In situ mass analysis of particles by surface ionization mass spectrometry

A qualitative study of the application of surface ionization and mass spectrometry to the in situ detection and constituent analysis of atmospheric particles was conducted. The technique consists of mass analysis of ions formed as a result of impingement of a stream of particles on a hot filament where, it is presumed, surface ionization takes place. Laboratory air particles containing K, Ca, and possibly hydrocarbons were detected. Other known particles such as Al2O3, Pb(NO3)2, and Cr2O3 were analyzed by detecting the respective metal atoms making up the particles. In some cases, mass numbers indicative of compounds making up the particles were detected showing surface ionization of particles sometimes leads to chemical analysis as well as to elemental analysis. Individual particles were detected, and it was shown that the technique is sensitive to Al2O3 particles with a mass of a few nanograms

Towards Quantifying Beneficial System Effects in Cold-Formed Steel Wood-Sheathed Floor Diaphragms

Cold-formed steel wood-sheathed floor diaphragm system behavior is analyzed from a system reliability perspective. Floor systems consisting of oriented strand board (OSB), cold-formed steel (CFS) joists, tracks and screw fasteners are modeled using shell and spring elements in ABAQUS. (Dassault-Systems ())The models consider typical seismic demand loads, with careful treatment of light steel framing diaphragm boundary conditions and OSB sheathing kinematics, i.e., two sheets pulling apart or bearing against each other at an ultimate limit state, consistent with existing experimental results. The finite element results are used to build surrogate mathematical idealizations (series, parallel-brittle and parallel-ductile) for the critical system components. System reliability and reliability sensitivity, defined as the derivative of system reliability with respect to component reliability, are studied for these idealizations. These results represent mathematical upper and lower bounds to real system behavior, and are being used in ongoing research to codify beneficial diaphragm system effects

Polar cap patch segmentation of the tongue of ionization in the morning convection cell

Two types of poleward moving plasma concentration enhancements (PMPCEs) were observed during a sequence of pulsed reconnection events, both in the morning convection cell: Type L (low density) was associated with a cusp flow channel and seems likely to have been produced by ionization associated with particle precipitation, while Type H (high density) appeared to originate from the segmentation of the tongue of ionization by the processes which produced the Type L events. As a result, the Type L and Type H PMPCEs were interspersed, producing a complex density structure which underlines the importance of cusp flow channels as a mechanism for segmenting and structuring electron density in the cusp and shows the necessity of differentiating between at least two classes of electron density patches

Modeling peer effect modification by network strength: The diffusion of implantable cardioverter defibrillators in the US hospital network

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/154422/1/sim8466.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/154422/2/sim8466_am.pd

Digestion of timothy silage and hay in reindeer

Leafy timothy (Phleum pratense) silage (S), silage mixed with molasses (SM) and hay (H) were fed to nine male reindeer (Rangifer tarandus tarandus) calves in winter to investigate rumen function and digestion. Three calves were given S with 18.5% dry matter (DM), three were given SM (21.9% DM) and three were given H (85.0% DM). The content of water soluble carbohydrates (in % of DM) was 8.2% in S, 16.0% in SM and 8.5% in H. Median (range) daily DM food intake per kg BM was 12.9 (9-2-14.4) g in calves fed S, 19.0 (19-0-21.9) g in calves fed SM and 21.0 (19.2¬21.1) g in calves fed H. In vivo digestion of S and SM DM ranged from 78.5-83.1% compared to only 69-9-72.9% in calves fed H. In vitro DM digestion (IVDMD) of cellulose (median) incubated for 48 hours in rumen fluid was, however, significantly (F = 0.05) lower in calves fed S (24.4%) compared to calves fed SM (42.2%). Median IVDMD of cellulose (48 hours) in calves fed H was 36.4%. Total concentration of VFA (range) in the rumen fluid from reindeer fed H (99.7-113.6 mM) and was significantly (P<0.05) higher compared to animals fed S (57.7-85.9 mM) or SM (51.4-72.0 mM). Likewise, the pH of the rumen fluid (range) was significantly (P<0.05) lower in reindeer fed H (6.40-6.78) compared to animals fed S (6.97-7.30) or SM (6.79-7.27). Based on this study it is concluded that leafy timothy preserved as hay seems to be more suitable as emergency feed compared to silage. Supplementation of molasses to silage seems to stimulate food intake and ruminal cellulose digestion in reindeer. The lower intake of S compared to SM or H by reindeer may be explained by ruminal energy deficiency

CURRENT - A Computer Code for Modeling Two-Dimensional, Chemically Reaccting, Low Mach Number Flows

This report documents CURRENT, a computer code for modeling two- dimensional, chemically reacting, low Mach number flows including the effects of surface chemistry. CURRENT is a finite volume code based on the SIMPLER algorithm. Additional convergence acceleration for low Peclet number flows is provided using improved boundary condition coupling and preconditioned gradient methods. Gas-phase and surface chemistry is modeled using the CHEMKIN software libraries. The CURRENT user-interface has been designed to be compatible with the Sandia-developed mesh generator and post processor ANTIPASTO and the post processor TECPLOT. This report describes the theory behind the code and also serves as a user`s manual

Experimental Research on the Shear Connectors in Foam Concrete

In order to improve the longitudinal shear resistance between foam concrete and C-Channels, an investigation is carried out on the shear connectors in foam concrete with cold-formed steel double C-Channels embedment. Twenty-four tests have been carried out in two groups. Two types of connectors: flange connectors and web connectors are installed using self-drilling screws for a rapid construction. The experimental results show that they can effectively improve the longitudinal shear-resist capacity of the concrete. After the experiment, the specimens are dismantled for an interior observation. Based on the observation, the form of damage, the failure mechanism was discovered, and the equation of longitudinal shear capacity was developed. It is concluded that the failure involves independent slippage between two C-Channels and the shear connection fractures. Since the composite structure requires sufficient slip between the two materials, these types of shear connectors will have good enhancement for this type of composite structures subjected to dynamic loads

A Dense SNP-Based Linkage Map for Atlantic Salmon (Salmo salar) Reveals extended Chromosome Homeologies and Striking Differences in Sex-Specific Recombination Patterns

Background: The Atlantic salmon genome is in the process of returning to a diploid state after undergoing awhole genome duplication (WGD) event between 25 and100 million years ago. Existing data on the proportion ofparalogous sequence variants (PSVs), multisite variants (MSVs) and other types of complex sequence variationsuggest that the rediplodization phase is far from over. The aims of this study were to construct a high densitylinkage map for Atlantic salmon, to characterize the extent of rediploidization and to improve our understandingof genetic differences between sexes in this species.Results: A linkage map for Atlantic salmon comprising 29 chromosomes and 5650 single nucleotidepolymorphisms (SNPs) was constructed using genotyping data from 3297 fish belonging to 143 families. Of these,2696 SNPs were generated from ESTs or other gene associated sequences. Homeologous chromosomal regionswere identified through the mapping of duplicated SNPs and through the investigation of syntenic relationshipsbetween Atlantic salmon and the reference genome sequence of the threespine stickleback (Gasterosteusaculeatus). The sex-specific linkage maps spanned a total of 2402.3 cM in females and 1746.2 cM in males,highlighting a difference in sex specific recombination rate (1.38:1) which is much lower than previously reportedin Atlantic salmon. The sexes, however, displayed striking differences in the distribution of recombination siteswithin linkage groups, with males showing recombination strongly localized to telomeres.Conclusion: The map presented here represents a valuable resource for addressing important questions of interestto evolution (the process of re-diploidization), aquaculture and salmonid life history biology and not least as aresource to aid the assembly of the forthcoming Atlantic salmon reference genome sequence

Tempo and mode of performance evolution across multiple independent origins of adhesive toe pads in lizards

Understanding macroevolutionary dynamics of trait evolution is an important endeavor in evolutionary biology. Ecological opportunity can liberate a trait as it diversifies through trait space, while genetic and selective constraints can limit diversification. While many studies have examined the dynamics of morphological traits, diverse morphological traits may yield the same or similar performance and as performance is often more proximately the target of selection, examining only morphology may give an incomplete understanding of evolutionary dynamics. Here, we ask whether convergent evolution of pad‐bearing lizards has followed similar evolutionary dynamics, or whether independent origins are accompanied by unique constraints and selective pressures over macroevolutionary time. We hypothesized that geckos and anoles each have unique evolutionary tempos and modes. Using performance data from 59 species, we modified Brownian motion (BM) and Ornstein–Uhlenbeck (OU) models to account for repeated origins estimated using Bayesian ancestral state reconstructions. We discovered that adhesive performance in geckos evolved in a fashion consistent with Brownian motion with a trend, whereas anoles evolved in bounded performance space consistent with more constrained evolution (an Ornstein–Uhlenbeck model). Our results suggest that convergent phenotypes can have quite distinctive evolutionary patterns, likely as a result of idiosyncratic constraints or ecological opportunities