1,001 research outputs found

    Design and fabrication of chemically robust three-dimensional microfluidic valves

    Get PDF
    A current problem in microfluidics is that poly(dimethylsiloxane) (PDMS), used to fabricate many microfluidic devices, is not compatible with most organic solvents. Fluorinated compounds are more chemically robust than PDMS but, historically, it has been nearly impossible to construct valves out of them by multilayer soft lithography (MSL) due to the difficulty of bonding layers made of non-stick fluoropolymers necessary to create traditional microfluidic valves. With our new three-dimensional (3D) valve design we can fabricate microfluidic devices from fluorinated compounds in a single monolithic layer that is resistant to most organic solvents with minimal swelling. This paper describes the design and development of 3D microfluidic valves by molding of a perfluoropolyether, termed Sifel, onto printed wax molds. The fabrication of Sifel-based microfluidic devices using this technique has great potential in chemical synthesis and analysis

    Low field extension for magnetometers (TinyBee) used for investigations on low-dimensional superconductors with Bc1 < 5G

    Full text link
    In this article a simple and easy to install low magnetic field extension of the SQUID magnetometer Quantum Design MPMS-7 is described. This has been accomplished by complementing the MPMS-7 magnet control system with a laboratory current supply for the low magnetic field region (B \leq 200G). This hard- and software upgrade provides a significant gain in the magnetic field accuracy up to an order of magnitude compared with the standard instrument's setup and is improving the resolution to better than 0.01G below 40G. The field control has been integrated into the Quantum Design MultiVu software for a transparent and user-friendly operation of this extension. The improvements achieved are especially useful, when low magnetic field strengths (B < 1G) are required at high precision. The specific advantages of this application are illustrated by sophisticated magnetic characterisation of lowdimensional superconductors like Sc3CoC4 and SnSe2{Co({\eta}-C5H5)2}x.Comment: 16 pages, 7 figure

    Huntingtin regulates Ca2+ chemotaxis and K+-facilitated cAMP chemotaxis, in conjunction with the monovalent cation/H+ exchanger Nhe1, in a model developmental system: Insights into its possible role in Huntington׳s disease

    Get PDF
    AbstractHuntington׳s disease is a neurodegenerative disorder, attributable to an expanded trinucleotide repeat in the coding region of the human HTT gene, which encodes the protein huntingtin. These mutations lead to huntingtin fragment inclusions in the striatum of the brain. However, the exact function of normal huntingtin and the defect causing the disease remain obscure. Because there are indications that huntingtin plays a role in Ca2+ homeostasis, we studied the deletion mutant of the HTT ortholog in the model developmental system Dictyostelium discoideum, in which Ca2+ plays a role in receptor-regulated behavior related to the aggregation process that leads to multicellular morphogenesis. The D. discoideum htt−-mutant failed to undergo both K+-facilitated chemotaxis in spatial gradients of the major chemoattractant cAMP, and chemotaxis up a spatial gradient of Ca2+, but behaved normally in Ca2+-facilitated cAMP chemotaxis and Ca2+-dependent flow-directed motility. This was the same phenotypic profile of the null mutant of Nhel, a monovalent cation/H+exchanger. The htt−-mutant also failed to orient correctly during natural aggregation, as was the case for the Nhel mutant. Moreover, in a K+-based buffer the normal localization of actin was similarly defective in both htt− and nhe1− cells in a K+-based buffer, and the normal localization of Nhe1 was disrupted in the htt− mutant. These observations demonstrate that Htt and Nhel play roles in the same specific cation-facilitated behaviors and that Nhel localization is directly or indirectly regulated by Htt. Similar cation-dependent behaviors and a similar relationship between Htt and Nhe1 have not been reported for mammalian neurons and deserves investigation, especially as it may relate to Huntington׳s disease

    Image-guided liver surgery: intraoperative projection of computed tomography images utilizing tracked ultrasound

    Get PDF
    AbstractBackgroundUltrasound (US) is the most commonly used form of image guidance during liver surgery. However, the use of navigation systems that incorporate instrument tracking and three-dimensional visualization of preoperative tomography is increasing. This report describes an initial experience using an image-guidance system with navigated US.MethodsAn image-guidance system was used in a total of 50 open liver procedures to aid in localization and targeting of liver lesions. An optical tracking system was employed to localize surgical instruments. Customized hardware and calibration of the US transducer were required. The results of three procedures are highlighted in order to illustrate specific navigation techniques that proved useful in the broader patient cohort.ResultsOver a 7-month span, the navigation system assisted in completing 21 (42%) of the procedures, and tracked US alone provided additional information required to perform resection or ablation in six procedures (12%). Average registration time during the three illustrative procedures was <1min. Average set-up time was approximately 5min per procedure.ConclusionsThe Explorer™ Liver guidance system represents novel technology that continues to evolve. This initial experience indicates that image guidance is valuable in certain procedures, specifically in cases in which difficult anatomy or tumour location or echogenicity limit the usefulness of traditional guidance methods

    The support model for people with legally modified abilities according to United Nations

    Get PDF
    Este artículo se basa en una investigación social sobre el sistema de protección jurídica de las personas con algún tipo de discapacidad o en situación de dependencia que se encuentran sometidas a las figuras de tutela o curatela, en aplicación de lo previsto y establecido en el Código Civil Español, en sus artículos 199 y 200, así como en la Ley de Enjuiciamiento Civil. La investigación se plantea como un estudio comparado entre diferentes países de la Unión Europea para ver su adecuación a lo establecido en el artículo 12 de la Convención de Naciones Unidas sobre derechos de las Personas con Discapacidad (en adelante, CDPD) en los procedimientos de incapacitación. Los resultados se analizan sobre la base de modelos técnico-sociales de intervención, los análisis jurídicos y la experiencia adquirida por las Fundación Tutelares de Castilla y León. Se proponen y diseñan algunas alternativas y servicios que pueden mejorar la calidad de vida de las personas adultas incapacitadas judicialmente y el tipo de apoyos que se les puede prestar, de acuerdo a lo establecido en la Convención de Naciones Unidas.This article is based on social research into the system of legal protection for persons with disabilities or in a situation of dependence who are subject to the figures of guardianship or conservatorship pursuant to the provisions in the Spanish Civil Code, sections 199 and 200, as well as the Code of Civil Procedure. The research is presented as a comparative study between different countries of the European Union regarding the adaptation to the provisions of Article 12 of the UN Convention on Rights of Persons with Disabilities (hereinafter CRPD) Incapacitation procedures. The results are analyzed on the basis of technical-social intervention models, legal analysis and the experience of Guardianship Foundations of Castilla y León. Some alternatives and services are proposed and designed that can improve the quality of life of legally incapacitated persons and the type of support that can be provided to them in accordance with the provisions of the United Nations Convention

    Effects of warming and drought on potential N2O emissions and denitrifying bacteria abundance in grasslands with different land-use

    Get PDF
    Increased warming in spring and prolonged summer drought may alter soil microbial denitrification. We measured potential denitrification activity and denitrifier marker gene abundances (nirK, nirS, nosZ) in grasslands soils in three geographic regions characterized by site-specific land-use indices (LUI) after warming in spring, at an intermediate sampling and after summer drought. Potential denitrification was significantly increased by warming, but did not persist over the intermediate sampling. At the intermediate sampling, the relevance of grassland land-use intensity was reflected by increased potential N2O production at sites with higher LUI. Abundances of total bacteria did not respond to experimental warming or drought treatments, displaying resilience to minor and short-term effects of climate change. In contrast, nirS- and nirK-type denitrifiers were more influenced by drought in combination with LUI and pH, while the nosZ abundance responded to the summer drought manipulation. Land-use was a strong driver for potential denitrification as grasslands with higher LUI also had greater potentials for N2O emissions. We conclude that both warming and drought affected the denitrifying communities and the potential denitrification in grassland soils. However, these effects are overruled by regional and site-specific differences in soil chemical and physical properties which are also related to grassland land-use intensit

    High‐Resolution Capillary Printing of Eutectic Gallium Alloys for Printed Electronics

    Get PDF
    A versatile liquid metal (LM) printing process enabling the fabrication of various fully printed devices such as intra- and interconnect wires, resistors, diodes, transistors, and basic circuit elements such as inverters which are process compatible with other digital printing and thin film structuring methods for integration is presented. For this, a glass capillary-based direct-write method for printing LMs such as eutectic gallium alloys, exploring the potential for fully printed LM-enabled devices is demonstrated. Examples for successful device fabrication include resistors, p–n diodes, and field effect transistors. The device functionality and easiness of one integrated fabrication flow shows that the potential of LM printing is far exceeding the use of interconnecting conventional electronic devices in printed electronics

    Telescoped approach to aryl hydroxymethylation in the synthesis of a key pharmaceutical intermediate

    Get PDF
    An efficient synthetic approach leading to introduction of the hydroxymethyl group to an aryl moiety via combination of the Bouveault formylation and hydride reduction has been optimized using a rational, mechanistic-based approach. This approach enabled telescoping of the two steps into a single efficient process, readily amenable to scaleup
    corecore