375 research outputs found
Low cost on-line non-invasive sewer flow monitoring
A novel acoustic sensor has been developed, capable of remotely monitoring the free surface 'fingerprint' of shallow flows. Temporal and spatial properties of this pattern are shown to contain information regarding the nature of the flow itself. The remote measurement can thereby be used to infer the bulk flow properties such as depth, velocity, and the hydraulic roughness of the pipe. The instrument is non-invasive and is also low cost, low maintenance, and low power. Such a device will allow for widespread monitoring of flow conditions in drainage networks, enabling pro-active maintenance and reliable real-time control. © IWA Publishing 2013
Free-surface behaviour of shallow turbulent flows
Over the last two decades, interest in the free surface behaviour of gravity-driven shallow turbulent flows has increased considerably. It is believed that observation of free surface behaviour can provide
useful information about the hydrodynamic characteristics of the flow and enable remote retrieval of these characteristics to non-invasively and rapidly monitor river flows. At the current state literature presents scattered knowledge and also exhibits non-uniformity in the terminology used. This paper is a review of the state-of-art of this area of research and was created with two objectives: to gather the information relevant to understand the linkages between the free surface behaviour and underpinning hydrodynamic processes while using a uniform terminology, and to analyse the gaps in our knowledge of this critical topic
Numerical Study of High-Temperature Jet Flow Using RANS/LES and PANS Formulations
Two multi-scale-type turbulence models are implemented in the PAB3D solver. The models are based on modifying the Reynolds Averaged Navier-Stokes (RANS) equations. The first scheme is a hybrid RANS/LES model utilizing the two-equation (k(epsilon)) model with a RANS/LES transition function dependent on grid spacing and the computed turbulence length scale. The second scheme is a modified version of the Partially Averaged Navier-Stokes (PANS) model, where the unresolved kinetic energy parameter (f(sub k)) is allowed to vary as a function of grid spacing and the turbulence length scale. This parameter is estimated based on a novel two-stage procedure to efficiently estimate the level of scale resolution possible for a given flow on a given grid for Partial Averaged Navier-Stokes (PANS). It has been found that the prescribed scale resolution can play a major role in obtaining accurate flow solutions. The parameter f(sub k) varies between zero and one and equal to one in the viscous sub layer, and when the RANS turbulent viscosity becomes smaller than the LES viscosity. The formulation, usage methodology, and validation examples are presented to demonstrate the enhancement of PAB3D's time-accurate and turbulence modeling capabilities. The accurate simulations of flow and turbulent quantities will provide valuable tool for accurate jet noise predictions. Solutions from these models are compared to RANS results and experimental data for high-temperature jet flows. The current results show promise for the capability of hybrid RANS/LES and PANS in simulating such flow phenomena
Augmented Reality in Astrophysics
Augmented Reality consists of merging live images with virtual layers of
information. The rapid growth in the popularity of smartphones and tablets over
recent years has provided a large base of potential users of Augmented Reality
technology, and virtual layers of information can now be attached to a wide
variety of physical objects. In this article, we explore the potential of
Augmented Reality for astrophysical research with two distinct experiments: (1)
Augmented Posters and (2) Augmented Articles. We demonstrate that the emerging
technology of Augmented Reality can already be used and implemented without
expert knowledge using currently available apps. Our experiments highlight the
potential of Augmented Reality to improve the communication of scientific
results in the field of astrophysics. We also present feedback gathered from
the Australian astrophysics community that reveals evidence of some interest in
this technology by astronomers who experimented with Augmented Posters. In
addition, we discuss possible future trends for Augmented Reality applications
in astrophysics, and explore the current limitations associated with the
technology. This Augmented Article, the first of its kind, is designed to allow
the reader to directly experiment with this technology.Comment: 15 pages, 11 figures. Accepted for publication in Ap&SS. The final
publication will be available at link.springer.co
A Gravitational Aharonov-Bohm Effect, and its Connection to Parametric Oscillators and Gravitational Radiation
A thought experiment is proposed to demonstrate the existence of a
gravitational, vector Aharonov-Bohm effect. A connection is made between the
gravitational, vector Aharonov-Bohm effect and the principle of local gauge
invariance for nonrelativistic quantum matter interacting with weak
gravitational fields. The compensating vector fields that are necessitated by
this local gauge principle are shown to be incorporated by the DeWitt minimal
coupling rule. The nonrelativistic Hamiltonian for weak, time-independent
fields interacting with quantum matter is then extended to time-dependent
fields, and applied to problem of the interaction of radiation with
macroscopically coherent quantum systems, including the problem of
gravitational radiation interacting with superconductors. But first we examine
the interaction of EM radiation with superconductors in a parametric oscillator
consisting of a superconducting wire placed at the center of a high Q
superconducting cavity driven by pump microwaves. We find that the threshold
for parametric oscillation for EM microwave generation is much lower for the
separated configuration than the unseparated one, which then leads to an
observable dynamical Casimir effect. We speculate that a separated parametric
oscillator for generating coherent GR microwaves could also be built.Comment: 25 pages, 5 figures, YA80 conference (Chapman University, 2012
Temporal evolution of shallow marine diagenetic environments:Insights from carbonate concretions
Early diagenesis of marine organic matter dramatically impacts Earth’s surface chemistry by changing the burial potential of carbon and promoting the formation of authigenic mineral phases including carbonate concretions. Marine sediment-hosted carbonate concretions tend to form as a result of microbial anaerobic diagenetic reactions that degrade organic matter and methane, some of which require an external oxidant. Thus, temporal changes in the oxidation state of Earth’s oceans may impart a first-order control on concretion authigenesis mechanisms through time. Statistically significant variability in concretion carbonate carbon isotope compositions indicates changes in shallow marine sediment diagenesis associated with Earth’s evolving redox landscape. This variability manifests itself as an expansion in carbon isotope composition range broadly characterized by an increase in maximum and decrease in minimum isotope values through time. Reaction transport modelling helps to constrain the potential impacts of shifting redox chemistry and highlights the importance of organic carbon delivery to the seafloor, marine sulfate concentrations, methane production and external methane influx. The first appearance of conclusively anaerobic oxidation of methane-derived concretions occurs in the Carboniferous and coincides with a Paleozoic rise in marine sulfate. The muted variability recognized in older concretions (and in particular for Precambrian concretions) likely reflects impacts of a smaller marine sulfate reservoir and perhaps elevated marine dissolved inorganic carbon concentrations. Causes of the increase in carbon isotope maximum values through time are more confounding, but may be related to isotopic equilibration of dissolved inorganic carbon with externally derived methane. Ultimately the concretion isotope record in part reflects changes in organic matter availability and marine oxidation state, highlighting connections with the subsurface biosphere and diagenesis throughout geologic time
[Accepted Manuscript] Comparison of Propensity Score Methods and Covariate Adjustment: Evaluation in 4 Cardiovascular Studies.
Propensity scores (PS) are an increasingly popular method to adjust for confounding in observational studies. Propensity score methods have theoretical advantages over conventional covariate adjustment, but their relative performance in real-word scenarios is poorly characterized. We used datasets from 4 large-scale cardiovascular observational studies (PROMETHEUS, ADAPT-DES [the Assessment of Dual AntiPlatelet Therapy with Drug-Eluting Stents], THIN [The Health Improvement Network], and CHARM [Candesartan in Heart Failure-Assessment of Reduction in Mortality and Morbidity]) to compare the performance of conventional covariate adjustment with 4 common PS methods: matching, stratification, inverse probability weighting, and use of PS as a covariate. We found that stratification performed poorly with few outcome events, and inverse probability weighting gave imprecise estimates of treatment effect and undue influence to a small number of observations when substantial confounding was present. Covariate adjustment and matching performed well in all of our examples, although matching tended to give less precise estimates in some cases. PS methods are not necessarily superior to conventional covariate adjustment, and care should be taken to select the most suitable method
Conductance behavior of tetraphenyl-Aza-Bodipys
We studied the electrical conductance of single-molecule junctions formed from molecular wires with four anchor groups. Three tetraphenyl-aza-BODIPYs with four or two thiomethyl anchor groups were synthesized, and their single-molecule conductance was measured using break-junction-STM. Using DFT based calculations these compounds were shown to display a combination of a high and low conductance, depending on the molecule's connectivity in the junction. A scissor correction is employed to obtain the corrected HOMO-LUMO gaps and a tight binding model (TBM) is used to highlight the role of transport through the pi system of the tetraphenyl-aza-BODIPY central unit. The three higher-conductance geometries follow the sequence 3 > 4 > 2, which demonstrates that their conductances are correlated with the number of anchors
Immersed boundary-finite element model of fluid-structure interaction in the aortic root
It has long been recognized that aortic root elasticity helps to ensure
efficient aortic valve closure, but our understanding of the functional
importance of the elasticity and geometry of the aortic root continues to
evolve as increasingly detailed in vivo imaging data become available. Herein,
we describe fluid-structure interaction models of the aortic root, including
the aortic valve leaflets, the sinuses of Valsalva, the aortic annulus, and the
sinotubular junction, that employ a version of Peskin's immersed boundary (IB)
method with a finite element (FE) description of the structural elasticity. We
develop both an idealized model of the root with three-fold symmetry of the
aortic sinuses and valve leaflets, and a more realistic model that accounts for
the differences in the sizes of the left, right, and noncoronary sinuses and
corresponding valve cusps. As in earlier work, we use fiber-based models of the
valve leaflets, but this study extends earlier IB models of the aortic root by
employing incompressible hyperelastic models of the mechanics of the sinuses
and ascending aorta using a constitutive law fit to experimental data from
human aortic root tissue. In vivo pressure loading is accounted for by a
backwards displacement method that determines the unloaded configurations of
the root models. Our models yield realistic cardiac output at physiological
pressures, with low transvalvular pressure differences during forward flow,
minimal regurgitation during valve closure, and realistic pressure loads when
the valve is closed during diastole. Further, results from high-resolution
computations demonstrate that IB models of the aortic valve are able to produce
essentially grid-converged dynamics at practical grid spacings for the
high-Reynolds number flows of the aortic root
Cost-effectiveness of adoption strategies for point of care HIV viral load monitoring in South Africa
Background: Viral load (VL) testing is recommended for monitoring people on ART. The National Health Laboratory Service (NHLS) in South Africa conducts >5million laboratory-based VL tests but faces challenges with specimen integrity and results delivery. Point-of-care (POC) VL monitoring may improve VL suppression (VLS). We assessed the cost-effectiveness of different strategies for POC testing in South Africa. Methods: We developed a cost-outcome model utilizing NHLS data, including facility-level annual VL volumes, proportion with VLS, specimen rejection rates, turn-around-time, and the cost/test. We assessed the impact of adopting POC VL technology under 4 strategies: (1) status-quo; (2) targeted POC testing at facilities with high levels of viral failure; (3) targeted POC testing at low-performing facilities; (4) complete POC adoption. For each strategy, we determined the total cost, effectiveness (expected number of virally suppressed people) and incremental cost-effectiveness ratio (ICER) based on expected (>10%) VLS improvement. Findings: Existing laboratory-based VL testing costs 40/additional person suppressed, compared to the status-quo. Should resources allow, complete POC adoption may be cost-effective (ICER: 49 m annually and achieving 94.5% VLS. All other strategies were dominated in the incremental analysis. Interpretation: Assuming POC VL monitoring confers clinical benefits, the most cost-effective strategy for POC adoption in South Africa is a targeted approach with POC VL technologies placed at facilities with high level of viral failure. Funding: Funding support from the Bill & Melinda Gates Foundation
- …