Accuracy of linear measurement using cone-beam computed tomography at different reconstruction angles

Purpose: This study was performed to evaluate the effect of changing the orientation of a reconstructed image on the accuracy of linear measurements using cone-beam computed tomography (CBCT). Materials and Methods: Forty-two titanium pins were inserted in seven dry sheep mandibles. The length of these pins was measured using a digital caliper with readability of 0.01 mm. Mandibles were radiographed using a CBCT device. When the CBCT images were reconstructed, the orientation of slices was adjusted to parallel (i.e., 0°), +10°, +12°, -12°, and -10° with respect to the occlusal plane. The length of the pins was measured by three radiologists, and the accuracy of these measurements was reported using descriptive statistics and one-way analysis of variance (ANOVA); p<0.05 was considered statistically significant. Results: The differences in radiographic measurements ranged from -0.64 to +0.06 at the orientation of -12°, -0.66 to -0.11 at -10°, -0.51 to +0.19 at 0°, -0.64 to +0.08 at +10°, and -0.64 to +0.1 at +12°. The mean absolute values of the errors were greater at negative orientations than at the parallel position or at positive orientations. The observers underestimated most of the variables by 0.5-0.1 mm (83.6%). In the second set of observations, the reproducibility at all orientations was greater than 0.9. Conclusion: Changing the slice orientation in the range of -12°to +12°reduced the accuracy of linear measurements obtained using CBCT. However, the error value was smaller than 0.5 mm and was, therefore, clinically acceptable. © 2014 by Korean Academy of Oral and Maxillofacial Radiology

First molecular subtyping and phylogeny of Blastocystis sp. isolated from domestic and synanthropic animals (dogs, cats and brown rats) in southern Iran

Background: Blastocystis sp. is a common intestinal protist that infects humans and many animals globally. Thus far, 22 subtypes (STs) have been identified in mammalian and avian hosts. Since various STs are common to humans and animals, it was suggested that some human infections might arise from zoonotic transmission. Therefore, the aim of this study was to assess the presence of Blastocystis sp. in domestic (dogs and cats) and synanthropic animals (rats) of Fars Province, Iran, and to genetically characterize the samples. Methods: A total of 400 fresh faecal samples from 154 dogs, 119 cats, and 127 rats were inspected by direct microscopy, Wheatley's trichrome staining, in vitro culture, and 18S rRNA gene nested-PCR. Finally, sequencing and phylogenetic analyses were performed. Results: Out of 400 samples, 47 (11.8%) and 61 (15.3%) samples were detected as positive by direct wet mount and culture, respectively. Molecular analysis detected a larger number of positive samples (n = 70, 17.5%): nested-PCR showed that 29 (18.8%) dogs, 21 (17.7%) cats, and 20 (15.8%) rats were infected by Blastocystis sp. Sequence analysis of positive samples indicated the presence of zoonotic STs in all investigated host species. Specifically, ST2 (allele 9), ST3 (allele 34), ST4 (allele 94), ST7 (allele 99), ST8 (allele 21), and ST10 (allele 152) were detected in dogs; ST1 (allele 2), ST3 (allele 34), ST4 (allele 94), ST10 (allele 152), and ST14 (allele 159) were detected in cats; and ST1 (allele 2), ST3 (allele 34), and ST4 (allele 92) were detected in rats. Conclusions: Our data suggest that domestic dogs and cats can serve as possible reservoirs for in-contact humans, especially those who handle shelter-resident and client-owned animals. Moreover, rats as synanthropic animals can function as a potential source of human infections. Conversely, humans can act as a source of infections to animals. These results should be reinforced in future molecular epidemiological studies.[Figure not available: see fulltext.

Seroprevalence of Toxoplasma gondii

Toxoplasma gondii is an obligate intracellular protozoan parasite causing toxoplasmosis in animals and humans. Primary maternal infection with toxoplasmosis during pregnancy is frequently associated with transplacental transmission to the fetus. However it is not certain whether Toxoplasma infection can cause recurrent abortion. The aim of this study was to determine the relationship between Toxoplasma infection and abortion via detection of anti-Toxoplasma gondii antibodies in sera of women with obstetrical problems and compare the results with control group consisting of women with history of normal delivery. Sera from 130 women with abortion and sera of 130 women with normal delivery were tested for IgG and IgM anti-Toxoplasma gondii antibodies by ELISA method. The present study revealed 24.6% of the samples with abortion and 21.5% of the samples with normal delivery were positive for IgG antibodies. However, statistical analysis indicated no significant differences (P>0.05). In addition, IgM antibody was detected in one woman who had aborted but not in women with normal childbirth. This study showed no significant difference between the case and control groups in IgG anti-Toxoplasma antibody but detected one sample with IgM antibodies in woman with abortion during the first trimester of pregnancy. In order to determine the relationship between Toxoplasma infection and abortion, anti-Toxoplasma IgG avidity and PCR to discriminate between recent and prior infections are recommended

Enhancement of thermal and mechanical stabilities of silicon doped titanium nitride coating by manipulation of sputtering conditions

This study investigates the influence of substrate (AISI M42 tool steel) bias voltage (from −30 to −80 V), on the mechanical properties of magnetron sputtered TiSiN coating derived from Ti and Si targets. Thermal stability, microstructure (crystallite size, microstrain, lattice constant), morphology and mechanical (hardness, Young's modulus, residual stresses) properties, of the deposited TiSiN coatings, were investigated with synchrotron powered X-ray diffraction (SR-XRD), X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and nanoindentation techniques. Rietveld analysis, of the in-situ SR-XRD, in the temperature range of 25–800 °C, demonstrated cubic TiN form in (Ti,Si)N solid solutions, with TiO2 and Ti2O3 identified at lower bias voltages. Density functional theory supplemented the experimental results. Increase in the bias voltage resulted in: (i) a decrease in Si content, (ii) significant smoothening of surface morphology, (iii) change in the phase composition and microstructure, (iv) improved oxidation resistance and thermal oxidation threshold, and (v) hardness and Young's modulus of the coatings increased up to 50% to 33 GPa and 450 GPa, respectively

An Investigation into the Oil Transport and Starvation of Piston-Ring Pack

In order to accurately predict the lubricant film thickness and generated friction in any tribological contact, it is important to determine appropriate boundary conditions, taking into account the oil availability and extent of starvation. This paper presents a two-dimensional hydrodynamic model of a piston ring pack for prediction of lubricant film thickness, friction and total power loss. The model takes into account starvation caused by reverse flow at the conjunctional inlet wedge, and applied to a ring pack, comprising a compression and scraper ring. Inlet boundaries are calculated for an engine cycle of a four-cylinder, four-stroke gasoline engine operating at 1500 r/min with conditions pertaining to the New European Drive Cycle. The analysis shows the two main sources of starvation: first, due to a physical lack of inlet meniscus and second, due to reverse flow at the inlet wedge significantly affecting the prevailing conditions from the generally assumed idealised boundary conditions. Such an approach has not hitherto been reported in literature

Heavy metals in recycled pastry packages and pastries

The safe use of recycled paper and board material for food packaging applications is a major area of investigations. Therefore, the aim of current study was to evaluate the amount of heavy metals in recycled paper pastry packages and measurement of migration over the time into pastries. In this study, the presence of heavy metals in common confectionery packaging and effects of storage time and kind of pastry on the migration are investigated. The results of the study indicate that harmful metals such as Pb are detected at high concentrations in most of the recycled boxes that are used for pastry packaging, and heavy metals could migrate from the recycled packages into food during usage. It seems that the procedure of preparing recycled paperboard for food packaging should be reconsidered

Casimir type effects for scalar fields interacting with material slabs

We study the field theoretical model of a scalar field in presence of spacial inhomogeneities in form of one and two finite width mirrors (material slabs). The interaction of the scalar field with the defect is described with position-dependent mass term. For the single layer system we develop a rigorous calculation method and derive explicitly the propagator of the theory, S-matrix elements and the Casimir self-energy of the slab. Detailed investigation of particular limits of self-energy is presented, and connection to know cases is discussed. The calculation method is found applicable to the two mirrors case as well. By means of it we derive the corresponding Casimir energy and analyze it. For particular values of the parameters of the model the obtained results recover the Lifshitz formula. We also propose a procedure to obtain unambiguously the finite Casimir \textit{self}-energy of a single slab without reference to any renormalizations. We hope that our approach can be applied to calculation of Casimir self-energies in other demanded cases (such as dielectric ball, etc.)Comment: 22 pages, 3 figures, published version, significant changes in Section 4.

Non-Newtonian Mixed Thermo-Elastohydrodynamics of Hypoid Gear Pairs

Transmission efficiency is the main objective in the development of vehicular differential systems, comprising hypoid gear pairs. The overall aim is to contribute to improved vehicle fuel efficiency and thus levels of harmful emissions for modern desired eco-drive axles. Detailed predictive analysis plays an important role in this quest, particularly under realistic operating conditions, comprising high contact loads and shear rates. Under these conditions, the hypoid gear pairs are subject to mixed non-Newtonian thermo-elastohydrodynamic conditions, which is the approach undertaken in this paper. Such an approach for hypoid gear pair has not hitherto been reported in the literature

Evaluation of phenotypic and genotypic characteristics of carbapnemases-producing enterobacteriaceae and its prevalence in a referral hospital in Tehran city

Background & Objective: Carbapenem-resistant Enterobacteriaceae is a growing concern worldwide including Iran. The emergence of this pathogen is worrying as carbapenem is one of the �last-line� antibiotics for treatment of infections caused by multi drug resistant gram- negative bacteria. The main objective of this study was to determine the prevalence of carbapenem-resistant Enterobacteriaceae in a referral hospital in Tehran, Iran. Methods: In this study, all positive isolates of Enterobacteriaceae recorded in blood, urine, and other body fluids were studied during April 2017 to April 2018 in a referral hospital in Tehran. All cases of resistance to carbapenems were first tested by modified Hodge test. All cases with positive or negative test, after gene extraction, were examined genotypically based on the primers designed for the three Klebsiella pneumoniae carbapenemase (KPC), New Delhi metallo-β-lactamase (NDM), and OXA-48 genes by conventional PCR method. Results: 108 isolates (13.6) were resistant to all cephalosporins as well as to imipenem and meropenem. In a genotypic study, including 45 isolates, 13 isolates were positive for OXA-48 gene, 11 isolates for OXA-48 and NDM genes, 11 isolates for OXA-48, NDM and KPC genes, 4 isolates for OXA-48 genes and KPC, 3 isolates for NDM, one isolate for KPC. On the other hand, two isolates were negative for all three genes examined. Conclusion: OXA-48 gene was one of the most common genes resistant to carbapenems in Iran. According to studies, the prevalence of antibiotic resistance in Iran is rising dramatically, which reduces the choice of antibiotics to treat severe infections in the future. © 2020, Iranian Society of Pathology. All rights reserved

Effect of teeth micro-geometrical form modification on contact kinematics and efficiency of high performance transmissions

Light weight, compactness and efficiency are key objectives in high performance vehicular transmission systems, which are subject to large variations in torque and power. Pitch line velocities of up to 52 m/s and teeth pair contact pressures of up to 3 GPa are routinely encountered under race conditions. Contact patch asymmetry due to angular misalignments between input and output shafts leads to the generation of high edge stress discontinuities on gear flanks, inducing fatigue spalling which affects system durability. Crowning is widely used as a palliative measure to mitigate these undesired effects. These problems can be further exacerbated by contact footprint truncation. The paper presents a new approach to modelling the kinematics and contact micro-geometry of meshing conjunctions of involute spur gears with profile and lead modifications. A time-efficient analytical method is presented to accurately determine the contact footprint and kinematics, leading to the solution of highly loaded non-Newtonian mixed thermo-elastohydrodynamic contact under the extreme prevalent conditions of high performance vehicular transmissions. The effect of tooth form modification on contact footprint truncation, contact kinematics and generated frictional power loss is investigated. This approach has not hitherto been reported in literature