Demountable Toroidal Field Magnets for Use in a Compact Modular Fusion Reactor

A concept of demountable toroidal field magnets for a compact fusion reactor is discussed. The magnets generate a magnetic field of 9.2 T on axis, in a 3.3 m major radius tokamak. Subcooled YBCO conductors have a critical current density adequate to provide this large magnetic field, while operating at 20 K reduces thermodynamic cooling cost of the resistive electrical joints. Demountable magnets allow for vertical replacement and maintenance of internal components, potentially reducing cost and time of maintenance when compared to traditional sector maintenance. Preliminary measurements of contact resistance of a demountable YBCO electrical joint between are presented

Smaller & Sooner: Exploiting High Magnetic Fields from New Superconductors for a More Attractive Fusion Energy Development Path

The current fusion energy development path, based on large volume moderate magnetic B field devices is proving to be slow and expensive. A modest development effort in exploiting new superconductor magnet technology development, and accompanying plasma physics research at high-B, could open up a viable and attractive path for fusion energy development. This path would feature smaller volume, fusion capable devices that could be built more quickly than low-to-moderate field designs based on conventional superconductors. Fusion’s worldwide development could be accelerated by using several small, flexible devices rather than relying solely on a single, very large device. These would be used to obtain the acknowledged science and technology knowledge necessary for fusion energy beyond achievement of high gain. Such a scenario would also permit the testing of multiple confinement configurations while distributing technical and scientific risk among smaller devices. Higher field and small size also allows operation away from well-known operational limits for plasma pressure, density and current. The advantages of this path have been long recognized—earlier US plans for burning plasma experiments (compact ignition tokamak, burning plasma experiment, fusion ignition research experiment) featured compact high-field designs, but these were necessarily pulsed due to the use of copper coils. Underpinning this new approach is the recent industrial maturity of high-temperature, high-field superconductor tapes that would offer a truly “game changing” opportunity for magnetic fusion when developed into large-scale coils. The superconductor tape form and higher operating temperatures also open up the possibility of demountable superconducting magnets in a fusion system, providing a modularity that vastly improves simplicity in the construction, maintenance, and upgrade of the coils and the internal nuclear engineering components required for fusion’s development. Our conclusion is that while tradeoffs exist in design choices, for example coil, cost and stress limits versus size, the potential physics and technology advantages of high-field superconductors are attractive and they should be vigorously pursued for magnetic fusion’s development

Natural Occurrence of Ochratoxin A in Blood and Milk Samples from Jennies and Their Foals after Delivery

An assessment of the natural ochratoxin A (OTA) exposure of seven Martina Franca jennies was carried out by analyzing blood and milk samples collected close to and after delivery. A total of 41 and 34 blood samples were collected from jennies and foals, respectively, and analyzed by ELISA. A total of 33 milk samples were collected from jennies and analyzed by the HPLC/FLD method based on IAC clean-up. Furthermore, 53 feed samples were collected from January to September and analyzed by a reference method (AOAC Official Method No. 2000.03) for OTA content. Feed samples showed OTA levels up to 2.7 ng/g with an incidence of 32%, while the OTA incidence rate in jennies' blood samples was 73%, with a median value of 97 ng/L and concentrations ranging fro

Managing housing needs in post conflict housing reconstruction in Sri Lanka: gaps versus recommendations

Addressing housing needs in post conflict housing reconstruction leads to successful housing reconstruction. As part of a study of investigating how the housing needs can be effectively addressed in post conflict housing reconstruction, this paper identifies the gaps in managing housing needs in post conflict housing reconstruction within the context of Sri Lanka and presents the recommendations to minimise such gaps. Data was collected through un-structured interviews conducted with 37 participants, comprising policy makers, practitioners, academics and beneficiaries who engaged in post conflict housing reconstruction in Sri Lanka. Gaps were mainly found in conflict sensitivity, measures related to physical housing, performance of implementing agencies, policy and practice issues. On the job training, application of ‘do no harm’ principles, enhanced beneficiary participation, enhanced accountability, effective monitoring, enhanced knowledge sharing, adequate drinking water facilities, irrigation development and initiatives for material manufacturing were suggested as recommendations to minimise these gaps. Identification of gaps in managing housing needs in post conflict housing reconstruction and recommendations to minimise them inform policy makers to address the housing needs effectively through incorporating these aspects into the related policies. This in turn enhances the sustainability in housing development after conflicts

A new combined protocol to treat the dentin hypersensitivity associated with non-carious cervical lesions: A randomized controlled trial

The goal of this research is to assess the desensitizing effect of a diode laser on noncarious cervical lesions (NCCLs) responsible for dentin hypersensitivity (DH) in two separate output forces implemented both independently and in sequential combination modalities. A randomized controlled trial for this study was applied. Sixty-nine NCCLs responsible for DH pain with severity between 6 and 9 on the VAS scale were considered. Three study groups were developed using just one lesion from three different quadrants of the oral cavity of each patient. All treatment procedures were conducted using a laser diode (810 nm, 5 W) with varying power outputs used separately or in combination. The pain by DH was evaluated at baseline, at treatment completion, and at 15 days and 3 months after each laser procedure. Data analysis was performed using a Wilcoxon test for paired samples, a one-way ANOVA test, and an unpaired t-test. The significant reduction of the mean VAS score was estimated in each study group immediately and at 15 days and 3 months after the end of treatment and compared with the baseline mean VAS score (p-value < 0.0001). The best result concerning the improvement of DH symptomatology was assessed when a combined protocol of two different output powers of the diode laser was used. The authors conclude that the diode laser (810 nm) therapy procedure combining two separate output forces (low and high power) can improve the painful symptoms of DH from NCCLs

Design of a superconducting magnetic shield closed on both ends for a high-sensitivity particle detector

peer reviewedThis work deals with the numerical design of a high-efficiency superconducting magnetic shield required for a high-sensitivity particle detector. This research was carried out in the context of the ‘ABRACADABRA’ project aiming at detecting hypothetical elementary particles called axions. Axions are promising candidates to explain the particle nature of the dark matter. The detector relies on a SQUID for measuring the ultra-small oscillating magnetic field resulting from the interaction between the axions and a toroidal DC field. A magnetic shield is mandatory to reduce the ambient magnetic field noise. Given the operating temperature (~ 1.2 K), the shield is made of type-I superconductor. In this work we use numerical modelling to determine the best topology for the shield and its ability to screen both axial and transverse fields. Amongst the geometries investigated (tubes or ‘swiss-rolls’ closed on both ends) the best results are obtained with two semi-closed tubes inserted in one another. This geometry is close to the shield of the final prototype, made of two closed Cu tubes, spin-coated with Sn (Tc = 3.72 K) and welded shut