36 research outputs found
Some remarks on particle size effects on the abrasion of a range of Fe based alloys
The low-stress three body abrasion behaviour of a range of steels was investigated. The tests were carried out in a rubber wheel tester (according to ASTM G65-94, reapproved in 2000) at room temperature. The abrasive particles used were angular alumina particles of four different sizes. The results showed that, in general, the smaller particles (50 8m and 125 8m average size) caused more damage. With these particles, observations of surface morphology indicarted a more intense cutting and ploughing action, leading to more damage, whereas bigger particles i.e. larger 250 8m and 560 8m particles produced less damage, and their action involved more plastic deformation type wear. The 304 SS had a lower abrasion resistance than the 310 SS. For the austentic and ferritic steels the subsurface deformation was larger for impact with the coarser particles. Variations in substrate hardness had no effect on the abrasive behaviour observed. On the whole, the hardest steel (mild steel in martensitic condition) showed the higher extent of damage, irrespective of particle size
Application of Model-driven engineering to multi-agent systems: a language to model behaviors of reactive agents
Many users of multi-agent systems (MAS) are very commonly disinclined to model and simulate using current MAS platforms. More specifically, modeling the dynamics of a system (in particular the agents' behaviors) is very often a challenge to MAS users. This issue is more often observed in the domain of socio-ecological systems (SES), because SES domain experts are rarely programmers. Indeed, the majority of MAS platforms were not conceived taking into consideration domain-experts who are non-programmers. Most current MAS tools are not dedicated to SES, or nor do they possess an easily understandable formalism to represent the behaviors of agents. Moreover, because it is platform-dependent, a model realized in a given MAS platform cannot be properly used on another platform due to incompatibility between MAS platforms. To overcome these limitations, we propose a domain-specific language (DSL) to describe the behaviors of reactive agents, regardless of the MAS platform used for simulation. To achieve this result, we used model-driven engineering (MDE), an approach that provides tools to develop DSLs from a meta-model (abstract syntax), textual editors with syntax highlighting (for the concrete syntax) and code generation capabilities (for source-code generation of a model). As a result, we implemented a language and a textual editor that allow SES domain experts to describe behaviors in three different ways that are close to their natural expression: as equations when they are familiar with these, as a sequence of activities close to natural language or as an activity diagram to represent decisions and a sequence of behaviors using a graphic formalism. To demonstrate interoperability, we also developed code generators targeting two different MAS platforms (Cormas and Netlogo). We tested the code generators by implementing two SES models with the developed DSL. The generated code was targeted to both MAS platforms (Cormas and Netlogo), and successfully simulated in one of them. We conclude that the MDE approach provides adequate tools to develop DSL and code generators to facilitate MAS modeling and simulation by non-programmers. Concerning the DSL developed, although the behavioral aspect of MAS simulation is part of the complexity of modeling in MAS, there are still other essential aspects of model and simulation of MAS that are yet to be explored, such as model initialization and points of view on the model simulated worl
High-Temperature Oxidation of Superalloy C-263 of Rings for Aircraft Engines
The present investigation was conducted to study the oxidation kinetics of nickel-based superalloy 263, used in the manufacture of rings for aircraft engines. For carrying out this study, we first conducted microstructural characterization of the pieces using the techniques of optical microscopy, scanning electronic microscopy, and X-ray diffraction. Subsequently, using the thermogravimetric analysis, the kinetic oxidation of the metal was performed in a temperature range between 700 and 1000°C, using atmospheres of O2. The results of the micrographs show the formation of a protective oxide film on the surface of the material in different oxidizing agents. Finally, it was found that the kinetics of high-temperature oxidation of the superalloy C-263 obeys the parabolic rate law
Differences in clinical features and mortality in very old unvaccinated patients (≥ 80 years) hospitalized with COVID-19 during the first and successive waves from the multicenter SEMI-COVID-19 Registry (Spain)
Background: Old age is one of the most important risk factors for severe COVID-19. Few studies have analyzed changes in the clinical characteristics and prognosis of COVID-19 among older adults before the availability of vaccines. This work analyzes differences in clinical features and mortality in unvaccinated very old adults during the first and successive COVID-19 waves in Spain. Methods This nationwide, multicenter, retrospective cohort study analyzes unvaccinated patients >= 80 years hospitalized for COVID-19 in 150 Spanish hospitals (SEMI-COVID-19 Registry). Patients were classified according to whether they were admitted in the first wave (March 1-June 30, 2020) or successive waves (July 1-December 31, 2020). The endpoint was all-cause in-hospital mortality, expressed as the case fatality rate (CFR). Results Of the 21,461 patients hospitalized with COVID-19, 5,953 (27.7%) were >= 80 years (mean age [IQR]: 85.6 [82.3-89.2] years). Of them, 4,545 (76.3%) were admitted during the first wave and 1,408 (23.7%) during successive waves. Patients hospitalized in successive waves were older, had a greater Charlson Comorbidity Index and dependency, less cough and fever, and met fewer severity criteria at admission (qSOFA index, PO2/FiO2 ratio, inflammatory parameters). Significant differences were observed in treatments used in the first (greater use of antimalarials, lopinavir, and macrolides) and successive waves (greater use of corticosteroids, tocilizumab and remdesivir). In-hospital complications, especially acute respiratory distress syndrome and pneumonia, were less frequent in patients hospitalized in successive waves, except for heart failure. The CFR was significantly higher in the first wave (44.1% vs. 33.3%; -10.8%; p = 95 years (54.4% vs. 38.5%; -15.9%; p < 0.001). After adjustments to the model, the probability of death was 33% lower in successive waves (OR: 0.67; 95% CI: 0.57-0.79). Conclusions Mortality declined significantly between the first and successive waves in very old unvaccinated patients hospitalized with COVID-19 in Spain. This decline could be explained by a greater availability of hospital resources and more effective treatments as the pandemic progressed, although other factors such as changes in SARS-CoV-2 virulence cannot be ruled out
Strong Interaction Physics at the Luminosity Frontier with 22 GeV Electrons at Jefferson Lab
This document presents the initial scientific case for upgrading the
Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (JLab)
to 22 GeV. It is the result of a community effort, incorporating insights from
a series of workshops conducted between March 2022 and April 2023. With a track
record of over 25 years in delivering the world's most intense and precise
multi-GeV electron beams, CEBAF's potential for a higher energy upgrade
presents a unique opportunity for an innovative nuclear physics program, which
seamlessly integrates a rich historical background with a promising future. The
proposed physics program encompass a diverse range of investigations centered
around the nonperturbative dynamics inherent in hadron structure and the
exploration of strongly interacting systems. It builds upon the exceptional
capabilities of CEBAF in high-luminosity operations, the availability of
existing or planned Hall equipment, and recent advancements in accelerator
technology. The proposed program cover various scientific topics, including
Hadron Spectroscopy, Partonic Structure and Spin, Hadronization and Transverse
Momentum, Spatial Structure, Mechanical Properties, Form Factors and Emergent
Hadron Mass, Hadron-Quark Transition, and Nuclear Dynamics at Extreme
Conditions, as well as QCD Confinement and Fundamental Symmetries. Each topic
highlights the key measurements achievable at a 22 GeV CEBAF accelerator.
Furthermore, this document outlines the significant physics outcomes and unique
aspects of these programs that distinguish them from other existing or planned
facilities. In summary, this document provides an exciting rationale for the
energy upgrade of CEBAF to 22 GeV, outlining the transformative scientific
potential that lies within reach, and the remarkable opportunities it offers
for advancing our understanding of hadron physics and related fundamental
phenomena.Comment: Updates to the list of authors; Preprint number changed from theory
to experiment; Updates to sections 4 and 6, including additional figure