1,651 research outputs found

    Distinctiveness of long-term pain that does not interfere with life: an observational cohort study.

    Get PDF
    BACKGROUND: Reporting of pain that does not interfere with life is common in the older population but little is known about people with such long-term non-interfering pain. OBJECTIVES: To assess whether non-interfering pain can be a long-term state, and to compare this group with those who continuously report no pain, and with those with chronic pain that interferes with life. METHODS: This was a prospective general population cohort study set within the North Staffordshire Osteoarthritis Project (NorStOP). People aged 50 plus were sent baseline, 3-year and 6-year questionnaires. Those who reported the same pain status (no pain, non-interfering pain, interfering pain) at each time point were compared on pain intensity, widespread pain and medication, and on sociodemographic and co-morbid characteristics at 6 years. RESULTS: Forty percent of responders reported the same pain status at each time point; 12% reported long-term non-interfering pain. Fifty-nine percent of those with non-interfering pain reported at least one site of high pain intensity, 33% reported widespread pain, and 90% had used pain medication in the past 4 weeks. This group was similar to the no-pain group but distinct on sociodemographic and co-morbid measures from those with pain that interfered. CONCLUSIONS: Long-term non-interfering pain is common, but despite often suffering from high pain intensity and widespread pain, those within this group seem to be able to control their pain without allowing it to affect their everyday lives. Future work is needed to assess how people with long-term pain ensure it does not cause interference with life

    A ubiquitous amino acid source for prokaryotic and eukaryotic cell-free transcription-translation systems

    Get PDF
    Cell-free gene expression (CFE) systems are an attractive tool for engineering within synthetic biology and for industrial production of high-value recombinant proteins. CFE reactions require a cell extract, energy system, amino acids, and DNA, to catalyse mRNA transcription and protein synthesis. To provide an amino acid source, CFE systems typically use a commercial standard, which is often proprietary. Herein we show that a range of common microbiology rich media (i.e., tryptone, peptone, yeast extract and casamino acids) unexpectedly provide an effective and low-cost amino acid source. We show that this approach is generalisable, by comparing batch variability and protein production in the following range of CFE systems: Escherichia coli (Rosetta™ 2 (DE3), BL21(DE3)), Streptomyces venezuelae and Pichia pastoris. In all CFE systems, we show equivalent or increased protein synthesis capacity upon replacement of the commercial amino acid source. In conclusion, we suggest rich microbiology media provides a new amino acid source for CFE systems with potential broad use in synthetic biology and industrial biotechnology applications

    Observation of An Evolving Magnetic Flux Rope Prior To and During A Solar Eruption

    Full text link
    Explosive energy release is a common phenomenon occurring in magnetized plasma systems ranging from laboratories, Earth's magnetosphere, the solar corona and astrophysical environments. Its physical explanation is usually attributed to magnetic reconnection in a thin current sheet. Here we report the important role of magnetic flux rope structure, a volumetric current channel, in producing explosive events. The flux rope is observed as a hot channel prior to and during a solar eruption from the Atmospheric Imaging Assembly (AIA) telescope on board the Solar Dynamic Observatory (SDO). It initially appears as a twisted and writhed sigmoidal structure with a temperature as high as 10 MK and then transforms toward a semi-circular shape during a slow rise phase, which is followed by fast acceleration and onset of a flare. The observations suggest that the instability of the magnetic flux rope trigger the eruption, thus making a major addition to the traditional magnetic-reconnection paradigm.Comment: 13 pages, 3 figure

    Ammonium tetrathiomolybdate following ischemia/reperfusion injury: Chemistry, pharmacology, and impact of a new class of sulfide donor in preclinical injury models

    Get PDF
    Background: Early revascularization of ischemic organs is key to improving outcomes, yet consequent reperfusion injury may be harmful. Reperfusion injury is largely attributed to excess mitochondrial production of reactive oxygen species (ROS). Sulfide inhibits mitochondria and reduces ROS production. Ammonium tetrathiomolybdate (ATTM), a copper chelator, releases sulfide in a controlled and novel manner, and may offer potential therapeutic utility. Methods and findings: In vitro, ATTM releases sulfide in a time-, pH-, temperature-, and thiol-dependent manner. Controlled sulfide release from ATTM reduces metabolism (measured as oxygen consumption) both in vivo in awake rats and ex vivo in skeletal muscle tissue, with a superior safety profile compared to standard sulfide generators. Given intravenously at reperfusion/resuscitation to rats, ATTM significantly reduced infarct size following either myocardial or cerebral ischemia, and conferred survival benefit following severe hemorrhage. Mechanistic studies (in vitro anoxia/reoxygenation) demonstrated a mitochondrial site of action (decreased MitoSOX fluorescence), where the majority of damaging ROS is produced. Conclusions: The inorganic thiometallate ATTM represents a new class of sulfide-releasing drugs. Our findings provide impetus for further investigation of this compound as a novel adjunct therapy for reperfusion injury

    Impact of the June 2018 Saddleworth Moor wildfires on air quality in northern England

    Get PDF
    The June 2018 Saddleworth Moor fires were some of the largest UK wildfires on record and lasted for approximately three weeks. They emitted large quantities of smoke, trace gases and aerosols which were transported downwind over the highly populated regions of Manchester and Liverpool. Surface observations of PM2.5 indicate that concentrations were 4–5.5 times higher than the recent seasonal average. State-of-the-art satellite measurements of total column carbon monoxide (TCCO) from the TROPOMI instrument on the Sentinel 5—Precursor (S5P) platform, coupled with measurements from a flight of the UK BAe-146–301 research aircraft, are used to quantify the substantial enhancement in emitted trace gases. The aircraft measured plume enhancements with near-fire CO and PM2.5 concentrations >1500 ppbv and >125 μg m−3 (compared to ~100 ppbv and ~5 μg m−3 background concentrations). Downwind fire-plume ozone (O3) values were larger than the near-fire location, indicating O3 production with distance from source. The near-fire O3:CO ratio was (ΔO3/ΔCO) 0.001 ppbv/ppbv, increasing downwind to 0.060–0.105 ppbv/ppbv, suggestive of O3 production enhancement downwind of the fires. Emission rates of CO and CO2 ranged between 1.07 (0.07–4.69) kg s−1 and 13.7 (1.73–50.1) kg s−1, respectively, similar to values expected from a medium sized power station

    The Surgical Infection Society revised guidelines on the management of intra-abdominal infection

    Get PDF
    Background: Previous evidence-based guidelines on the management of intra-abdominal infection (IAI) were published by the Surgical Infection Society (SIS) in 1992, 2002, and 2010. At the time the most recent guideline was released, the plan was to update the guideline every five years to ensure the timeliness and appropriateness of the recommendations. Methods: Based on the previous guidelines, the task force outlined a number of topics related to the treatment of patients with IAI and then developed key questions on these various topics. All questions were approached using general and specific literature searches, focusing on articles and other information published since 2008. These publications and additional materials published before 2008 were reviewed by the task force as a whole or by individual subgroups as to relevance to individual questions. Recommendations were developed by a process of iterative consensus, with all task force members voting to accept or reject each recommendation. Grading was based on the GRADE (Grades of Recommendation Assessment, Development, and Evaluation) system; the quality of the evidence was graded as high, moderate, or weak, and the strength of the recommendation was graded as strong or weak. Review of the document was performed by members of the SIS who were not on the task force. After responses were made to all critiques, the document was approved as an official guideline of the SIS by the Executive Council. Results: This guideline summarizes the current recommendations developed by the task force on the treatment of patients who have IAI. Evidence-based recommendations have been made regarding risk assessment in individual patients; source control; the timing, selection, and duration of antimicrobial therapy; and suggested approaches to patients who fail initial therapy. Additional recommendations related to the treatment of pediatric patients with IAI have been included. Summary: The current recommendations of the SIS regarding the treatment of patients with IAI are provided in this guideline

    Synthesis and characterisation of lamellar ZnS nanosheets containing intercalated diamines

    Get PDF
    A solvothermal method has been used to preparehybrid inorganic-organic composites with a lamellar structure in which layers of wurtzite ZnS are separated by intercalated diamine molecules. A hybrid composite prepared with diethylenetriamine has been isolated and characterisedand its structure and properties compared with those of the composite prepared using ethylenediamine. Comparative structural and morphological studies of the two lamellar hybrid composites are described on the basis of powder XRD, electron and scanning probe microscopies and thermal analysis of the materials

    A Landscape and Climate Data Logistic Model of Tsetse Distribution in Kenya

    Get PDF
    , biologically transmitted by the tsetse fly in Africa, are a major cause of illness resulting in both high morbidity and mortality among humans, cattle, wild ungulates, and other species. However, tsetse fly distributions change rapidly due to environmental changes, and fine-scale distribution maps are few. Due to data scarcity, most presence/absence estimates in Kenya prior to 2000 are a combination of local reports, entomological knowledge, and topographic information. The availability of tsetse fly abundance data are limited, or at least have not been collected into aggregate, publicly available national datasets. Despite this limitation, other avenues exist for estimating tsetse distributions including remotely sensed data, climate information, and statistical tools.Here we present a logistic regression model of tsetse abundance. The goal of this model is to estimate the distribution of tsetse fly in Kenya in the year 2000, and to provide a method by which to anticipate their future distribution. Multiple predictor variables were tested for significance and for predictive power; ultimately, a parsimonious subset of variables was identified and used to construct the regression model with the 1973 tsetse map. These data were validated against year 2000 Food and Agriculture Organization (FAO) estimates. Mapcurves Goodness-Of-Fit scores were used to evaluate the modeled fly distribution against FAO estimates and against 1973 presence/absence data, each driven by appropriate climate data.Logistic regression can be effectively used to produce a model that projects fly abundance under elevated greenhouse gas scenarios. This model identifies potential areas for tsetse abandonment and expansion
    corecore