A Limit on the Large Angular Scale Polarization of the Cosmic Microwave Background

We present an upper limit on the polarization of the Cosmic Microwave Background at 7 degree angular scales in the frequency band between 26 and 36 GHz, produced by the POLAR experiment. The campaign produced a map of linear polarization over the R.A. range 112 degrees - 275 degrees at declination 43degrees. The model-independent upper limit on the E-mode polarization component of the CMB at angular scales l = 2 - 20 is 10 microKelvin (95% confidence). The corresponding limit for the B-mode is also 10 microKelvin. Constraining the B-mode power to be zero, the 95% confidence limit on E-mode power alone is 8 microKelvin

Ultra High Energy Cosmology with POLARBEAR

Observations of the temperature anisotropy of the Cosmic Microwave Background (CMB) lend support to an inflationary origin of the universe, yet no direct evidence verifying inflation exists. Many current experiments are focussing on the CMB's polarization anisotropy, specifically its curl component (called "B-mode" polarization), which remains undetected. The inflationary paradigm predicts the existence of a primordial gravitational wave background that imprints a unique B-mode signature on the CMB's polarization at large angular scales. The CMB B-mode signal also encodes gravitational lensing information at smaller angular scales, bearing the imprint of cosmological large scale structures (LSS) which in turn may elucidate the properties of cosmological neutrinos. The quest for detection of these signals; each of which is orders of magnitude smaller than the CMB temperature anisotropy signal, has motivated the development of background-limited detectors with precise control of systematic effects. The POLARBEAR experiment is designed to perform a deep search for the signature of gravitational waves from inflation and to characterize lensing of the CMB by LSS. POLARBEAR is a 3.5 meter ground-based telescope with 3.8 arcminute angular resolution at 150 GHz. At the heart of the POLARBEAR receiver is an array featuring 1274 antenna-coupled superconducting transition edge sensor (TES) bolometers cooled to 0.25 Kelvin. POLARBEAR is designed to reach a tensor-to-scalar ratio of 0.025 after two years of observation -- more than an order of magnitude improvement over the current best results, which would test physics at energies near the GUT scale. POLARBEAR had an engineering run in the Inyo Mountains of Eastern California in 2010 and will begin observations in the Atacama Desert in Chile in 2011.Comment: 8 pages, 6 figures, DPF 2011 conference proceeding

The bolometric focal plane array of the Polarbear CMB experiment

The Polarbear Cosmic Microwave Background (CMB) polarization experiment is currently observing from the Atacama Desert in Northern Chile. It will characterize the expected B-mode polarization due to gravitational lensing of the CMB, and search for the possible B-mode signature of inflationary gravitational waves. Its 250 mK focal plane detector array consists of 1,274 polarization-sensitive antenna-coupled bolometers, each with an associated lithographed band-defining filter. Each detector's planar antenna structure is coupled to the telescope's optical system through a contacting dielectric lenslet, an architecture unique in current CMB experiments. We present the initial characterization of this focal plane

Development and characterization of the readout system for POLARBEAR-2

POLARBEAR-2 is a next-generation receiver for precision measurements of the polarization of the cosmic microwave background (Cosmic Microwave Background (CMB)). Scheduled to deploy in early 2015, it will observe alongside the existing POLARBEAR-1 receiver, on a new telescope in the Simons Array on Cerro Toco in the Atacama desert of Chile. For increased sensitivity, it will feature a larger area focal plane, with a total of 7,588 polarization sensitive antenna-coupled Transition Edge Sensor (TES) bolometers, with a design sensitivity of 4.1 uKrt(s). The focal plane will be cooled to 250 milliKelvin, and the bolometers will be read-out with 40x frequency domain multiplexing, with 36 optical bolometers on a single SQUID amplifier, along with 2 dark bolometers and 2 calibration resistors. To increase the multiplexing factor from 8x for POLARBEAR-1 to 40x for POLARBEAR-2 requires additional bandwidth for SQUID readout and well-defined frequency channel spacing. Extending to these higher frequencies requires new components and design for the LC filters which define channel spacing. The LC filters are cold resonant circuits with an inductor and capacitor in series with each bolometer, and stray inductance in the wiring and equivalent series resistance from the capacitors can affect bolometer operation. We present results from characterizing these new readout components. Integration of the readout system is being done first on a small scale, to ensure that the readout system does not affect bolometer sensitivity or stability, and to validate the overall system before expansion into the full receiver. We present the status of readout integration, and the initial results and status of components for the full array.Comment: Presented at SPIE Astronomical Telescopes and Instrumentation 2014: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII. Published in Proceedings of SPIE Volume 915

Modeling Atmospheric Emission for CMB Ground-based Observations

Atmosphere is one of the most important noise sources for ground-based cosmic microwave background (CMB) experiments. By increasing optical loading on the detectors, it amplifies their effective noise, while its fluctuations introduce spatial and temporal correlations between detected signals. We present a physically motivated 3D-model of the atmosphere total intensity emission in the millimeter and sub-millimeter wavelengths. We derive a new analytical estimate for the correlation between detectors time-ordered data as a function of the instrument and survey design, as well as several atmospheric parameters such as wind, relative humidity, temperature and turbulence characteristics. Using an original numerical computation, we examine the effect of each physical parameter on the correlations in the time series of a given experiment. We then use a parametric-likelihood approach to validate the modeling and estimate atmosphere parameters from the POLARBEAR-I project first season data set. We derive a new 1.0% upper limit on the linear polarization fraction of atmospheric emission. We also compare our results to previous studies and weather station measurements. The proposed model can be used for realistic simulations of future ground-based CMB observations

Results of gravitational lensing and primordial gravitational waves from the POLARBEAR experiment

POLARBEAR is a Cosmic Microwave Background radiation (CMB) polarization experiment that is located in the Atacama Desert in Chile. The scientific goals of the experiment are to characterize the B-mode signal from gravitational lensing, as well as to search for B-mode signals created by primordial gravitational waves (PGWs). Polarbear started observations in 2012 and has published a series of results. These include the first measurement of a nonzero B-mode angular auto-power spectrum at sub-degree scales where the dominant signal is gravitational lensing of the CMB. In addition, we have achieved the first measurement of crosscorrelation between the lensing potential, which was reconstructed from the CMB polarization data alone by Polarbear, and the cosmic shear field from galaxy shapes by the Subaru Hyper Suprime-Cam (HSC) survey. In 2014, we installed a continuously rotating half-wave plate (CRHWP) at the focus of the primary mirror to search for PGWs and demonstrated the control of low-frequency noise. We have found that the low-frequency B-mode power in the combined dataset with the Planck high-frequency maps is consistent with Galactic dust foreground, thus placing an upper limit on the tensor-to-scalar ratio of r < 0.90 at the 95% confidence level after marginalizing over the foregrounds

The Cosmic Foreground Explorer (COFE): a balloon-borne microwave polarimeter to characterize polarized foregrounds

The COsmic Foreground Explorer (COFE) is a balloon-borne microwave polarimeter designed to measure the low-frequency and low-ℓ characteristics of dominant diffuse polarized foregrounds. Short duration balloon flights from the Northern and Southern Hemispheres will allow the telescope to cover up to 80% of the sky with an expected sensitivity per pixel better than 100 μK/deg2 from 10 GHz to 20 GHz. This is an important effort toward characterizing the polarized foregrounds for future CMB experiments, in particular the ones that aim to detect primordial gravity wave signatures in the CMB polarization angular power spectrum

The cosmic microwave background anisotropy power spectrum from the BEAST experiment

The Background Emission Anisotropy Scanning Telescope (BEAST) is a 2.2 m off-axis telescope with an eight-element mixed Q-band (38-45 GHz) and Ka-band (26-36 GHz) focal plane, designed for balloon-borne and ground-based studies of the cosmic microwave background (CMB). Here we present the CMB angular power spectrum calculated from 682 hr of data observed with the BEAST instrument. We use a binned pseudo-C-l estimator (the MASTER method). We find results that are consistent with other determinations of the CMB anisotropy for angular wavenumbers l between 100 and 600. We also perform cosmological parameter estimation. The BEAST data alone produce a good constraint on Omega(k) = 1 - Omega(tot) = 0.074 +/- 0.070, consistent with a flat universe. A joint parameter estimation analysis with a number of previous CMB experiments produces results consistent with previous determinations

The Background Emission Anisotropy Scanning Telescope (BEAST) Instrument Description and Performances

The Background Emission Anisotropy Scanning Telescope (BEAST) is a millimeter wavelength experiment designed to generate maps of fluctuations in the cosmic microwave background (CMB). The telescope is composed of an off-axis Gregorian optical system with a 2.2 m primary that focuses the collected microwave radiation onto an array of cryogenically cooled high electron mobility transistor (HEMT) receivers. This array is composed of six corrugated scalar feed horns in the Q band (38 to 45 GHz) and two more in the Ka band (26 to 36 GHz) with one of the six Q-band horns connected to an ortho-mode transducer for extraction of both polarizations incident on the single feed. The system has a minimum beam size of 20' with an average sensitivity of 900 \u3bcK sqrt(s) per receiver. This paper describes the design and performance of the BEAST instrument and provides the details of subsystems developed and used toward the goal of generating a map of CMB fluctuations on 20' scales with sensitivity in l space between l~100 and l~500. A map of the CMB centered on the north celestial pole has been generated from the BEAST telescope in a 9\ub0 wide annulus at declination 37\ub0 with a typical pixel error of 57+/-5 \u3bcK when smoothed to 30' resolution. A brief summary of the map and results generated by an observing campaign at the University of California White Mountain Research Station are also included

A Map of the Cosmic Microwave Background from the BEAST Experiment

We present the first sky maps from the BEAST (Background Emission Anisotropy Scanning Telescope) experiment. BEAST consists of a 2.2 m off-axis Gregorian telescope fed by a cryogenic millimeter wavelength focal plane currently consisting of six Q band (40 GHz) and two Ka band (30 GHz) scalar feed horns feeding cryogenic HEMT amplifiers. Data were collected from two balloon-borne flights in 2000, followed by a lengthy ground observing campaign from the 3.8 km altitude University of California White Mountain Research Station. This paper reports the initial results from the ground-based observations. The instrument produced an annular map covering the sky over 33deg<δ<42deg. The maps cover an area of 2470 deg2 with an effective resolution of 23' FWHM at 40 GHz and 30' at 30 GHz. The map rms (smoothed to 30' and excluding Galactic foregrounds) is 57+/-5 μK (Rayleigh-Jeans) at 40 GHz. Comparison with the instrument noise and correcting for 5% atmospheric attenuation gives a cosmic signal rms contribution of 29+/-3 μK (R-J) or 30+/-3 μK relative to a Planck blackbody of 2.7 K. An estimate of the actual cosmic microwave background (CMB) sky signal requires taking into account the l space filter function of our experiment and analysis techniques, carried out in a companion paper. In addition to the robust detection of CMB anisotropies, we find a strong correlation between small portions of our maps and features in recent Hα maps. In this work we describe the data set and analysis techniques leading to the maps, including data selection, filtering, pointing reconstruction, mapmaking algorithms, and systematic effects