammation of mononuclear cells, from foreign body granuloma formation followed by resorption of cyst walls or from eccrine epithelial cysts.</p> <p>Case presentation</p> <p>We report a 41-year-old male Turkish patient presenting with a 10-year history of scrotal tumours increasing slowly in size and number. Histopathologically, there was no epithelial lining around the calcified nodules, but there was fibrosis adjacent to atrophic stratified squamous epithelium.</p> <p>Conclusion</p> <p>Results of histopathological examinations suggested that scrotal calcinosis might have been due to resorption of cyst walls. Surgery remains the key for this problem. In cases of non-massive scrotal calcinosis, like the case presented here, excision of the nodules from the affected part of the scrotal wall and repairing the defect with horizontal stitches offer good cosmetic results without relapse.</p

The Residual Stress Relaxation Behavior of Weldments During Cyclic Loading

Accurate measurement of residual stress is necessary to obtain reliable predictions of fatigue lifetime and enable estimation of time-to-facture for any given stress level. In this article, relaxation of welding residual stresses as a function of cyclic loading was documented on three common steels: AISI 1008, ASTM A572, and AISI 4142. Welded specimens were subjected to cyclic bending (R = 0.1) at different applied stresses, and the residual stress relaxation existing near the welds was measured as a function of cycles. The steels exhibited very different stress relaxation behaviors during cyclic loadings, which can be related to the differences in the microstructures of the specimens. A phenomenological model, which treats dislocation motion during cyclic loading as being analogous to creep of dislocations, is proposed for estimation of the residual stress relaxation

Whole Exome Sequencing of Patients with Steroid-Resistant Nephrotic Syndrome

BACKGROUND AND OBJECTIVES: Steroid-resistant nephrotic syndrome overwhelmingly progresses to ESRD. More than 30 monogenic genes have been identified to cause steroid-resistant nephrotic syndrome. We previously detected causative mutations using targeted panel sequencing in 30% of patients with steroid-resistant nephrotic syndrome. Panel sequencing has a number of limitations when compared with whole exome sequencing. We employed whole exome sequencing to detect monogenic causes of steroid-resistant nephrotic syndrome in an international cohort of 300 families. DESIGN, SETTING, PARTIIPANTS AND MEASUREMENTS: Three hundred thirty-five individuals with steroid-resistant nephrotic syndrome from 300 families were recruited from April of 1998 to June of 2016. Age of onset was restricted to <25 years of age. Exome data were evaluated for 33 known monogenic steroid-resistant nephrotic syndrome genes. RESULTS: In 74 of 300 families (25%), we identified a causative mutation in one of 20 genes known to cause steroid-resistant nephrotic syndrome. In 11 families (3.7%), we detected a mutation in a gene that causes a phenocopy of steroid-resistant nephrotic syndrome. This is consistent with our previously published identification of mutations using a panel approach. We detected a causative mutation in a known steroid-resistant nephrotic syndrome gene in 38% of consanguineous families and in 13% of nonconsanguineous families, and 48% of children with congenital nephrotic syndrome. A total of 68 different mutations were detected in 20 of 33 steroid-resistant nephrotic syndrome genes. Fifteen of these mutations were novel. NPHS1, PLCE1, NPHS2, and SMARCAL1 were the most common genes in which we detected a mutation. In another 28% of families, we detected mutations in one or more candidate genes for steroid-resistant nephrotic syndrome. CONCLUSIONS: Whole exome sequencing is a sensitive approach toward diagnosis of monogenic causes of steroid-resistant nephrotic syndrome. A molecular genetic diagnosis of steroid-resistant nephrotic syndrome may have important consequences for the management of treatment and kidney transplantation in steroid-resistant nephrotic syndrome

Thermo-Mechanical Treatment Effects on Stress Relaxation and Hydrogen Embrittlement of Cold-Drawn Eutectoid Steels

The effects of the temperature and stretching levels used in the stress-relieving treatment of cold-drawn eutectoid steel wires are evaluated with the aim of improving the stress relaxation behavior and the resistance to hydrogen embrittlement. Five industrial treatments are studied, combining three temperatures (330, 400, and 460 °C) and three stretching levels (38, 50 and 64% of the rupture load). The change of the residual stress produced by the treatments is taken into consideration to account for the results. Surface residual stresses allow us to explain the time to failure in standard hydrogen embrittlement test

Is the ADA/EASD algorithm for the management of type 2 diabetes (January 2009) based on evidence or opinion? A critical analysis

The ADA and the EASD recently published a consensus statement for the medical management of hyperglycaemia in patients with type 2 diabetes. The authors advocate initial treatment with metformin monotherapy and lifestyle modification, followed by addition of basal insulin or a sulfonylurea if glycaemic goals are not met (tier 1 recommendations). All other glucose-lowering therapies are relegated to a secondary (tier 2) status and only recommended for selected clinical settings. In our view, this algorithm does not offer physicians and patients the appropriate selection of options to individualise and optimise care with a view to sustained control of blood glucose and reduction both of diabetes complications and cardiovascular risk. This paper critically assesses the basis of the ADA/EASD algorithm and the resulting tiers of treatment options