1,155 research outputs found
The behaviour of boron compounds in treated rattan when dehydrated at high temperatures
The behaviour of boron compounds per se and boron compounds in treated stem of rotan manau (Calamus
manan A1iq.) dried at elevated temperatures was studied. When borax and boric acid are mixed, sodium 1:5 borate
is formed. After drying at 100±30, 50±10, or <O°C, the measured and the calculated (in parentheses) percentage
weight losses from the mixtures were 40.34 (40.10), 39.31 (36.39) and 29.43% (30.11 %), respectively. The
experimentally measured values were used to estimate the amount of solute retained in the rattan samples which
had been treated with such a boric acid-borax mixture and then dried. The further weight losses of the mixture
in treated rattan dried at higher temperatures are presumably attributable to: 1. the volatilization of low molecular
weight rattan components; 2. the volatilization of boric acid in water vapour during drying and 3. the
mechanical loss of permeating liquid during the early stage of drying. Treatments of rattan or other cellulosic
material which involve boric acid in aqueous solution should avoid high temperature drying in order to ensure
optimum retention of boric acid equivalent (BAE)
Quasiharmonic elastic constants corrected for deviatoric thermal stresses
The quasiharmonic approximation (QHA), in its simplest form also called the
statically constrained (SC) QHA, has been shown to be a straightforward method
to compute thermoelastic properties of crystals. Recently we showed that for
non-cubic solids SC-QHA calculations develop deviatoric thermal stresses at
high temperatures. Relaxation of these stresses leads to a series of
corrections to the free energy that may be taken to any desired order, up to
self-consistency. Here we show how to correct the elastic constants obtained
using the SC-QHA. We exemplify the procedure by correcting to first order the
elastic constants of MgSiO-perovskite and MgSiO-post-perovskite, the
major phases of the Earth's lower mantle. We show that this first order
correction is quite satisfactory for obtaining the aggregated elastic averages
of these minerals and their velocities in the lower mantle. This type of
correction is also shown to be applicable to experimental measurements of
elastic constants in situations where deviatoric stresses can develop, such as
in diamond anvil cells.Comment: 4 figures, 1 table, submitted to Phys. Rev. B, July 200
Instances and connectors : issues for a second generation process language
This work is supported by UK EPSRC grants GR/L34433 and GR/L32699Over the past decade a variety of process languages have been defined, used and evaluated. It is now possible to consider second generation languages based on this experience. Rather than develop a second generation wish list this position paper explores two issues: instances and connectors. Instances relate to the relationship between a process model as a description and the, possibly multiple, enacting instances which are created from it. Connectors refers to the issue of concurrency control and achieving a higher level of abstraction in how parts of a model interact. We believe that these issues are key to developing systems which can effectively support business processes, and that they have not received sufficient attention within the process modelling community. Through exploring these issues we also illustrate our approach to designing a second generation process language.Postprin
Revised experimental upper limit on the electric dipole moment of the neutron
We present for the first time a detailed and comprehensive analysis of the experimental results that set the current world sensitivity limit on the magnitude of the electric dipole moment (EDM) of the neutron. We have extended and enhanced our earlier analysis to include recent developments in the understanding of the effects of gravity in depolarizing ultracold neutrons; an improved calculation of the spectrum of the neutrons; and conservative estimates of other possible systematic errors, which are also shown to be consistent with more recent measurements undertaken with the apparatus. We obtain a net result of dn=−0.21±1.82×10−26 e cm, which may be interpreted as a slightly revised upper limit on the magnitude of the EDM of 3.0×10−26 e cm (90% C.L.) or 3.6×10−26 e cm (95% C.L.)
Gravitational depolarization of ultracold neutrons: comparison with data
We compare the expected effects of so-called gravitationally enhanced depolarization of ultracold neutrons to measurements carried out in a spin-precession chamber exposed to a variety of vertical magnetic-field gradients. In particular, we have investigated the dependence upon these field gradients of spin-depolarization rates and also of shifts in the measured neutron Larmor precession frequency. We find excellent qualitative agreement, with gravitationally enhanced depolarization accounting for several previously unexplained features in the data
Ion acceleration and plasma jet formation in ultra-thin foils undergoing expansion and relativistic transparency
At sufficiently high laser intensities, the rapid heating to relativistic velocities and resulting decompression of plasma electrons in an ultra-thin target foil can result in the target becoming relativistically transparent to the laser light during the interaction. Ion acceleration in this regime is strongly affected by the transition from an opaque to a relativistically transparent plasma. By spatially resolving the laser-accelerated proton beam at near-normal laser incidence and at an incidence angle of 30°, we identify characteristic features both experimentally and in particle-in-cell simulations which are consistent with the onset of three distinct ion acceleration mechanisms: sheath acceleration; radiation pressure acceleration; and transparency-enhanced acceleration. The latter mechanism occurs late in the interaction and is mediated by the formation of a plasma jet extending into the expanding ion population. The effect of laser incident angle on the plasma jet is explored
Holographic two-point functions for 4d log-gravity
We compute holographic one- and two-point functions of critical
higher-curvature gravity in four dimensions. The two most important operators
are the stress tensor and its logarithmic partner, sourced by ordinary massless
and by logarithmic non-normalisable gravitons, respectively. In addition, the
logarithmic gravitons source two ordinary operators, one with spin-one and one
with spin-zero. The one-point function of the stress tensor vanishes for all
Einstein solutions, but has a non-zero contribution from logarithmic gravitons.
The two-point functions of all operators match the expectations from a
three-dimensional logarithmic conformal field theory.Comment: 35 pages; v2: typos corrected, added reference; v3: shorter
introduction, minor changes in the text in section 3, added reference;
published versio
Measurement of the permanent electric dipole moment of the neutron
We present the result of an experiment to measure the electric dipole moment EDM) of the neutron at the Paul Scherrer Institute using Ramsey's method of separated oscillating magnetic fields with ultracold neutrons (UCN). Our measurement stands in the long history of EDM experiments probing physics violating time reversal invariance. The salient features of this experiment
were the use of a Hg-199 co-magnetometer and an array of optically pumped cesium vapor magnetometers to cancel and correct for magnetic field changes. The statistical analysis was performed on blinded datasets by two separate groups while the estimation of systematic effects profited from an
unprecedented knowledge of the magnetic field. The measured value of the neutron EDM is d_{\rm n} = (0.0\pm1.1_{\rm stat}\pm0.2_{\rmsys})\times10^{-26}e\,{\rm cm}
- …