178 research outputs found
Contact and Continuity
Wayfinding. Embodied Learning. Craft Culture.
That material can harbour life inspires careful consideration of the craft of building.
Building is the agency of architecture; material—its medium.
The act of building engages the whole body; touch, brings together mind, and material.
Guided by traditions of craft, I learn to work with wood, in order to explore the synergy between thinking and making, body and material, through the act of building a table, with my partner, and a tree-house, for a family in Waterloo, Ontario
THE HIGH FREQUENCY SURFACE WAVE RADAR SOLUTION FOR VESSEL TRACKING BEYOND THE HORIZON
With maximum range of about 200 nautical miles (approx. 370 km) High Frequency Surface Wave Radars (HFSWR) provide unique capability for vessel detection far beyond the horizon without utilization of any moving platforms. Such uniqueness requires design principles unlike those usually used in microwave radar. In this paper the key concepts of HFSWR based on Frequency Modulated Continuous (FMCW) principles are presented. The paper further describes operating principles with focus on signal processing techniques used to extract desired data. The signal processing describes range and Doppler processing but focus is given to the Digital Beamforming (DBF) and Constant False Alarm Rate (CFAR) models. In order to better present the design process, data obtained from the HFSWR sites operating in the Gulf of Guinea are used.
Multi-channel system for remote power quality monitoring of electricity supplied by public distribution networks
Peer Reviewe
Arthroscopic repair of posterosuperior rotator cuff tears with bioabsorbable patch augmentation: a magnetic resonance–controlled case series with 1-year follow-up
Background: Among many advances in the treatment of rotator cuff tears, arthroscopic augmentation techniques with patches of various biological and synthetic graft materials have been introduced to reinforce the repair. However, structural and functional outcomes after patch augmentation vary, and reinforcing the tendon healing remains a challenge. The aim of this study was to evaluate clinical and radiologic outcomes 1 year after arthroscopic posterosuperior (PS) rotator cuff repair with bioabsorbable patch augmentation.
Methods: From October 2014 to December 2017, all patients with PS rotator cuff tears undergoing arthroscopic repair with patch augmentation using a resorbable, biologically derived poly-4-hydroxybutyrate patch (Biofiber; Wright, Memphis, TN, USA) were enrolled in this study. Only full-thickness PS lesions with ≥1 of the following tear patterns were augmented with a patch and were the subject of this study: large U- and L-shaped tear, transtendinous tear, delamination, and fraying of the bursal layer. Patients were examined preoperatively and at 1 year postoperatively with a standardized examination protocol and magnetic resonance imaging (MRI).
Results: Sixteen patients were included in this study; 1 patient was lost to follow-up. One patient only underwent clinical follow-up. We detected 1 repair failure (6.7%) with dislocation of the lateral-row anchors on computed tomography scanning at 3 months postoperatively. MRI was performed in 14 patients after 1 year; in all of them, the cuff repair was intact. The Sugaya tendon integrity score was 1.7 ± 0.9. The Constant-Murley score improved from 44 to 89 points (P < .001). Muscular strength improved in the supraspinatus (from 2.6 to 4.8), infraspinatus (from 3.2 to 4.9), and subscapularis (from 4 to 4.9) (all P < .001). Overall, patient satisfaction was high (3.6 ± 0.6).
Discussion: This small-sized case series is the first to prospectively assess clinical and radiologic outcomes after patch augmentation of PS rotator cuff tears using bioabsorbable poly-4-hydroxybutyrate patches. Good to excellent structural and functional outcomes were observed with a low retear rate (6.7%) and good tendon integrity on 1-year postoperative MRI, and the graft did not cause any complications. The use of bioabsorbable patches could be beneficial when unfavorable PS tear patterns are encountered in which a stable repair of the full tendon thickness at its insertion is otherwise difficult to reach
Chemical composition and cholesterol content in M. longissimus dorsi from free-range reared Swallow-belly Mangalitsa: the effect of gender
The objective of this study was to determine chemical composition and cholesterol content in M. longissimus dorsi (MLD) of Swallow-belly Mangalitsa, free-range reared, and to investigate possible effects of gender on these quality parameters of its meat. Average moisture and fat contents were significantly different in male and female pig muscles. The differences in average values of ash, protein and cholesterol contents between the two groups (genders) of meat samples were not significant. In MLD samples of female pigs, total fat had a significant influence on cholesterol content, while this influence was not established in MLD of male pigs. (C) 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license
Amplatzer оклузија на паравалвуларен leak на механичка протеза по реоперација на дехисценција на митрална механичка протеза- Приказ на случај
Во трудот се опишува случајот на 46-годишна жена со парававуларното протекување или leak по второ заменување на митрална механичка протеза, кој е успешно третиран со Amplatzer оклузија на паравалвуларниот leak
Nanostructured Fe2O3/TiO2 thick films prepared by screen printing
Nanostructured single layered (pure TiO2 , pure α-Fe2O3 and mixed Fe2O3 /TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen printing technology on a glass substrate. The pastes used for film preparation were obtained by adding an organic vehicle to the oxide powders together with a small percentage of binding glass frit. Samples were dried up to 100 °C and sintered at 650 °C/60 minutes. Structural, morphological and optical studies have been carried out using XRD, SEM analyses and UV/Vis spectroscopy. The prepared pure and mixed Fe2O3 /TiO2 thick films had a homogenous nanostructure without secondary phases. Indirect band gaps were determined from the measured transmission spectra and the obtained values are in the range of literature data. [Projekat Ministarstva nauke Republike Srbije, br. III45007
Nanostructured Fe2O3/TiO2 thick films
Thick films of nanostructured pure TiO2, -Fe2O3, Fe2O3/TiO2 (ratio 2:3 and 3:2) and a hetero-junction in the form of a TiO2 layer over a Fe2O3 layer have been fabricated by screen printing technology on a glass substrate. The pastes used for film preparation were obtained by adding an organic vehicle to the oxide powders together with a small percentage of binding glass frit. Samples were dried up to 100oC and sintered at 650oC/60 minutes. Structural, morphological and optical studies have been carried out using XRD, SEM, EDS analysis and UV/Vis spectroscopy. Fe2O3/TiO2 thick films had a homogenous nanostructure and no new compounds were formed. Indirect band gaps were determined from the measured transmission spectra
Performance of RC frames in 26.11.2019. Albania earthquake: effects of irregularities and detailing
The collapse and damage of large number of buildings during the November 26,
2019 (Mw 6,4) Albania earthquake caused 51 fatalities and injuries to at least 910
people. Most of collapsed or heavily damaged buildings were RC frame buildings.
Although RC frame system is considered as very ductile seismic force-resisting
system, its behaviour during earthquake highly depends on: (1) regularity in plan
and elevation, and (2) global and local ductility. Based on the authors’ visit to the
earthquake-affected area on behalf of the Serbian Association of Earthquake
Engineering and observations of collapsed and damaged buildings, it was
concluded that among main reasons for underperformance of these flexible systems
were inadequate analysis of interaction between infill walls and RC frames and
reinforcement detailing of RC member
- …