IODP Expeditions 309 and 312 drill an intact section of upper oceanic basement into gabbros

The Integrated Ocean Drilling Program's (IODP) Expeditions 309 and 312 successfully completed the first sampling of an intact section of upper oceanic crust, through lavas and the sheeted dikes into the uppermost gabbros. Hole 1256D, which was initiated on the Ocean Drilling Program's (ODP) Leg 206, now penetrates to >1500 mbsf and >1250 m sub-basement. The first gabbroic rocks were encountered at 1407 mbsf. Below this, the hole penetrates 3c100 m into a complex zone of fractionated gabbros intruded into contact metamorphosed dikes

Active ocean-continent transform margins: seismic investigation of the Cayman Trough-Swan Island ridge-transform intersection

The southern boundary of the Cayman Trough in theCaribbean is marked by the Swan Islands transform fault (SITF), which also represents the ocean-continent transition of the Honduras continental margin. This is one of the few places globally where a transform continental margin is currently active. The CAYSEIS experiment acquired an ~165 kmlong seismic refraction and gravity profile (P01) running across this transform margin, and along the ridge-axis of the Mid-Cayman Spreading Centre (MCSC) to the north. This profile reveals not only the crustal structure of an actively evolving transform continental margin, that juxtaposes Mesozoic-age continental crust to the south against zero-age ultraslow spread oceanic crust to the north, but also the nature of the crust and uppermost mantle beneath the ridge-transform intersection. The travel times of arrivals recorded by ocean-bottom seismographs (OBSs) deployed along-profile have been inverse and forward modelled, in combination with gravity modelling, to reveal an ~25 km-thick continental crust that has been continuously thinned over a distance of ~65 km to ~10 km adjacent to the SITF, where it is juxtaposed against ~3-4 km-thick oceanic crust. This thinning is primarily accommodated within the lower crust. Since Moho reflections are only sparsely observed, and, even then, only by a few OBSs located on the continental margin, the 7.5 km s -1 velocity contour is used as a proxy to locate the crust-mantle boundary alongprofile. Along the MCSC, the crust-mantle boundary appears to be a transition zone, at least at the seismic wavelengths used for CAYSEIS data acquisition. Although the travel-time inversion only directly constrains the upper crust at the SITF, gravity modelling suggests that it is underlain by a higher density (>3000 kg m-3 ) region spanning the width (~15 km) of its bathymetric expression, that may reflect a broad region of metasomatism, mantle hydration or melt-depleted lithospheric mantle. At the MCSC ridge-axis to the north, the oceanic crust appears to be forming in zones, where each zone is defined by the volume of its magma supply. The ridge tip adjacent to the SITF is currently in a magma rich phase of accretion. However, there is no evidence for melt leakage into the transform zone. The width and crustal structure of the SITF suggests its motion is currently predominantly orthogonal to spreading. Comparison to CAYSEIS Profile P04, located to the west and running across-margin and through 10 Ma MCSC oceanic crust, suggests that, at about this time, motion along the SITF had a left-lateral transtensional component, that accounts for its apparently broad seabed appearance westwards

Volcanic-tectonic structure of the Mt. Dent Oceanic Core Complex in the ultraslow Mid-Cayman Spreading Center determined from detailed seafloor investigation

The flanks of the ultraslow‐spreading Mid‐Cayman Spreading Center (MCSC) are characterized by domal massifs, or oceanic core complexes (OCCs). The most prominent of these, Mt. Dent, comprises lower‐crustal and upper‐mantle lithologies and hosts the Von Damm vent field (VDVF) ~12 km west of the axial deep. Here‐presented AUV‐derived swath sonar (multibeam) mapping and deep‐towed side‐scan sonar imagery lead to our interpretation that: (i) slip along the OCC‐bounding detachment fault is ceasing, (ii) the termination zone, where detachment fault meets the hanging wall, is disintegrating, (iii) the domed surface of the OCC is cut by steep north‐south extensional faulting, and (iv) the breakaway zone is cut by outward‐facing faults. The VDVF and dispersed pockmarks on the OCC's south flank further suggest that hydrothermal fluid flow is pervasive within the faulted OCC. On the axial floor of the MCSC, bright acoustic backscatter and multibeam bathymetry reveal: (v) a volcanic detachment hanging wall, (vi) a major fault rifting the southern flank of Mt. Dent, and (vii) a young axial volcanic ridge intersecting its northern flank. These observations are described by a conceptual model wherein detachment faulting and OCC exhumation are ceasing during an increase in magmatic intrusion, brittle deformation, and hydrothermal circulation within the OCC. Together, this high‐resolution view of the MCSC provides an instructive example of how OCCs formed within an overall melt‐starved ultraslow spreading center can undergo magmatism, hydrothermal activity, and faulting in much the same way as expected in magmatically more robust slow‐spreading centers elsewhere

Seismic structure and segmentation of the axial valley of the Mid-Cayman Spreading Center.

We report the results of a two-dimensional tomographic inversion of marine seismic refraction data from an array of ocean-bottom seismographs (OBSs), which produced an image of the crustal structure along the axial valley of the ultraslow-spreading Mid-Cayman Spreading Center (MCSC). The seismic velocity model shows variations in the thickness and properties of the young oceanic crust that are consistent with the existence of two magmatic-tectonic segments along the 110 km-long spreading center. Seismic wave speeds are consistent with exhumed mantle at the boundary between these two segments, but changes in the vertical gradient of seismic velocity suggest that volcanic crust occupies most of the axial valley seafloor along the seismic transect. The two spreading segments both have a low-velocity zone (LVZ) several kilometers beneath the seafloor, which may indicate the presence of shallow melt. However, the northern segment also has low seismic velocities (3 km/s) in a thick upper crustal layer (1.5-2.0 km), which we interpret as an extrusive volcanic section with high porosity and permeability. This segment hosts the Beebe vent field, the deepest known high-temperature black smoker hydrothermal vent system. In contrast, the southern spreading segment has seismic velocities as high as 4.0 km/s near the seafloor. We suggest that the porosity and permeability of the volcanic crust in the southern segment are much lower, thus limiting deep seawater penetration and hydrothermal recharge. This may explain why no hydrothermal vent system has been found in the southern half of the MCSC

Magmatic-tectonic conditions for hydrothermal venting on an ultraslow-spread oceanic core complex

Hydrothermal venting, an important cooling mechanism of the Earth, supports a diverse array of seafloor and sub-seafloor ecosystems that are sustained by large thermal and chemical fluxes. Vents have been found along even the slowest and coldest spreading centers, calling into question the driving heat source for these vents. The ultraslow-spreading Mid-Cayman Spreading Center in the Caribbean Sea, which hosts the axial-flank Von Damm Vent Field (VDVF), provides an opportunity to probe the mechanisms for venting at ultraslow spreading rates. Using active-source seismic data from the 2015 CaySeis (Cayman Seismic) experiment, we determined the seismic velocities in the large massif beneath the VDVF. We propose that this massif was produced by a pulse of on-axis magmatism at ca.2 Ma, which was then followed by exhumation, cooling, and fracturing. A low seismic velocity anomaly 5 km below the VDVF is evidence for either a cracking front mining lithospheric heat or intrusive magmatic sills, both of which could drive ongoing deep hydrothermal fluid circulation. We conclude that the transient magmatism and variable crustal thickness at ultraslow-spreading centers create conditions for long-lived hydrothermal venting that may be widespread, and other VDVF-like vents may be common in these areas

Seismic investigation of an active ocean-continent transform margin: the interaction between the Swan Islands Fault Zone and the ultraslow-spreading Mid-Cayman Spreading Centre

The Swan Islands Transform Fault (SITF) marks the southern boundary of the Cayman Trough and the ocean–continent transition of the North American–Caribbean Plate boundary offshore Honduras. The CAYSEIS experiment acquired a 180-km-long seismic refraction and gravity profile across this transform margin, ∼70 km to the west of the Mid-Cayman Spreading Centre (MCSC). This profile shows the crustal structure across a transform fault system that juxtaposes Mesozoic-age continental crust to the south against the ∼10-Myr-old ultraslow spread oceanic crust to the north. Ocean-bottom seismographs were deployed along-profile, and inverse and forward traveltime modelling, supported by gravity analysis, reveals ∼23-km-thick continental crust that has been thinned over a distance of ∼70 km to ∼10 km-thick at the SITF, juxtaposed against ∼4-km-thick oceanic crust. This thinning is primarily accommodated within the lower crust. Since Moho reflections are not widely observed, the 7.0 km s−1 velocity contour is used to define the Moho along-profile. The apparent lack of reflections to the north of the SITF suggests that the Moho is more likely a transition zone between crust and mantle. Where the profile traverses bathymetric highs in the off-axis oceanic crust, higher P-wave velocity is observed at shallow crustal depths. S-wave arrival modelling also reveals elevated velocities at shallow depths, except for crust adjacent to the SITF that would have occupied the inside corner high of the ridge-transform intersection when on axis. We use a Vp/Vs ratio of 1.9 to mark where lithologies of the lower crust and uppermost mantle may be exhumed, and also to locate the upper-to-lower crustal transition, identify relict oceanic core complexes and regions of magmatically formed crust. An elevated Vp/Vs ratio suggests not only that serpentinized peridotite may be exposed at the seafloor in places, but also that seawater has been able to flow deep into the crust and upper mantle over 20–30-km-wide regions which may explain the lack of a distinct Moho. The SITF has higher velocities at shallower depths than observed in the oceanic crust to the north and, at the seabed, it is a relatively wide feature. However, the velocity–depth model subseabed suggests a fault zone no wider than ∼5–10 km, that is mirrored by a narrow seabed depression ∼7500 m deep. Gravity modelling shows that the SITF is also underlain, at >2 km subseabed, by a ∼20-km-wide region of density >3000 kg m−3 that may reflect a broad region of metamorphism. The residual mantle Bouguer anomaly across the survey region, when compared with the bathymetry, suggests that the transform may also have a component of left-lateral trans-tensional displacement that accounts for its apparently broad seabed appearance, and that the focus of magma supply may currently be displaced to the north of the MCSC segment centre. Our results suggest that Swan Islands margin development caused thinning of the adjacent continental crust, and that the adjacent oceanic crust formed in a cool ridge setting, either as a result of reduced mantle upwelling and/or due to fracture enhanced fluid flow

Future scientific drilling of oceanic crust

Processes that occur within and across the oceanic crust–in particular along mid-ocean ridges and oceanic spreading centers—play a huge role in the dynamics of the Earth. The largest fluxes of heat and material between the Earth's mantle, crust, and seawater occur via magmatic, tectonic, and hydrothermal processes along oceanic spreading centers and their vast flanks. Roughly two thirds of the Earth's surface is accreted through magmatic and tectonic processes along mid-ocean ridges, and subduction of this ocean crust in turn influences mantle compositions. Exchange of elements between ocean crust and seawater strongly influences seawater compositions and leaves a geologic record of fluid-rock reactions in altered ocean crust. Some of these reactions contribute energy to microbial activity of a largely unexplored biosphere. The dynamics of ridge and ocean crustal processes therefore have enormous implications for thermal, chemical, and biological exchanges between the solid Earth and the hydrosphere