The influence of skull shape modularity on internal skull structures: a 3D-Pilot study using bears

In order to capture the phenotypic variation of the internal skull structures, such as the sinuses or the brain, it is necessary to perform CT scans in a large number of specimens, which is difficult and expensive. Therefore, while the external morphology of the mammalian cranium has been the subject of many morphometric studies, the internal structures of the cranium have been comparatively less studied. Here, we explore how the variation of external shape reflects the morphology of internal structures. We use the family Ursidae (Carnivora, Mammalia) as a case study because bears have a wide variability of cranial morphologies in part associated with different trophic ecologies. To do this, we digitized a set of landmarks in 3D with a Microscribe G2X from the external surface of the cranium in a wide sample of bears. Additionally, the crania of seven bear species were CT-scanned and prepared digitally to visualize the 3D models of the external cranium morphology and of internal structures. Subsequently, we divided the landmarks into two modules, splanchnocranium and neurocranium, and we perform a two-block partial least squares analysis (2B PLS) to explore the intraspecific (static) morphological changes associated with the covariation between them. These morphological changes were visualized using the morphing technique with the 3D models, looking at both the external shape and the internal structures. In addition, we inferred the volume of the sinuses and of the brain in each hypothetical model. Our results show that the first two PLS axes are associated externally with changes in the basicranial angle, face length and cranium height and width. Concerning the internal structures, there are parallel changes in dorso-ventral and medio-lateral expansion of sinuses and brain, accompanied by their corresponding changes in volume. In contrast, the third PLS axis is related to opposite changes in the volume of sinuses and brain. These preliminary results suggest that the opposite relationship between sinuses and brain volumes in the bear cranium is not as evident as expected, at least at intraspecific level.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Development of Magnetostrictive Transducer Prototype for Blockage Detection on Molten Salt Pipes

In solar thermal power plants molten salt is often used to store and transport the energy that is collected during the day. The external pipe temperature is measured to activate an electric heating system if the temperature approaches the melting point. However, salt solidification cannot be completely excluded from the plant management. Once occurred, the location of a salt blockage is very complex due to the high temperature of the pipe. Therefore, when this problem arises, power plants have to stop production with the consequences in time and cost that this entails. Electro-magnetic acoustic transducers can be used as non-destructive testing systems for this application. A method for salt blockage detection is proposed that is applicable in straight sections of pipes by employing torsional guided waves that are generated with magnetostrictive transducers. The present paper deals with the transducer conception and the design of the power supply to activate it. Two alternatives are proposed and compared to determine the improvement in the amplitude/noise ratio. Finally, the experimental results show the performance of the equipment in a small prototype, thus validating the technique presented

Modeling a multilevel converter for radiography and fluoroscopy

EPE'16 ECCE Europe, 18th European Conference on Power Electronics and Applications, 5-9 september 2016, Karsruhe, GermanyIn this paper a mathematical model for a resonant multilevel converter is presented. The topology has been conceived to be used in X-ray power supplies. The power stage has been designed to minimize the resonant current throughout the input voltage range: 400V to 750V. The inverter stage is based on the series-parallel resonant topology, LCC, to include the parasitic elements of the step-up transformer. However, the introduction of an additional magnetic coupling provides a way to modify the reactive elements depending on the output powe

Toxicological assessment of nanocrystalline metal alloys with potential applications in the aeronautical field

The development of new candidate alloys with outstanding characteristics for their use in the aeronautical field is one of the main priorities for the sector. In this context, nanocrystaline (nc) alloys are considered relevant materials due to their special features, such as their exceptional physical and mechanical properties. However, another important point that needs to be considered with newly developed alloys is the potential toxicological impact that these materials may have in humans and other living organisms. The aim of this work was to perform a preliminary toxicological evaluation of three nc metal alloys (WCu, WAl and TiAl) in powder form produced by mechanical alloying, applying different in vitro assays, including a mix of W-Cu powders with standard grain size in the experiments to stablish comparisons. The effects of the direct exposure to powder suspensions and/or to their derived leachates were analysed in three model organisms representative of human and environmental exposures (the adenocarcinomic human alveolar basal epithelial cell line A549, the yeast Saccharomyces cerevisiae and the Gram negative bacterium Vibrio fischeri). Altogether, the results obtained provide new insights about the potential harmful effects of the selected nc alloys, showing that, from a toxicological perspective, nc TiAl is the safest candidate in the model organisms and conditions tested.EU Horizon 2020 projects ICARUS (H2020-FETOPEN-2014-2015-RIA, grant agreement N° 713514) and ICARUS-INAS (FETOPEN-03-2018-2019-2020, Grant agreement N° 946174)

Pine has two glutamine synthetase paralogs, GS1b.1 and GS1b.2, exhibiting distinct biochemical properties

The enzyme glutamine synthetase (EC 6.3.1.2) is mainly responsible for the incorporation of inorganic nitrogen into organic molecules in plants. In the present work, a pine (Pinus pinaster) GS1 (PpGS1b.2) gene was identified, showing a high sequence identity with the GS1b.1 gene previously characterized in conifers. Phylogenetic analysis revealed that the presence of PpGS1b.2 is restricted to the genera Pinus and Picea and is not found in other conifers. Gene expression data suggest a putative role of PpGS1b.2 in plant development, similar to other GS1b genes from angiosperms, suggesting evolutionary convergence. The characterization of GS1b.1 and GS1b.2 at the structural, physicochemical, and kinetic levels has shown differences even though they have high sequence homology. GS1b.2 had a lower optimum pH (6 vs. 6.5) and was less thermally stable than GS1b.1. GS1b.2 exhibited positive cooperativity for glutamate and substrate inhibition for ammonium. However, GS1b.1 exhibited substrate inhibition behavior for glutamate and ATP. Alterations in the kinetic characteristics produced by site-directed mutagenesis carried out in this work strongly suggest an implication of amino acids at positions 264 and 267 in the active center of pine GS1b.1 and GS1b.2 being involved in affinity toward ammonium. Therefore, the amino acid differences between GS1b.1 and GS1b.2 would support the functioning of both enzymes to meet distinct plant needsFunding for open access charge: Universidad de Malaga/CBUA

Dynamic modeling of the solar field in parabolic trough solar power plants

Parabolic trough solar power plants use a thermal fluid to transfer thermal energy from solar radiation to a water-steam Rankine cycle in order to drive a turbine that, coupled to an electrical generator, produces electricity. These plants have a heat transfer fluid (HTF) system with the necessary elements to transform solar radiation into heat and to transfer that thermal energy to the water-steam exchangers. In order to get the best possible performance in the Rankine cycle and, hence, in the thermal plant, it is necessary that the thermal fluid reach its maximum temperature when leaving the solar field (SF). Also, it is mandatory that the thermal fluid does not exceed the maximum operating temperature of the HTF, above which it degrades. It must be noted that the optimal temperature of the thermal fluid is difficult to obtain, since solar radiation can change abruptly from one moment to another. The aim of this document is to provide a model of an HTF system that can be used to optimize the control of the temperature of the fluid without interfering with the normal operation of the plant. The results obtained with this model will be contrasted with those obtained in a real plant

LCC Resonant Multilevel Converter for X-ray Applications

Medical X-ray appliances use high-voltage power supplies that must be able to work with very different energy requirements. Two techniques can be distinguished in X-ray medical imaging: fluoroscopy and radioscopy. The former involves low power radiation with a long exposure time, while radioscopy requires large power during short radiographic exposure times. Since the converter has to be designed by taking into account the maximum power specification, it will exhibit a poor efficiency when operating at low power levels. Such a problem can be solved by using a new multilevel LCC topology. This topology is based on a classical series-parallel resonant topology, but includes an additional low-voltage auxiliary transformer whose function depends on the X-ray technique considered. When radioscopy operation is selected, the transformer will allow the power to be shared between two full-bridges. If fluoroscopy mode is activated, the auxiliary full bridge is disconnected and the magnetizing inductance of the auxiliary transformer is used to increase the resonant inductor in order to reduce the resonant currents, thus improving the efficiency of the converte