Analytical prediction of part dynamics for machining stability analysis

An analytical procedure is developed to predict workpiece dynamics in a complete machining cycle in order to obtain frequency response functions (FRF) which are needed in chatter stability analyses. For this purpose, a structural modification method which is an efficient tool for updating FRFs is used. The removed mass by machining is considered as a structural modification in order to determine the FRFs at different stages of the process. The method is implemented in a computer code and demonstrated on different geometries. The predictions are compared and verified by FEA. Predicted FRFs are used in chatter stability analyses, and the effect of part dynamics on stability is studied. Different cutting strategies are compared for increased chatter free material removal rates considering part dynamics

Selection of design and operational parameters in spindle-holder-tool assemblies for maximum chatter stability by using a new analytical model

In this paper, using the analytical model developed by the authors, the effects of certain system design and operational parameters on the tool point FRF, thus on the chatter stability are studied. Important conclusions are derived regarding the selection of the system parameters at the stage of machine tool design and during a practical application in order to increase chatter stability. It is demonstrated that the stability diagram for an application can be modified in a predictable manner in order to maximize the chatter-free material removal rate by selecting favorable system parameters using the analytical model developed. The predictions of the model, which are based on the methodology proposed in this study, are also experimentally verified

Investigating dynamics of machine tool spindles under operational conditions

Chatter is one of the major problems in machining and can be avoided by stability diagrams which are generated using frequency response functions (FRF) at the tool tip. During cutting operations, discrepancies between the stability diagrams obtained by using FRFs measured at the idle state and the actual stability of the process are frequently observed. These deviations can be attributed to the changes of machine dynamics under cutting conditions. In this paper, the effects of the cutting process on the spindle dynamics are investigated both experimentally and analytically. The variations in the spindle dynamics are attributed to the changes in the bearing parameters. FRFs under cutting conditions are obtained through the input-output relations of the cutting forces and the vibration response which are measured simultaneously. Experimentally and analytically obtained FRFs are then used in the identification of the bearing parameters under cutting conditions. Thus, bearing properties obtained at idle and cutting conditions are compared and variations in their values are obtained

Hasan-Ali Yücel'in ardından

Taha Toros Arşivi, Dosya No: 109-Hasan Ali-Can Yüce

Gül Baba ve Karagöz

Taha Toros Arşivi, Dosya No: 176-Karagöz Sanatkarlarıİstanbul Kalkınma Ajansı (TR10/14/YEN/0033) İstanbul Development Agency (TR10/14/YEN/0033

Vakıflarda Vergi Uygulaması

[No Abstract Available