Solid + liquid equilibria and molecular structure studies of binary mixtures for nitrate ester's stabilizers: Measurement and modeling

Solid-liquid equilibria (SLE) data for two binary organic mixtures of N-(2-methoxyethyl)-p-nitroaniline+Nethyl- 4-nitroaniline (S1) and N-(2-ethanol)-p-nitroaniline+N-ethyl-4-nitroaniline (S2) have been measured using differential scanning calorimeter to build the corresponding solid-liquid phase diagrams. The quality of the SLE data has been checked by consistency tests, presenting good quality factors for both systems. Simple eutectic behavior has been observed for these systems with the presence of a solid-solid transition for S2. The SLE data have been correlated by means of Wilson, NRTL, and UNIQUAC equations. The used models calculate the equilibrium temperatures very satisfactorily. The best modeling results were obtained using the Wilson equation with a root mean square deviation between experimental and calculated values for S1 and S2 of 1.15 and 1.99, respectively. The Wilson, NRTL, and UNIQUAC equations have also been used to compute excess thermodynamic functions viz. excess Gibbs energy, enthalpy, and entropy. The obtained results demonstrated a moderate positive deviation to ideality for S1, and a strong positive deviation for S2, unveiling the nature of the interactions between the compounds forming each mixture. In addition, microstructural studies have been carried out by FTIR, XRD and optical microscopy. Weak molecular interactions have been shown for the eutectic compositions. Jackson’s roughness parameter was calculated and found to be greater than 2, suggesting the faceted morphology with irregular structures.The authors are grateful for the financial support of this research from Ecole Militaire Polytechnique (Doctoral Training Program) and from Associate Laboratory LSRE-LCM, Instituto Politécnico de Bragança (projectPOCI-01-0145-FEDER-006984) funded by European Regional Development Fund (ERDF) through COMPETE2020 –Programa Operacional Competitividade e Internacionalização (POCI) – and by national funds through FCT - Fundaçãopara a Ciência e a Tecnologia. C.M.S.S. Neves thanks FCT for the postdoctoral grant SFRH/BPD/ 109057/2015.info:eu-repo/semantics/publishedVersio

Sustainable hydrophobic terpene-based eutectic solvents for the extraction and separation of metals

Sustainable hydrophobic eutectic solvents, composed of low-priced and biodegradable terpenes and fatty acids, were used for the extraction and separation of Cu(ii) from other transition metals in mildly acidic solutions. Multiple parameters were evaluated for metal extraction and the hydrophobic eutectic solvent was successfully recovered and reused.This work was part of BATRE-ARES project (ERA-MIN/0001/2015) funded by ADEME and FCT and partly developed in the scope of the project CICECO – Aveiro Institute of Materials, POCI-01-0145-FEDER-007679 (FCT Ref. UID/CTM/50011/2013). C. M. S. S. Neves acknowledges FCT for the postdoctoral grant (SFRH/BPD/109057/2015). M. A. R. Martins acknowledges financial support from NORTE 2020 (NORTE-01-0145-FEDER- 000006) and DeepBiorefinery (PTDC/AGRTEC/1191/2014) projects.info:eu-repo/semantics/publishedVersio

Critical aspects of membrane-free aqueous battery based on two immiscible neutral electrolytes

Redox Flow Batteries (RFB) stand out as a promising energy storage technology to mitigate the irregular energy generation from renewable sources. However, some hurdles limit their massive implementation including high cost of vanadium and the poor-performance of ion-selective membranes. Recently, we presented a revolutionary Membrane-Free Battery based on organic aqueous/nonaqueous immiscible electrolytes that eludes both separators and vanadium compounds. Here, we demonstrate the feasible application of this archetype in Aqueous Biphasic Systems (ABS) acting as an unprecedented Total Aqueous Membrane-Free Battery. After evaluating several organic molecules, methylviologen (MV) and 2,2,6,6-Tetramethyl-1-piperidinyloxy (TEMPO) were selected as active species due to their optimum electrochemical behavior and selective partitioning between the phases. When connected electrically, this redox-active ABS becomes a Membrane-Free Battery with an open circuit voltage (OCV) of 1.23 V, high peak power density (23 mWcm−2) and excellent long-cycling performance (99.99% capacity retention over 550 cycles). Moreover, essential aspects of this technology such as the crossover, controlled here by partition coefficients, and the inherent self-discharge phenomena were addressed for the first time. These results point out the potential of this pioneering Total Aqueous Membrane-Free Battery as a new energy storage technology.publishe

Measurement and PC-SAFT modeling of solid-liquid equilibrium of deep eutectic solvents of quaternary ammonium chlorides and carboxylic acids

In this study the solid-liquid equilibria (SLE) of 15 binary mixtures composed of one of three different symmetrical quaternary ammonium chlorides and one of five different fatty acids were measured. The experimental data obtained showed extreme negative deviations to ideality causing large melting-temperature depressions (up to 300 K) that are characteristic for deep eutectic systems. The experimental data revealed that cross-interactions between quaternary ammonium salt and fatty acid increase with increasing alkyl chain length of the quaternary ammonium chloride and with increasing chain length of the carboxylic acid. The pronounced decrease of melting temperatures in these deep eutectic systems is mainly caused by strong hydrogen-bonding interactions, and thermodynamic modeling required an approach that takes hydrogen bonding into account. Thus, the measured phase diagrams were modeled with perturbed-chain statistical associating fluid theory based on the classical molecular homonuclear approach. The model showed very good agreement with the experimental data using a semi-predictive modeling approach, in which binary interaction parameters between quaternary ammonium chloride and carboxylic acid correlated with chain length of the components. This supports the experimental findings on the phase behavior and interactions present in these systems and it allows estimating eutectic points of such highly non-ideal mixtures.This work was developed in the scope of the project CICECO e Aveiro Institute of Materials, POCI-01-0145-FEDER-007679 (Ref. FCT UID/CTM/50011/2013) and LSRE-LCM, POCI-01-0145- FEDER-006984jUID/EQU/50020/2013, financed by national funds through the FCT/MEC and when appropriate co-financed by FEDER under the PT2020 Partnership Agreement. M.A.R.M acknowledges FCT for her PhD grant (SFRH/BD/87084/2012). FCT is also acknowledged for funding the project DeepBiorefinery (PTDC/AGRTEC/ 1191/2014). P.V.A.P., G.J.M., M.D.H. and E.A.C.B thank the national funding agencies CNPq (National Council for Scientific and Technological Development) (305870/2014-9, 309780/2014, 406856/2013-3), FAPESP (Research Support Foundation of the State of S~ao Paulo) (2014/21252-0, 2016/08566-1), FAEPEX/UNICAMP (Fund for Research, Teaching, and Extension) (0125/16) and CAPES (Coordination of Improvement of Higher Level Personnel) for financial support and scholarships. E.A.C thanks Erasmusþ program of the European Union for co-funding.info:eu-repo/semantics/publishedVersio

Computer-aided design of membrane-free batteries using conductor-like screening model for real solvents

The use of renewable energy sources for electricity generation is increasing, and effective energy storage solutions are needed to manage the mismatch between energy production and demand. Redox Flow Batteries (RFBs), particularly Membrane-Free Flow Batteries based on Aqueous Biphasic Systems (ABSs), are a promising technology for stationary energy storage. However, to prevent the crossover of species, the redox-active compounds used in the catholyte and anolyte must be selectively dissolved, which is currently achieved using expensive physical barriers. In this study, an approach was developed to predict the partition coefficient of redox-active compounds in ABSs formed by ionic liquids or polymers, salt, and water using the Conductor-like Screening Model for Real Solvents (COSMO-RS). Experimental data from literature was used to validate the model, resulting in a good correspondence between predicted and experimental data. Furthermore, the method was used to design viologen derivatives and predict their partition coefficients, nine of which were synthesized and validated experimentally. It was found that derivatives containing amine groups have the highest partition coefficients to the salt-rich phase. COSMO-RS proved to be a powerful tool to accelerate the development of advanced biphasic membrane-free flow batteries by designing and finding combinations of redox species with suitable partition coefficients

Analysis of the isomerism effect on the mutual solubilities of bis(trifluoromethylsulfonyl)imide-based ionic liquids with water

The knowledge of the liquid-liquid equilibria (LLE) between ionic liquids (ILs) and water is of utmost importance for environmental monitoring, process design and optimization. Therefore, in this work, the mutual solubilities with water, for the ILs combining the 1-methylimidazolium, [C(1)im](+); 1-ethylimidazolium, [C(2)im](+); 1-ethyl-3-propylimidazolium, [C(2)C(3)im](+); and 1-butyl-2,3-dimethylimidazolium, [C(4)C(1)C(1)im](+) cations with the bis(trifluoromethylsulfonyl)imide anion, were determined and compared with the isomers of the symmetric 1,3-dialkylimidazolium bis(trifluoromethylsulfonyl)imide ([C(n)C(n)im][NTf2], with n=1-3) and of the asymmetric 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C(n)C(1)im][NTf2], with n = 2-5) series of ILs. The results obtained provide a broad picture of the impact of the IL cation structural isomerism, including the number of alkyl side chains at the cation, on the water-IL mutual solubilities. Despite the hydrophobic behaviour associated to the [NTf2](-) anion, the results show a significant solubility of water in the IL-rich phase, while the solubility of ILs in the water-rich phase is much lower. The thermodynamic properties of solution indicate that the solubility of ILs in water is entropically driven and highly influenced by the cation size. Using the results obtained here in addition to literature data, a correlation between the solubility of [NTf2]-based ILs in water and their molar volume, for a large range of cations, is proposed. The COnductor like Screening MOdel for Real Solvents (COSMO-RS) was also used to estimate the LLE of the investigated systems and proved to be a useful predictive tool for the a priori screening of ILs aiming at finding suitable candidates before extensive experimental measurements.AcknowledgementsThe authors thank financial support from Fundacão para aCiência e a Tecnologia (FCT, Portugal), European Union, QREN,FEDER and COMPETE for funding the CICECO (project PEST-C/CTM/LA0011/2013), and LSRE/LCM (project PEST-C/EQB/LA0020/2013).Thanks are also due to FCT for financial support for the Ph.D. andpostdoctoral grants SFRH/BD/87084/2012, SFRH/BD/70641/2010,SFRH/BPD/88101/2012 for M.A.R.M., C.M.S.S.N., and K.A.K., respec-tively. S.P.P. also thanks FAPESB (APR0035/2014) for funding

Densities, viscosities and derived thermophysical properties of water-saturated imidazolium-based ionic liquids

In order to evaluate the impact of the alkyl side chain length and symmetry of the cation on the thermophysical properties of water-saturated ionic liquids (ILs), densities and viscosities as a function of temperature were measured at atmospheric pressure and in the (298.15 to 363.15) K temperature range, for systems containing two series of bis(trifluoromethylsulfonyl)imide-based compounds: the symmetric [C n C n im][NTf2] (with n = 1-8 and 10) and asymmetric [C n C1im][NTf2] (with n = 2-5, 7, 9 and 11) ILs. For water-saturated ILs, the density decreases with the increase of the alkyl side chain length while the viscosity increases with the size of the aliphatic tails. The saturation water solubility in each IL was further estimated with a reasonable agreement based on the densities of water-saturated ILs, further confirming that for the ILs investigated the volumetric mixing properties of ILs and water follow a near ideal behaviour. The water-saturated symmetric ILs generally present lower densities and viscosities than their asymmetric counterparts. From the experimental data, the isobaric thermal expansion coefficient and energy barrier were also estimated. A close correlation between the difference in the energy barrier values between the water-saturated and pure ILs and the water content in each IL was found, supporting that the decrease in the viscosity of ILs in presence of water is directly related with the decrease of the energy barrier.This work was developed in the scope of the projects CICECOAveiro Institute of Materials (Ref. FCT UID/CTM/50011/2013) and LSRE/LCM-Laboratory of Separation and Reaction Engineering (Ref. FCT UID/EQU/50020/2013), financed by national funds through the FCT/MEC and when applicable co-financed by FEDER under the PT2020 Partnership Agreement. The authors also thank FCT for th

Enhancing the adsorption of ionic liquids onto activated carbon by the addition of inorganic salts

Most ionic liquids (ILs) are either water soluble or present a non-negligible miscibility with water that may cause some harmful effects upon their release into the environment. Among other methods, adsorption of ILs onto activated carbon (AC) has shown to be an effective technique to remove these compounds from aqueous solutions. However, this method has proved to be viable only for hydrophobic ILs rather than for the hydrophilic that, being water soluble, have a larger tendency for contamination. In this context, an alternative approach using the salting-out ability of inorganic salts is here proposed to enhance the adsorption of hydrophilic ILs onto activated carbon. The effect of the concentrations of Na2SO4 on the adsorption of five ILs onto AC was investigated. A wide range of ILs that allow the inspection of the IL cation family (imidazolium- and pyridinium-based) and the anion nature (accounting for its hydrophilicity and fluorination) through the adsorption onto AC was studied. In general, it is shown that the use of Na2SO4 enhances the adsorption of ILs onto AC. In particular, this effect is highly relevant when dealing with hydrophilic ILs that are those that are actually poorly removed by AC. Furthermore, the COnductor like Screening MOdel for Real Solvents (COSMO-RS) was used aiming at complementing the experimental data obtained. This work contributes with the development of novel methods to remove ILs from water streams aiming at creating \"greener\" processes. (C) 2014 Elsevier B.V. All rights reserved

Densities, viscosities and derived thermophysical properties of water-saturated imidazolium-based ionic liquids

In order to evaluate the impact of the alkyl side chain length and symmetry of the cation on the thermophysical properties of water-saturated ionic liquids (ILs), densities and viscosities as a function of temperature were measured at atmospheric pressure and in the (298.15-363.15) K temperature range, for systems containing two series of bis(trifluoromethylsulfonyl)imide-based compounds: the symmetric [C(n)C(n)im][NTf2] (with n = 1-8 and 10) and asymmetric [C(n)C(1)im][NTf2] (with n= 2-5, 7, 9 and 11) ILs. For water-saturated ILs, the density decreases with the increase of the alkyl side chain length while the viscosity increases with the size of the aliphatic tails. The saturation water solubility in each IL was further estimated with a reasonable agreement based on the densities of water-saturated ILs, further confirming that, for the ILs investigated, the volumetric mixing properties of ILs and water follow a near ideal behavior. The water-saturated symmetric ILs generally present lower densities and viscosities than their asymmetric counterparts. From the experimental data, the isobaric thermal expansion coefficient and energy barrier were also estimated. A close correlation between the difference in the energy barrier values between the water-saturated and pure ILs and the water content in each IL was found, supporting that the decrease in the viscosity of ILs in presence of water is directly related with the decrease of the energy barrier. (C) 2015 Elsevier B.V. All rights reserved

Comprehensive study on the impact of the cation alkyl side chain length on the solubility of water in ionic liquids

A comprehensive study on the phase behaviour of two sets of ionic liquids (ILs) and their interactions with water is here presented through combining experimental and theoretical approaches. The impact of the alkyl side chain length and the cation symmetry on the water solubility in the asymmetric [C-N (-) (1)C(1)im][NTf2] and symmetric [C-N (-) (1)C(1)im][NTf2] series of Rs (N up to 22), from 288.15 K to 318.15 K and at atmospheric pressure, was studied. The experimental data reveal that the solubility of water in ILs with an asymmetric cation is higher than in those with the symmetric isomer. Several trend shifts on the water solubility as a function of the alkyl side chain length were identified, namely at [C(6)C(1)im][NTf2] for asymmetric ILs and at [C(4)C(4)im][NTf2] and [C(7)C(7)im]INTf2] for the symmetric ILs. To complement the experimental data and to further investigate the molecular-level mechanisms behind the dissolution process, density functional theory calculations, using the Conductor-like Screening Model for Real Solvents (COSMO-RS) and the electrostatic potential-derived CHelpG, were performed. The COSMO-RS model is able to qualitatively predict water solubility as a function of temperature and alkyl chain lengths of both symmetric and asymmetric cations. Furthermore, the model is also capable to predict the somewhat higher water solubility in the asymmetric cation, as well as the trend shift as a function of alkyl chain lengths experimentally observed. Both COSMO-RS and the electrostatic potential-derived CHelpG show that the interactions of water and the IL cation take place on the IL polar region, namely on the aromatic head and adjacent methylene groups that explains the differences in water solubility observed for cations with different chain lengths. Furthermore, the CHelpG calculations for the isolated cations in the gas phase indicates that the trend shift of water solubility as a function of alkyl chain lengths and the difference of water solubility in symmetric may also result from the partial positive charge distribution/contribution of the cation. (C) 2015 Elsevier B.V. All rights reserved