Enhancing students’ learning through simulation: dealing with diverse, large cohorts

As the field of health care simulation matures, new questions about appropriate pedagogy are emerging which present challenges to research and practices. This has implications for how we investigate and deliver effective simulations, how we conceive effectiveness, and how we make decisions about investment in simulation infrastructure. In this article, we explore two linked challenges that speak to these wider concerns: student diversity and large cohorts. We frame these within contemporary simulation practices and offer recommendations for research and practice that will account for students' varying cultural expectations about learning and clinical practice in the Australian context

Interprofessional learning at work: What spatial theory can tell us about workplace learning in an acute care ward

It is widely recognized that every workplace potentially provides a rich source of learning. Studies focusing on health care contexts have shown that social interaction within and between professions is crucial in enabling professionals to learn through work, address problems and cope with challenges of clinical practice. While hospital environments are beginning to be understood in spatial terms, the links between space and interprofessional learning at work have not been explored. This paper draws on Lefebvre's tri-partite theoretical framework of perceived, conceived and lived space to enrich understandings of interprofessional learning on an acute care ward in an Australian teaching hospital. Qualitative analysis was undertaken using data from observations of Registered Nurses at work and semi-structured interviews linked to observed events. The paper focuses on a ward round, the medical workroom and the Registrar's room, comparing and contrasting the intended (conceived), practiced (perceived) and pedagogically experienced (lived) spatial dimensions. The paper concludes that spatial theory has much to offer understandings of interprofessional learning in work, and the features of work environments and daily practices that produce spaces that enable or constrain learning. © 2014 Informa UK Ltd

Calibration of <i>Herschel</i> SPIRE FTS observations at different spectral resolutions

The SPIRE Fourier Transform Spectrometer on-board the Herschel Space Observatory had two standard spectral resolution modes for science observations: high resolution (HR) and low resolution (LR), which could also be performed in sequence (H+LR). A comparison of the HR and LR resolution spectra taken in this sequential mode revealed a systematic discrepancy in the continuum level. Analysing the data at different stages during standard pipeline processing demonstrates that the telescope and instrument emission affect HR and H+LR observations in a systematically different way. The origin of this difference is found to lie in the variation of both the telescope and instrument response functions, while it is triggered by fast variation of the instrument temperatures. As it is not possible to trace the evolution of the response functions using housekeeping data from the instrument subsystems, the calibration cannot be corrected analytically. Therefore, an empirical correction for LR spectra has been developed, which removes the systematic noise introduced by the variation of the response functions

Systematic characterisation of the Herschel SPIRE Fourier Transform Spectrometer

A systematic programme of calibration observations was carried out to monitor the performance of the SPIRE FTS instrument on board the Herschel Space Observatory. Observations of planets (including the prime point-source calibrator, Uranus), asteroids, line sources, dark sky, and cross-calibration sources were made in order to monitor repeatability and sensitivity, and to improve FTS calibration. We present a complete analysis of the full set of calibration observations and use them to assess the performance of the FTS. Particular care is taken to understand and separate out the effect of pointing uncertainties, including the position of the internal beam steering mirror for sparse observations in the early part of the mission. The repeatability of spectral line centre positions is <5km/s, for lines with signal-to-noise ratios >40, corresponding to <0.5-2.0% of a resolution element. For spectral line flux, the repeatability is better than 6%, which improves to 1-2% for spectra corrected for pointing offsets. The continuum repeatability is 4.4% for the SLW band and 13.6% for the SSW band, which reduces to ~1% once the data have been corrected for pointing offsets. Observations of dark sky were used to assess the sensitivity and the systematic offset in the continuum, both of which were found to be consistent across the FTS detector arrays. The average point-source calibrated sensitivity for the centre detectors is 0.20 and 0.21 Jy [1 sigma; 1 hour], for SLW and SSW. The average continuum offset is 0.40 Jy for the SLW band and 0.28 Jy for the SSW band.Comment: 41 pages, 37 figures, 32 tables. Accepted for publication in MNRA

Calibration of the Herschel SPIRE Fourier Transform Spectrometer

The Herschel SPIRE instrument consists of an imaging photometric camera and an imaging Fourier Transform Spectrometer (FTS), both operating over a frequency range of 450-1550 GHz. In this paper, we briefly review the FTS design, operation, and data reduction, and describe in detail the approach taken to relative calibration (removal of instrument signatures) and absolute calibration against standard astronomical sources. The calibration scheme assumes a spatially extended source and uses the Herschel telescope as primary calibrator. Conversion from extended to point-source calibration is carried out using observations of the planet Uranus. The model of the telescope emission is shown to be accurate to within 6% and repeatable to better than 0.06% and, by comparison with models of Mars and Neptune, the Uranus model is shown to be accurate to within 3%. Multiple observations of a number of point-like sources show that the repeatability of the calibration is better than 1%, if the effects of the satellite absolute pointing error (APE) are corrected. The satellite APE leads to a decrement in the derived flux, which can be up to ~10% (1 sigma) at the high-frequency end of the SPIRE range in the first part of the mission, and ~4% after Herschel operational day 1011. The lower frequency range of the SPIRE band is unaffected by this pointing error due to the larger beam size. Overall, for well-pointed, point-like sources, the absolute flux calibration is better than 6%, and for extended sources where mapping is required it is better than 7%.Comment: 20 pages, 18 figures, accepted for publication in MNRA

Correcting the extended-source calibration for the <i>Herschel</i>-SPIRE Fourier-transform spectrometer

We describe an update to the Herschel-Spectral and Photometric Imaging Receiver (SPIRE) Fourier-transform spectrometer (FTS) calibration for extended sources, which incorporates a correction for the frequency-dependent far-field feedhorn efficiency, ηff. This significant correction affects all FTS extended-source calibrated spectra in sparse or mapping mode, regardless of the spectral resolution. Line fluxes and continuum levels are underestimated by factors of 1.3–2 in thespectrometer long wavelength band (447–1018 GHz; 671–294 μm) and 1.4–1.5 in the spectrometer short wavelength band (944–1568 GHz; 318–191 μm). The correction was implemented in the FTS pipeline version 14.1 and has also been described in the SPIRE Handbook since 2017 February. Studies based on extended-source calibrated spectra produced prior to this pipeline version should be critically reconsidered using the current products available in the Herschel Science Archive. Once the extended-source calibrated spectra are corrected for ηff, the synthetic photometry and the broad-band intensities from SPIRE photometer maps agree within 2–4 per cent – similar levels to the comparison of point-source calibrated spectra and photometry from point-source calibrated maps. The two calibration schemes for the FTS are now self-consistent: the conversion between the corrected extended-source and point-source calibrated spectra can be achieved with the beam solid angle and a gain correction that accounts for the diffraction loss

Far-infrared spectroscopy of a lensed starburst: a blind redshift from Herschel

We report the redshift of HATLAS J132427.0+284452 (hereafter HATLAS J132427), a gravitationally lensed starburst galaxy, the first determined 'blind' by the Herschel Space Observatory. This is achieved via the detection of [C II] consistent with z = 1.68 in a far-infrared spectrum taken with the SPIRE Fourier Transform Spectrometer. We demonstrate that the [C II] redshift is secure via detections of CO J = 2 - 1 and 3 - 2 using the Combined Array for Research in Millimeter-wave Astronomy and the Institut de Radioastronomie Millimetrique's Plateau de Bure Interferometer. The intrinsic properties appear typical of high-redshift starbursts despite the high lensing-amplified fluxes, proving the ability of the FTS to probe this population with the aid of lensing. The blind detection of [C II] demonstrates the potential of the SAFARI imaging spectrometer, proposed for the much more sensitive SPICA mission, to determine redshifts of multiple dusty galaxies simultaneously without the benefit of lensing.Comment: 6 pages, 5 figures, accepted for publication in MNRAS as a Lette