The Efficiencies Defence in Merger Analysis in Canada and the US

Whatever the statutory differences or language differences in Guidelines between Canada and the US the application of competition rules and procedures is remarkably similar in the two countries. Recent adjustments to the role of efficiencies in merger analysis in the two countries reveal a potential departure from this claim. The Canadian Competition Bureau (the agency responsible for the implementation of competition policy in Canada) has moved from a clear and focused position on the role of efficiencies in merger analysis to one that is much less certain and focused. For its part the US agencies (Department of Justice and the Federal Trade Commission) have moved from a more ambiguous or undefined position on the role of efficiencies in merger analysis to one that is more certain and focused

The Efficiencies Defence in Merger Analysis in Canada and the US

Whatever the statutory differences or language differences in Guidelines between Canada and the US the application of competition rules and procedures is remarkably similar in the two countries. Recent adjustments to the role of efficiencies in merger analysis in the two countries reveal a potential departure from this claim. The Canadian Competition Bureau (the agency responsible for the implementation of competition policy in Canada) has moved from a clear and focused position on the role of efficiencies in merger analysis to one that is much less certain and focused. For its part the US agencies (Department of Justice and the Federal Trade Commission) have moved from a more ambiguous or undefined position on the role of efficiencies in merger analysis to one that is more certain and focused

The Efficiencies Defence in Merger Analysis in Canada and the US

Whatever the statutory differences or language differences in Guidelines between Canada and the US the application of competition rules and procedures is remarkably similar in the two countries. Recent adjustments to the role of efficiencies in merger analysis in the two countries reveal a potential departure from this claim. The Canadian Competition Bureau (the agency responsible for the implementation of competition policy in Canada) has moved from a clear and focused position on the role of efficiencies in merger analysis to one that is much less certain and focused. For its part the US agencies (Department of Justice and the Federal Trade Commission) have moved from a more ambiguous or undefined position on the role of efficiencies in merger analysis to one that is more certain and focused

Broadening the Bandwidth of Piezoelectric Energy Harvesters Using Liquid Filled Mass

AbstractA narrow bandwidth is one of the most challenging issues that vibrational energy harvesters have to overcome. This paper demonstrates a novel method of broadening the bandwidth without significantly reducing the peak output voltage. The method uses a liquid filled mass to create a sliding mass effect in order to broaden the bandwidth. The fluid mass increased the full-width-half-maximum (FWHM) value from 1.6Hz to 4.45Hz with no significant decrease in peak-to-peak voltage when compared to an empty mass. The fluid filled mass has a non-linear mass distribution during low frequency, high acceleration applications

Effect of solder volume on joint shape with variable chip-to-board contact pad ratio

The objective of this paper is to investigate the effect of the pad size ratio between the chip and board end of a solder joint on the shape of that solder joint in combination with the solder volume available. The shape of the solder joint is correlated to its reliability and thus of importance. For low density chip bond pad applications Flip Chip (FC) manufacturing costs can be kept down by using larger size board pads suitable for solder application. By using “Surface Evolver” software package the solder joint shapes associated with different size/shape solder preforms and chip/board pad ratios are predicted. In this case a so called Flip-Chip Over Hole (FCOH) assembly format has been used. Assembly trials involved the deposition of lead-free 99.3Sn0.7Cu solder on the board side, followed by reflow, an underfill process and back die encapsulation. During the assembly work pad off-sets occurred that have been taken into account for the Surface Evolver solder joint shape prediction and accurately matched the real assembly. Overall, good correlation was found between the simulated solder joint shape and the actual fabricated solder joint shapes. Solder preforms were found to exhibit better control over the solder volume. Reflow simulation of commercially available solder preform volumes suggests that for a fixed stand-off height and chip-board pad ratio, the solder volume value and the surface tension determines the shape of the joint

System packaging & integration for a swallowable capsule using a direct access sensor

Technological developments in biomedical microsystems are opening up new opportunities to improve healthcare procedures. Swallowable diagnostic capsules are an example of this. In this paper, a diagnostic capsule technology is described based on direct-access sensing of the Gastro Intestinal (GI) fluids throughout the GI tract. The objective of this paper is two-fold: i) develop a packaging method for a direct access sensor, ii) develop an encapsulation method to protect the system electronics. The integrity of the interconnection after sensor packaging and encapsulation is correlated to its reliability and thus of importance. The zero level packaging of the sensor was achieved by using a so called Flip Chip Over Hole (FCOH) method. This allowed the fluidic sensing media to interface with the sensor, while the rest of the chip including the electrical connections can be insulated effectively. Initial tests using Anisotropic Conductive Adhesive (ACA) interconnect for the FCOH demonstrated good electrical connections and functionality of the sensor chip. Also a preliminary encapsulation trial of the flip chipped sensor on a flexible test substrate has been carried out and showed that silicone encapsulation of the system is a viable option

DC/DC converter 3D assembly for autonomous sensor nodes

This paper reports on the design and the manufacturing of an integrated DCDC converter, which respects the specificity of sensor node network: compactness, high efficiency in acquisition and transmission modes, and compatibility with miniature Lithium batteries. A novel integrated circuit (ASIC) has been designed and manufactured to provide regulated Voltage to the sensor node from miniaturized, thin film Lithium batteries. Then, a 3D integration technique has been used to integrate this ASIC in a 3 layers stack with high efficiency passives components, mixing the wafer level technologies from two different research institutions. Electrical results have demonstrated the feasibility of this integrated system and experiments have shown significant improvements in the case of oscillations in regulated voltage. However, stability of this output voltage toward the input voltage has still to be improved

Stellar mass loss and the Intra-Cluster Medium in Galactic globular clusters: a deep radio survey for HI and OH

We present the results of a survey, the deepest to date, for HI emission at 21 cm and OH emission at 18 cm (lines at 1612, 1665, 1667 and 1720 MHz) in the direction towards the Galactic globular clusters M 15, M 2, NGC 6934, NGC 7006 and Pal 13. The aim is to measure the amount of hydrogen in the intra-cluster medium (ICM), and to find OH masers in the circumstellar envelopes of globular cluster red giants. We present a tentative detection of 0.3 Msun of neutral hydrogen in M 15 and possible detections of neutral hydrogen in M 2 and Pal 13. We derive upper limits to the neutral hydrogen content of NGC 6934 and NGC 7006. No OH emission is detected. We also present deep HI data of the northern tip of the Magellanic Stream behind Pal 13.Comment: Accepted for publication in MNRAS. 7 page