From a Well-Defined Organozinc Precursor to Diverse Luminescent Coordination Polymers Based on Zn(II)-Quinolinate Building Units Interconnected by Mixed Ligand Systems.

Introduction of photoactive building blocks into mixed-ligand coordination polymers appears to be a promising way to produce new advanced luminescent materials. However, rational design and self-assembly of the multi-component supramolecular systems is challenging from both a conceptual and synthetic perspective. Here, we report exploratory studies that investigate the potential of [Zn(q)2]2[tBuZn(OH)]2 complex (q = deprotonated 8-hydroxyquinoline) as an organozinc precursor as well as a mixed-ligand synthetic strategy for the preparation of new luminescent coordination polymers (CPs). As a result we present three new 2D mixed-ligand Zn(II)-quinolinate coordination polymers which are based on various zinc quinolinate secondary building units interconnected by two different organic linker types, i.e., deprotonated 4,4'-oxybisbenzoic acid (H2obc) as a flexible dicarboxylate linker and/or selected bipyridines (bipy). Remarkably, using the title organozinc precursors in a combination with H2obc and 4,4'-bipyridine, a novel molecular zinc quinolinate building unit, [Zn4(q)6(bipy)2(obc)2], was obtained which self-assembled into a chain-type hydrogen-bonded network. The application of the organometallic precursor allowed for its direct reaction with the selected ligands at ambient temperature, avoiding the use of both solvothermal conditions and additional base reagents. In turn, the reaction involving Zn(NO3)2, as a classical inorganic precursor, in a combination with H2obc and bipy led to a novel 1D coordination polymer [Zn2(q)2(NO3)2(bipy)]. While the presence of H2obc was essential for the formation of this coordination polymer, this ditopic linker was not incorporated into the isolated product, which indicates its templating behavior. The reported compounds were characterized by single-crystal and powder X-ray diffraction, elemental analysis as well as UV-Vis and photoluminescence spectroscopy

Vegetable Fillers and Rapeseed Oil-Based Polyol as Natural Raw Materials for the Production of Rigid Polyurethane Foams

The reported study concerns the introduction of renewable raw materials into the formulation of rigid polyurethane foams in the quest for the sustainable development of polymer composites. In this study, rigid polyurethane foam composites were prepared using 75 wt.% of rapeseed oil-based polyol and 15 parts per hundred parts of polyol (php) of natural fillers such as chokeberry pomace, raspberry seeds, as well as hazelnut and walnut shells. The influence of the used raw materials on the foaming process, structure, and properties of foams was investigated using a FOAMAT analyzer and a wide selection of characterization techniques. The introduction of renewable raw materials limited reactivity of the system, which reduced maximum temperature of the foaming process. Moreover, foams prepared using renewable raw materials were characterized by a more regular cell structure, a higher share of closed cells, lower apparent density, lower compressive strength and glass transition temperature, low friability (<2%), low water absorption (<1%), high dimensional stability (<±0.5%) and increased thermal stability. The proper selection and preparation of the renewable raw materials and the rational development of the polyurethane recipe composition allow for the preparation of environmentally-friendly foam products with beneficial application properties considering the demands of the circular economy in the synthesis of rigid foams

Polyurethane Composite Foams Synthesized Using Bio-Polyols and Cellulose Filler

Rigid polyurethane foams were obtained using two types of renewable raw materials: bio-polyols and a cellulose filler (ARBOCEL® P 4000 X, JRS Rettenmaier, Rosenberg, Germany). A polyurethane system containing 40 wt.% of rapeseed oil-based polyols was modified with the cellulose filler in amounts of 1, 2, and 3 php (per hundred polyols). The cellulose was incorporated into the polyol premix as filler dispersion in a petrochemical polyol made using calenders. The cellulose filler was examined in terms of the degree of crystallinity using the powder X-ray diffraction PXRD -and the presence of bonds by means of the fourier transform infrared spectroscopy FT-IR. It was found that the addition of the cellulose filler increased the number of cells in the foams in both cross-sections—parallel and perpendicular to the direction of the foam growth—while reducing the sizes of those cells. Additionally, the foams had closed cell contents of more than 90% and initial thermal conductivity coefficients of 24.8 mW/m∙K. The insulation materials were dimensionally stable, especially at temperatures close to 0 °C, which qualifies them for use as insulation at low temperatures

Moisture Resistance, Thermal Stability and Fire Behavior of Unsaturated Polyester Resin Modified with L-histidinium Dihydrogen Phosphate-Phosphoric Acid

In this paper, the fire behavior of unsaturated polyester resin (UP) modified with L-histidinium dihydrogen phosphate-phosphoric acid (LHP), being a novel intumescent fire retardant (IFR), was investigated. Thermal and thermomechanical properties of the UP with different amounts of LHP (from 10 to 30 wt. %) were determined by thermogravimetric analysis (TG) as well as dynamic mechanical thermal analysis (DMTA). Reaction to small flames was studied by horizontal burning (HB) test, while fire behavior and smoke emission were investigated with the cone calorimeter (CC) and smoke density chamber. Further, the analysis of volatile products was conducted (TGA/FT-IR). It was observed that the addition of LHP resulted in the formation of carbonaceous char inhibiting the thermal decomposition, burning rate and smoke emission. The most promising results were obtained for the UP containing 30 wt. % of LHP, for which the highest reduction in maximum values of heat release rate (200 kW/m2) and total smoke release (3535 m2/m2) compared to unmodified polymer (792 kW/m2 and 6895 m2/m2) were recorded. However, some important disadvantage with respect to water resistance was observed

Influence of the Coulomb field on charged particle emission in Ar + Ni reaction at 77 MeV/u

Ar+Ni collisions at 77 MeV/u were studied in the experiment E286 performed at GANIL. An important advantage of this experiment was an application of the neutron detector DEMON for registration of both neutral and charged particles. This feature allows to compare characteristics of neutrons and protons detected by the same detector and gives a possibility to determine the influence of the Coulomb field on the proton emission. Estimation of a charge of the emitting source was performed by comparing energy spectra of neutrons and protons detected under identical experimental conditions. The experimental results were compared with the prediction of the SIMON model [D. Durand, Nucl. Phys. A541, 266 (1992)] and Landau-Vlasov model [Z. Basrak, Ph. Eudes, P. Abgrall, F. Haddad. F. Sébille, Nucl, Phys. A624, 472 (1997)].SCOPUS: cp.pinfo:eu-repo/semantics/publishe

Nuclear interferometry for two-nucleon systems (experiment E286 at GANIL)

The main points of a new experiment being prepared currently at GANIL are reported. Simultaneous measurement of two-nucleon (nn, pp, np) correlations at small relative velocities will be performed. Special attention is paid to (nn) correlations as free of Coulomb effects. The physical goal of experiment is to find the space-time properties of nucleon emission dynamics in heavy-ion collisions and to clarify some related questions: sequence of particle emission, three-body Coulomb effects, deuteron production mechanism etc.SCOPUS: ar.jinfo:eu-repo/semantics/publishe