Nanostructured Gd0.8Sr0.2Fe0.8M0.2O3 (M=Cr, Ga) materials for solid oxide fuel cell cathodes

AbstractPolycrystalline samples of Gd0.8Sr0.2Fe0.8M0.2O3 (M=Cr, Ga) are prepared by combustion route and pore wetting technique in order to compare the influence of the morphology in the performance of two cathodes for Solid Oxide Fuel Cells. When polycarbonate membranes are used as templates nanowire arrays with a diameter of 50–70 nm are obtained. Comparing the results obtained by Electrochemical Impedance Spectroscopy (EIS) measurements, it is clearly observed that the cathodic resistance considerably decreases when optimized synthesis parameters are used, obtaining a better performance for the Gd0.8Sr0.2Fe0.8Ga0.2O3 nanowires with an area specific resistance (ASR) value at 850∘C of 0.195 Ω cm2

High Performance Na-O2 Batteries and Printed Microsupercapacitors Based on Water-Processable, Biomolecule-Assisted Anodic Graphene

Integrated approaches that expedite the production and processing of graphene into useful structures and devices, particularly through simple and environmentally friendly strategies, are highly desirable in the efforts to implement this two-dimensional material in state-of-the-art electrochemical energy storage technologies. Here, we introduce natural nucleotides (e.g., adenosine monophosphate) as bifunctional agents for the electrochemical exfoliation and dispersion of graphene nanosheets in water. Acting both as exfoliating electrolytes and colloidal stabilizers, these biomolecules facilitated access to aqueous graphene bio-inks that could be readily processed into aerogels and inkjet-printed interdigitated patterns. Na-O2 batteries assembled with the graphene-derived aerogels as the cathode and a glyme-based electrolyte exhibited a full discharge capacity of ∼3.8 mAh cm–2 at a current density of 0.2 mA cm–2. Moreover, shallow cycling experiments (0.5 mAh cm–2) boasted a capacity retention of 94% after 50 cycles, which outperformed the cycle life of prior graphene-based cathodes for this type of battery. The positive effect of the nucleotide-adsorbed nanosheets on the battery performance is discussed and related to the presence of the phosphate group in these biomolecules. Microsupercapacitors made from the interdigitated graphene patterns as the electrodes also displayed a competitive performance, affording areal and volumetric energy densities of 0.03 μWh cm–2 and 1.2 mWh cm–3 at power densities of 0.003 mW cm–2 and 0.1 W cm–3, respectively. Taken together, by offering a green and straightforward route to different types of functional graphene-based materials, the present results are expected to ease the development of novel energy storage technologies that exploit the attractions of graphene.Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R and by the Spanish Ministerio de Ciencia, Innovación y Universidades and ERDF through project RTI2018-100832-B-I00 is gratefully acknowledged. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF through project IDI/2018/000233 is also acknowledged. J.M.M. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte (MECD) for his pre-doctoral contract (FPU14/00792). J.N.C. acknowledges the ERC Adv. Gr. FUTUREPRINT. This work was also financially supported by the European Union (Graphene Flagship, Core 2, Grant number 785219).Peer reviewe

Rate-Dependent Nucleation and Growth of NaO2 in Na-O2 Batteries

Understanding the oxygen reduction reaction kinetics in the presence of Na ions and the formation mechanism of discharge product(s) is key to enhancing Na–O2 battery performance. Here we show NaO2 as the only discharge product from Na–O2 cells with carbon nanotubes in 1,2-dimethoxyethane from X-ray diffraction and Raman spectroscopy. Sodium peroxide dihydrate was not detected in the discharged electrode with up to 6000 ppm of H2O added to the electrolyte, but it was detected with ambient air exposure. In addition, we show that the sizes and distributions of NaO2 can be highly dependent on the discharge rate, and we discuss the formation mechanisms responsible for this rate dependence. Micron-sized (∼500 nm) and nanometer-scale (∼50 nm) cubes were found on the top and bottom of a carbon nanotube (CNT) carpet electrode and along CNT sidewalls at 10 mA/g, while only micron-scale cubes (∼2 μm) were found on the top and bottom of the CNT carpet at 1000 mA/g, respectively.Seventh Framework Programme (European Commission) (Marie Curie International Outgoing Fellowship, 2007-2013))National Science Foundation (U.S.) (MRSEC Program, award number DMR-0819762)Robert Bosch GmbH (Bosch Energy Research Network (BERN) Grant)China Clean Energy Research Center-Clean Vehicles Consortium (CERC-CVC) (award number DE-PI0000012)Skolkovo Institute of Science and Technology (Skoltech-MIT Center for Electochemical Energy Storage

Materials challenges in rechargeable lithium-air batteries

Y.S-H., N.O.-V. and D.G.K. acknowledge the Robert Bosch Company for a Bosch Energy Research Network Grant, the CERC-CVC US China Clean Energy Research Center-Clean Vehicles Consortium of the Department of Energy (under award number DE—PI0000012), and the MRSEC program of the National Science Foundation for their support (under award number DMR—0819762). N.O.-V. acknowledges a Marie Curie International Outgoing Fellowship within the seventh European Community Framework Programme (2012). P.G.B. acknowledges the EPSRC for financial support, including the SUPERGEN program. S.A.F. acknowledges financial support by the Austrian Federal Ministry of Economy, Family and Youth and the Austrian National Foundation for Research, Technology and Development.Lithium-air batteries have received extraordinary attention recently owing to their theoretical gravimetric energies being considerably higher than those of Li-ion batteries. There are, however, significant challenges to practical implementation, including low energy efficiency, cycle life, and power capability. These are due primarily to the lack of fundamental understanding of oxygen reduction and evolution reaction kinetics and parasitic reactions between oxygen redox intermediate species and nominally inactive battery components such as carbon in the oxygen electrode and electrolytes. In this article, we discuss recent advances in the mechanistic understanding of oxygen redox reactions in nonaqueous electrolytes and the search for electrolytes and electrode materials that are chemically stable in the oxygen electrode. In addition, methods to protect lithium metal against corrosion by water and dendrite formation in aqueous lithium-air batteries are discussed. Further materials innovations lie at the heart of research and development efforts that are needed to enable the development of lithium-oxygen batteries with enhanced round-trip efficiency and cycle life.Publisher PDFPeer reviewe

Electrochemical characterization of La_0.6Ca_0.4Fe_0.8Ni_0.2O_3-δ perovskite cathode for IT-SOFC

Electrolyte supported symmetric cells featuring La0.6Ca0.4Fe0.8Ni0.2O3 (LCFN) electrodes are studied by electrochemical impedance spectroscopy. The aim is to describe the polarization losses of this mixed ionic electronic conductor electrode at various cell operating conditions for cells sintered at different temperatures. An equivalent circuit describing the cathode polarization resistances was constructed from analyzing impedance spectra recorded at different oxygen partial pressures and temperatures. Favorable oxygen reduction reaction properties are demonstrated for the LCFN cell sintered at 750 degrees C with a polarization resistance of 0.05 Omega cm(2) at an operating temperature of 800 degrees C in pure oxygen. (C) 2013 Elsevier B.V. All rights reserved

The formation of performance enhancing pseudo-composites in the highly active La1-xCaxFe0.8Ni0.2O 3 system for IT-SOFC application

10.1002/adfm.201300481Advanced Functional Materials23415131-513

Biomimetic nucleotide-graphene hybrids for electrocatalytic oxygen conversion: quantifying biomolecule mass loading

Metal-free electrocatalysts for the electrochemical conversion of gases constitute an important asset for a sustainable energy transition. Nucleotides act as redox mediators in the electron transport chain to reduce oxygen in cellular respiration. The biomimicry of such an efficient natural mechanism could be utilized to address the challenges associated with electrochemical gas conversion technologies, such as sluggish kinetics and high overpotentials. Multiple descriptors are generally reported to benchmark the activity of electrocatalysts where the turnover frequency (TOF) is claimed to be the most accurate criterion. Here, a library of graphene nanosheets-nucleotide hybrid materials was prepared, and the electrocatalytic performance towards ORR/OER reactions of a graphene-flavin mononucleotide hybrid was evaluated by rotating disc electrode experiments and TOF estimation. The determination of catalyst loading and dispersion is especially relevant when assessing the intrinsic activity of a catalyst and, therefore, the amount of nucleotide electrocatalyst loaded into the graphene support was thoroughly quantified by a combination of characterization techniques. Density functional theory calculations supported the observed experimental trends, both on the adsorption rate of a given nucleotide on graphene and the catalytic activity of a specific hybrid material. This work constitutes an avenue to predict nature-mimicking electrocatalysts for efficient energy storage