23 research outputs found
Optimization of micro and nano palm oil fuel ash to determine the carbonation resistance of the concrete in accelerated condition
The carbonation rate of reinforced concrete is influenced by three parameters, namely temperature, relative humidity, and concentration of carbon dioxide (CO2) in the surroundings. As knowledge of the service lifespan of reinforced concrete is crucial in terms of corrosion, the carbonation process is important to study, and high-performance durable reinforced concretes can be produced to prolong the effects of corrosion. To examine carbonation resistance, accelerated carbonation testing was conducted in accordance with the standards of BS 1881-210:2013. In this study, 10-30% of micro palm oil fuel ash (mPOFA) and 0.5-1.5% of nano-POFA (nPOFA) were incorporated into concrete mixtures to determine the optimum amount for achieving the highest carbonation resistance after 28 days water curing and accelerated CO2 conditions up to 70 days of exposure. The effect of carbonation on concrete specimens with the inclusion of mPOFA and nPOFA was investigated. The carbonation depth was identified by phenolphthalein solution. The highest carbonation resistance of concrete was found after the inclusion of 10% mPOFA and 0.5% nPOFA, while the lowest carbonation resistance was found after the inclusion of 30% mPOFA and 1.5% nPOFA
Safety and Immunogenicity of a Malaria Vaccine, Plasmodium falciparum AMA-1/MSP-1 Chimeric Protein Formulated in Montanide ISA 720 in Healthy Adults
The P. falciparum chimeric protein 2.9 (PfCP-2.9) consisting of the sequences of MSP1-19 and AMA-1 (III) is a malaria vaccine candidate that was found to induce inhibitory antibodies in rabbits and monkeys. This was a phase I randomized, single-blind, placebo-controlled, dose-escalation study to evaluate the safety and immunogenicity of the PfCP-2.9 formulated with a novel adjuvant Montanide ISA720. Fifty-two subjects were randomly assigned to 4 dose groups of 10 participants, each receiving the test vaccine of 20, 50, 100, or 200 µg respectively, and 1 placebo group of 12 participants receiving the adjuvant only.The vaccine formulation was shown to be safe and well-tolerated, and none of the participants withdrew. The total incidence of local adverse events (AEs) was 75%, distributed among 58% of the placebo group and 80% of those vaccinated. Among the vaccinated, 65% had events that were mild and 15% experienced moderate AEs. Almost all systemic adverse reactions observed in this study were graded as mild and required no therapy. The participants receiving the test vaccine developed detectable antibody responses which were boosted by the repeated vaccinations. Sixty percent of the vaccinated participants had high ELISA titers (>1∶10,000) of antigen-specific antibodies which could also recognize native parasite proteins in an immunofluorescence assay (IFA).This study is the first clinical trial for this candidate and builds on previous investigations supporting PfCP-2.9/ISA720 as a promising blood-stage malaria vaccine. Results demonstrate safety, tolerability (particularly at the lower doses tested) and immunogenicity of the formulation. Further clinical development is ongoing to explore optimizing the dose and schedule of the formulation to decrease reactogenicity without compromising immunogenicity.
Rasiowa–Sikorski deduction systems in computer science applications
AbstractA Rasiowa-Sikorski system is a sequence-type formalization of logics. The system uses invertible decomposition rules which decompose a formula into sequences of simpler formulae whose validity is equivalent to validity of the original formula. There may also be expansion rules which close indecomposable sequences under certain properties of relations appearing in the formulae, like symmetry or transitivity. Proofs are finite decomposition trees with leaves having “fundamental”, valid labels. The author describes a general method of applying the R-S formalism to develop complete deduction systems for various brands of C.S and A.I. logic, including a logic for reasoning about relative similarity, a three-valued software specification logic with McCarthy's connectives and Kleene quantifiers, a logic for nondeterministic specifications, many-sorted FOL with possibly empty carriers of some sorts, and a three-valued logic for reasoning about concurrency
Current status of the algae production industry in Europe: an emerging sector of the Blue Bioeconomy
Versión del edito
Physicochemical and thermal characterization of hydroxyethyl cellulose - wheat starch based films incorporated thymol intended for active packaging
Biodegradable packing materials with antimicrobial properties have been a concern for years because of its positive environmental implications. The present work aimed to develop the formulation of hydroxyethyl cellulose (HEC)/wheat-starch based film in which the active compound, thymol (0.5, 1, 1.5, 2, and 2.5% w/w) were incorporated into the polymeric material. Solution casting method was used for the film preparation while thymol was incorporated prior to casting. The physical and chemical properties of the developed film were determined. SEM was found to have a smooth and homogeneous with a small amount of thymol which grows coarser with 1.5% or higher thymol content. FTIR was used to find the chemical property of the film and suggested that the carbonyl functional group was unchanged in the film, however, -OH groups increased substantially with increased amount of thymol. Thermal properties were profiled through thermogravimetric analysis and differential scanning calorimeter where the AM film containing 1.5% (w/v) of thymol shows the highest thermal stability and decomposes less in comparison to other samples. The inhibitory capability of the film was tested against a list of microbial contamination and was found to successfully inhibit the growth of selected gram positive and gram negative bacteria in a wide range of studied concentration. The mechanical properties of the films were improved by 60.3% with an optimum tensile strength at thymol concentration of 1.5% w/w. It can be concluded that the film properties are retained chemically whereas mechanical properties, strength, flexibility and function of the film are being enhanced remarkably by the incorporation of thymol
Physicochemical and thermal characterization of hydroxyethyl cellulose - wheat starch based films incorporated thymol intended for active packaging
Biodegradable packing materials with antimicrobial properties have been a concern for years because of its positive environmental implications. The present work aimed to develop the formulation of hydroxyethyl cellulose (HEC)/wheat-starch based film in which the active compound, thymol (0.5, 1, 1.5, 2, and 2.5% w/w) were incorporated into the polymeric material. Solution casting method was used for the film preparation while thymol was incorporated prior to casting. The physical and chemical properties of the developed film were determined. SEM was found to have a smooth and homogeneous with a small amount of thymol which grows coarser with 1.5% or higher thymol content. FTIR was used to find the chemical property of the film and suggested that the carbonyl functional group was unchanged in the film, however, -OH groups increased substantially with increased amount of thymol. Thermal properties were profiled through thermogravimetric analysis and differential scanning calorimeter where the AM film containing 1.5% (w/v) of thymol shows the highest thermal stability and decomposes less in comparison to other samples. The inhibitory capability of the film was tested against a list of microbial contamination and was found to successfully inhibit the growth of selected gram positive and gram negative bacteria in a wide range of studied concentration. The mechanical properties of the films were improved by 60.3% with an optimum tensile strength at thymol concentration of 1.5% w/w. It can be concluded that the film properties are retained chemically whereas mechanical properties, strength, flexibility and function of the film are being enhanced remarkably by the incorporation of thymol
Predictive modeling of the compressive strength of bacteria-incorporated geopolymer concrete using a gene expression programming approach
The performance of gene expression programming (GEP) in predicting the compressive strength of bacteriaincorporated geopolymer concrete (GPC) was examined in this study. Ground-granulated blast-furnace slag (GGBS), new bacterial strains, fly ash (FA), silica fume (SF), metakaolin (MK), and manufactured sand were used as ingredients in the concrete mixture. For the geopolymer preparation, an 8 M sodium hydroxide (NaOH) solution was used, and the ambient curing temperature (28oC) was maintained for all mixtures. The ratio of sodium silicate (Na2SiO3) to NaOH was 2.33, and the ratio of alkaline liquid to binder was 0.35. Based on experimental data collected from the literature, an evolutionary-based algorithm (GEP) was proposed to develop new predictive models for estimating the compressive strength of GPC containing bacteria. Data were classified into training and testing sets to obtain a closed-form solution using GEP. Independent variables for the model were the constituent materials of GPC, such as FA, MK, SF, and Bacillus bacteria. A total of six GEP formulations were developed for predicting the compressive strength of bacteria-incorporated GPC obtained at 1, 3, 7, 28, 56, and 90 days of curing. 80% and 20% of the data were used for training and testing the models, respectively. R2 values in the range of 0.9747 and 0.9950 (including train and test dataset) were obtained for the concrete samples, which showed that GEP can be used to predict the compressive strength of GPC containing bacteria with minimal error. Moreover, the GEP models were in good agreement with the experimental datasets and were robust and reliable. The models developed could serve as a tool for concrete constructors using geopolymers within the framework of this research