Re National Harbours Board and Public Service Alliance of Canada

Employee Grievance alleging unjust discharge. AWARD: Employee grievance alleging breach of a collective agree­ment between the parties dated August 15, 1973, in that the grievor was discharged without just cause because the medical reasons for his discharge are not supported by the evidence. At the hearing it was also argued on behalf of the grievor, that his grievance should be allowed because he did not receive fair notice of the grounds upon which his employ­ment was terminated. The grievor requests that he be rein­stated in his position as constable with the National Harbour Police, with full pay and benefits retroactive to the date of his release. He further requests that all reference to this action be purged from the National Harbours Board\u27s and Government\u27s files

Gamma Ray and Neutron Spectrometer for the Lunar Resource Mapper

One of the early Space Exploration Initiatives will be a lunar orbiter to map the elemental composition of the Moon. This mission will support further lunar exploration and habitation and will provide a valuable dataset for understanding lunar geological processes. The proposed payload will consist of the gamma ray and neutron spectrometers which are discussed, an x ray fluorescence imager, and possibly one or two other instruments

Impact of rest-redistribution on fatigue during maximal eccentric knee extensions

Redistributing long inter-set rest intervals into shorter but more frequent rest intervals generally maintains concentric performance, possibly due to improved energy store maintenance. However, eccentric actions require less energy than concentric actions, meaning that shorter but more frequent sets may not affect eccentric actions to the same degree as concentric actions. Considering the increased popularity of eccentric exercise, the current study evaluated the effects of redistributing long inter-set rest periods into shorter but more frequent rest periods during eccentric only knee extensions. Eleven resistance-trained men performed 40 isokinetic unilateral knee extensions at 60°·s-1 with 285 s of total rest using traditional sets (TS; 4 sets of 10 with 95 s inter-set rest) and rest-redistribution (RR; 20 sets of 2 with 15 s inter-set rest). Before and during exercise, muscle oxygenation was measured via near-infrared spectroscopy, and rating of perceived exertion (RPE) was recorded after every 10th repetition. There were no differences between protocols for peak torque (RR, 241.58±47.20 N; TS, 231.64±48.87 N; p=0.396) or total work (RR, 215.26±41.47 J; TS, 209.71±36.02 J; p=0.601), but moderate to large effect sizes existed in later repetitions (6,8,10) with greater peak torque during RR (d=0.66-1.19). For the entire session, RR had moderate effects on RPE (RR, 5.73±1.42; TS, 6.09±1.30; p=0.307; d=0.53) and large effects on oxygen saturation (RR, 5857.4±310.0; TS, 6495.8±273.8; p=0.002, d=2.13). Therefore, RR may maintain peak torque or total work during eccentric exercise, improve oxygen utilization at the muscle, and reduce the perceived effort

Effect of Strength on Velocity and Power During Back Squat Exercise in Resistance-Trained Men and Women

The purpose was to examine load-velocity and load-power relationships of back squat in resistance-trained men (n = 20, 21.3 ± 1.4 years, 183.0 ± 8.0 cm, 82.6 ± 8.0 kg, 11.5 ± 5.0% total body fat) and women (n = 18; 20.0 ± 1.0 years; 166.5 ± 6.9 cm; 63.9 ± 7.9 kg, 20.3 ± 5.0% body fat). Body composition testing was performed followed by determination of back squat 1 repetition maximum (1RM). After at least 72 hours of recovery, subjects returned to the laboratory and completed 2 repetitions at each of 7 separate loads (30, 40, 50, 60, 70, 80, and 90% 1RM) in a random order. During each repetition, peak and average velocity and power were quantified using a commercially available linear position transducer. Men produced higher absolute peak and average power and velocity at all loads. When power output was normalized for body mass, significant differences remained. However, when normalizing for strength, no significant differences were observed between sexes. Furthermore, when subjects were subdivided into strong and weak groups, those above the median 1RM produced higher peak power, but only at loads greater than 60% 1RM. It was concluded that differences between men and women may be a result of strength rather than biological sex. Furthermore, training for maximal strength may be an appropriate method to augment maximal power output in those athletes who exhibit low levels of strength

Changes in Maximal Strength and Home Run Performance in Ncaa Division I Baseball Players Across 3 Competitive Seasons: A Descriptive Study

The purpose of this longitudinal, descriptive study was to observe changes in maximal strength measured via isometric clean grip mid-thigh pull and home runs (total and home runs per game) across three years of training and three competitive seasons for four National Collegiate Athletic Association (NCAA) Division 1 baseball players. A one-way repeated measures analysis of variance (ANOVA) was performed, revealing significant univariate effects of time for peak force (PF) (p = 0.003) and peak force allometrically scaled (PFa) (p = 0.002). Increases in PF were noted from season 1 to season 2 (p = 0.031) and season 3 (p = 0.004), but season 2 was not significantly different than season 3 (p = 0.232). Additionally, increases in PFa were noted from season 1 to season 2 (p = 0.010) and season 3 (p \u3c 0.001), but season 2 was not significantly different than season 3 (p = 0.052). Home runs per game rose from the 2009 (0.32) to 2010 season (1.35) and dropped during the 2011 season (1.07). A unique aspect of the study involves 2010 being the season in which ball-bat coefficient of restitution (BBCOR) bats were introduced to the NCAA competition

Simplifying External Load Data in NCAA Division-I Men\u27s Basketball Competitions: A Principal Component Analysis

The primary purpose was to simplify external load data obtained during Division-I (DI) basketball competitions via principal component analysis (PCA). A secondary purpose was to determine if the PCA results were sensitive to load demands of different positional groups (POS). Data comprised 229 observations obtained from 10 men\u27s basketball athletes participating in NCAA DI competitions. Each athlete donned an inertial measurement unit that was affixed to the same location on their shorts prior to competition. The PCA revealed two factors that possessed eigenvalues \u3e1.0 and explained 81.42% of the total variance. The first factor comprised total decelerations (totDEC, 0.94), average speed (avgSPD, 0.90), total accelerations (totACC, 0.85), total mechanical load (totMECH, 0.84), and total jump load (totJUMP, 0.78). Maximum speed (maxSPD, 0.94) was the lone contributor to the second factor. Based on the PCA, external load variables were included in a multinomial logistic regression that predicted POS (Overall model, p \u3c 0.0001; AUCcenters = 0.93, AUCguards = 0.88, AUCforwards = 0.80), but only maxSPD, totDEC, totJUMP, and totMECH were significant contributors to the model\u27s success (p \u3c 0.0001 for each). Even with the high significance, the model still had some issues differentiating between guards and forwards, as in-game demands often overlap between the two positions. Nevertheless, the PCA was effective at simplifying a large external load dataset collected on NCAA DI men\u27s basketball athletes. These data revealed that maxSPD, totDEC, totJUMP, and totMECH were the most sensitive to positional differences during competitions. To best characterize competition demands, such variables may be used to individualize training and recovery regimens most effectively

Susceptibility of hamsters to clostridium difficile isolates of differing toxinotype

Clostridium difficile is the most commonly associated cause of antibiotic associated disease (AAD), which caused ~21,000 cases of AAD in 2011 in the U.K. alone. The golden Syrian hamster model of CDI is an acute model displaying many of the clinical features of C. difficile disease. Using this model we characterised three clinical strains of C. difficile, all differing in toxinotype; CD1342 (PaLoc negative), M68 (toxinotype VIII) and BI-7 (toxinotype III). The naturally occurring non-toxic strain colonised all hamsters within 1-day post challenge (d.p.c.) with high-levels of spores being shed in the faeces of animals that appeared well throughout the entire experiment. However, some changes including increased neutrophil influx and unclotted red blood cells were observed at early time points despite the fact that the known C. difficile toxins (TcdA, TcdB and CDT) are absent from the genome. In contrast, hamsters challenged with strain M68 resulted in a 45% mortality rate, with those that survived challenge remaining highly colonised. It is currently unclear why some hamsters survive infection, as bacterial and toxin levels and histology scores were similar to those culled at a similar time-point. Hamsters challenged with strain BI-7 resulted in a rapid fatal infection in 100% of the hamsters approximately 26 hr post challenge. Severe caecal pathology, including transmural neutrophil infiltrates and extensive submucosal damage correlated with high levels of toxin measured in gut filtrates ex vivo. These data describes the infection kinetics and disease outcomes of 3 clinical C. difficile isolates differing in toxin carriage and provides additional insights to the role of each toxin in disease progression

Renewable Energy

This chapter presents an in-depth examination of major renewable energy technologies, including their installed capacity and energy supply in 2009 , the current state of market and technology development, their economic and financial feasibility in 2009 and in the near future, as well as major issues they may face relative to their sustainability or implementation. Renewable energy sources have been important for humankind since the beginning of civilization. For centuries, biomass has been used for heating, cooking, steam generation, and power production; solar energy has been used for heating and drying; geothermal energy has been used for hot water supplies; hydropower, for movement; and wind energy, for pumping and irrigation. For many decades renewable energy sources have also been used to produce electricity or other modern energy carriers

EC04-183 Chickpea Production in the High Plains

Chickpea (Cicer arietinum L.) is an annual grainlegume or “pulse crop” that is used extensively for human consumption. The seed of this plant, when dried, is commonly used in soup. Its primary use in the United States is for salad bars, while in the Middle East and India it is more frequently cooked and blended with rice dishes. Major chickpea producers include India, Pakistan, Mexico, Turkey, Canada, and Australia. Chickpea makes up more than 20 percent of world pulse production, behind dry bean and pea. Currently, the United States imports more than 80 percent of its domestic chickpea needs. Since the 1980s, chickpea production has increased rapidly in the northwestern United States. Meanwhile, due to agronomic, processing, and marketing constraints, production in the High Plains has been sporadic and often short-lived. During the past few years, the development of new varieties and the potential for chickpea production under dryland and limited irrigation conditions has generated renewed interest among High Plains producers. With this in mind, the purpose of this publication is to provide information to enhance the potential for successful chickpea production