697 research outputs found
Direct numerical simulation of the autoignition of a hydrogen plume in a turbulent coflow of hot air
The autoignition of an axisymmetric nitrogen-diluted hydrogen plume in a turbulent coflowing stream of high-temperature air was investigated in a laboratory-scale set-up using three-dimensional numerical simulations with detailed chemistry and transport. The plume was formed by releasing the fuel from an injector with bulk velocity equal to that of the surrounding air coflow. In the ‘random spots' regime, autoignition appeared randomly in space and time in the form of scattered localized spots from which post-ignition flamelets propagated outwards in the presence of strong advection. Autoignition spots were found to occur at a favourable mixture fraction close to the most reactive mixture fraction calculated a priori from considerations of homogeneous mixtures based on inert mixing of the fuel and oxidizer streams. The value of the favourable mixture fraction evolved in the domain subject to the effect of the scalar dissipation rate. The hydroperoxyl radical appeared as a precursor to the build-up of the radical pool and the ensuing thermal runaway at the autoignition spots. Subsequently, flamelets propagated in all directions with complex dynamics, without anchoring or forming a continuous flame sheet. These observations, as well as the frequency of and scatter in appearance of the spots, are in good agreement with experiments in a similar set-up. In agreement with experimental observations, an increase in turbulence intensity resulted in a downstream shift of autoignition. An attempt is made to understand the key processes that control the mean axial and radial locations of the spots, and are responsible for the observed scatter. The advection of the most reactive mixture through the domain, and hence the history of evolution of the developing radical pools were considered to this effec
Recommended from our members
Multimode Interference 3 dB Splitters in Hollow Core Metallic Waveguides for Low-Loss THz Wave Transmission
A multimode interference half-power splitter on hollow core polysterene-coated metallic waveguide is demonstrated in this study. The modal properties, propagation length, optical field evolution, and dispersion of the aforementioned device have been investigated using the full vectorial finite-element-based modal analysis and beam propagation method, as well as the finite-difference time-domain approach
Recommended from our members
Low-loss multimode interference couplers for terahertz waves
The terahertz (THz) frequency region of the electromagnetic spectrum is located between the traditional microwave spectrum and the optical frequencies, and offers a significant scientific and technological potential in many fields, such as in sensing, in imaging and in spectroscopy. Waveguiding in this intermediate spectral region is a major challenge. Amongst the various THz waveguides suggested, metal-clad plasmonic waveguides and specifically hollow core structures, coated with insulating material are the most promising low-loss waveguides used in both active and passive devices. Optical power splitters are important components in the design of optoelectronic systems and optical communication networks such as Mach-Zehnder Interferometric switches, polarization splitter and polarization scramblers. Several designs for the implementation of the 3dB power splitters have been proposed in the past, such as the directional coupler-based approach, the Y-junction-based devices and the MMI-based approach. In the present paper a novel MMI-based 3dB THz wave splitter is implemented using Gold/polystyrene (PS) coated hollow glass rectangular waveguides. The H-field FEM based full-vector formulation is used here to calculate the complex propagation characteristics of the waveguide structure and the finite element beam propagation method (FE-BPM) and finite difference time domain (FDTD) approach to demonstrate the performance of the proposed 3dB splitter
Recommended from our members
Emergence of THz technologies and design and optimisation low-loss waveguides and devices
THz is an emerging technology with many important applications in imaging and sensing, but due to lack of suitable low-loss waveguides future progress can be limited. A rigorous full-vectorial modal solution approach based on the computationally efficient finite element method is used to find the propagation properties of THz waveguides. Design approaches are presented to reduce the modal loss of such waveguides. Designs of several THz devices, including quantum cascade lasers, power splitters and narrow-band filters are also presented
A holistic resilience framework development for rural power systems in emerging economies
Infrastructure and services within urban areas of developed countries have established reliable definitions of resilience and its dependence on various factors as an important pathway for achieving sustainability in these energy systems. However, the assessment, design, building and maintenance of power systems situated in rural areas in emerging economies present further difficulties because there is no a clear framework for such circumstances. Aiming to address this issue, this paper combines different visions of energy-related resilience both in general and under rural conditions in order to provide a robust practical framework for local and international stakeholders to derive the right actions in the rural context of emerging economies. An in-depth review is implemented to recompile information of resilience in general, in energy systems and in rural areas in particular, and a number of existing frameworks is also consulted. In order to acknowledge the particular circumstances and identify the important factors influencing the resilience of rural electrification in emerging economies, a holistic rural power system resilience framework is developed and presented. This consists of twenty-one indicators for technical resilience, eight indicators for social resilience, and thirteen indicators for economic resilience. This framework can be used by system owners and operators, policy makers, NGOs and communities to ensure the longevity of power systems. This work also paves the way for the creation of appropriate and effective resilience standards specifically targeted for application in these regions - aiming to achieve the delivery of global and local sustainability goals
On the performance of concentrating fluid-based spectral-splitting hybrid PV-thermal (PV-T) solar collectors
Concentrating fluid-based spectral-splitting hybrid PV-thermal (SSPVT) collectors are capable of high electrical and thermal efficiencies, as well as high-temperature thermal outputs. However, the optimal optical filter and the maximum potential of such collectors remain unclear. In this study, we develop a comprehensive two-dimensional model of a fluid-based SSPVT collector. The temperature distributions reveal that these designs are effective in thermally decoupling the PV module from the high-temperature filter flow-channel, improving the electrical performance of the module. For a Si solar cell-based SSPVT collector with optical filter #Si400-1100, the filter channel is able to produce high-temperature thermal energy (400 °C) with an efficiency of 19.5%, low-temperature thermal energy (70 °C) with an efficiency of 49.5%, and electricity with an efficiency 17.5%. Of note is that the relative fraction of high-temperature thermal energy, low-temperature thermal energy and electricity generated by such a SSPVT collector can be adjusted by shifting the upper- and lower-bound cut-off wavelengths of the optical filter, which are found to strongly affect the spectral and energy distributions through the collector. The optimal upper-bound cut-off always equals the bandgap wavelength of the solar cell material (e.g., 1100 nm for Si, and 850 nm for CdTe), while the optimal lower-bound cut-off follows more complex selection criteria. The SSPVT collector with the optimal filter has a significantly higher total effective efficiency than an equivalent conventional solar-thermal collector when the relative value of the high-temperature heat to that of electricity is lower than 0.5. Detailed guidance for selecting optimal filters and their role in controlling SSPVT collector performance under different conditions is provided
Recommended from our members
Experimental Investigation of the Operating Point of a 1-kW ORC System
The organic Rankine cycle (ORC) is a promising technology for the conversion of waste heat from industrial processes as well as heat from renewable sources. Many efforts have been channeled towards maximizing the thermodynamic potential of ORC systems through the selection of working fluids and the optimal choice of operating parameters with the aim of improving overall system designs, and the selection and further development of key components. Nevertheless, experimental work has typically lagged behind modelling efforts. In this paper, we present results from tests on a small-scale (1 kWel) ORC engine consisting of a rotary-vane pump, a brazed-plate evaporator and a brazed-plate condenser, a scroll expander with a built-in volume ratio of 3.5, and using R245fa as the working fluid. An electric oil-heater acted as the heat source, providing hot oil at temperatures in the range 120-140°C. The frequency of the expander was not imposed by an inverter or the electricity grid but depended directly on the attached generator load; both the electrical load on the generator and the pump rotational speed were varied in order to investigate the performance of the system. Based on the generated data, this paper explores the relationship between the operating conditions of the ORC engine and changes in the heat-source temperature, pump and expander speeds leading to working fluid flow rates between 0.0088 kg/s and 0.0337 kg/s, from which performance maps are derived. The experimental data is, in turn, used to assess the performance of both the individual components and of the system, with the help of an exergy analysis. In particular, the exergy analysis indicates that the expander accounts for the second highest loss in the system. Analysis of the results suggests that increased heat-source temperatures, working-fluid flow rates, higher pressure ratios and larger generator loads improve the overall cycle efficiency. Specifically, a 46% increase in pressure ratio from 2.4 to 4.4 allowed a 3-fold electrical power output increase from 180 W to 550 W, and an increase in the thermal efficiency of the ORC engine from 1 to 4%. Beyond reporting on important lessons learned in improving the performance of the system under consideration, comparisons will be shown for making proper choices with respect to the interplay between heat-source temperature, generator load, and pump speed in an ORC system
Techno-economic analysis of a combined heat and power system integrating hybrid photovoltaic-thermal collectors, a Stirling engine and energy storage
This paper presents a comprehensive analysis of the energetic, economic and environmental performance of a micro-combined heat and power (CHP) system that comprises 29.5 m2 of hybrid photovoltaic-thermal (PVT) collectors, a 1-kWe Stirling engine (SE) and energy storage. First, a model for the solar micro-CHP system, which includes a validated transient model for the SE micro-CHP unit, is developed. Parametric analyses are performed throughout a year to evaluate the effects of key component sizes and operating parameters, including collector flow rate, storage tank size, SE micro-CHP flow rate, and battery capacity, on the energetic, economic and environmental performance of the proposed system using real hourly weather data, and thermal and electrical energy demand profiles of a detached house located in London (UK). The optimum component sizes and operating parameters are determined accordingly. The daily and monthly operating characteristics of the system are evaluated, and its annual performance is compared to those of a reference system (gas boiler plus grid electricity), as well as of other alternative solar-CHP systems including a PVT-assisted heat pump system and a standalone PVT system. The results indicate that the installation of such a system can achieve an annual electricity self-sufficiency of 87% and an annual thermal energy demand coverage of 99%, along with annual primary energy savings and carbon emission reduction rate of 35% and 37% relative to the reference system. Over 30 years of operation, the net present value (NPV) of the proposed system is £1990 and the discounted payback period is 28 years. The economics of the proposed system is very sensitive to utility prices, especially the electricity purchase price. Relative to the alternative solar systems, the proposed system offers greater environmental benefits but has a longer payback period. This implies that although the energy saving and emission reduction potential of the proposed system is significant, the initial/capital investment, especially of the SE CHP unit and the PVT collector array, are currently high, so efforts should focus on the cost reduction of these technologies
An experimental study of oil-water flows in horizontal pipes
ABSTRACT This paper reports an effort to investigate the effect of flow velocities and inlet configurations on horizontal oil-water flows in a 32 mm ID acrylic pipe using water and an aliphatic oil (Exxsol D140) as test fluids. The flows of interest were analysed using pressure drop measurements and high-speed photography in an effort to obtain a flow pattern map, pressure gradient profiles and measures of the in situ phase fractions. The experiments reveal a particular effect of the inlet configuration on the observed flow pattern. A horizontal plate, installed at the inlet, generates a transition to stratified flow when the plate height closely matched the in situ water height at high input oil fractions
Thirty Years After Michael E. Porter: What Do We Know About Business Exit?
Although a business exit is an important corporate change initiative, the buyer’s side seems to be more appealing to management researchers than the seller’s because acquisitions imply growth, i.e., success. Yet from an optimistic viewpoint, business exit can effectively create value for the selling company. In this paper we attempt to bring the relevance of the seller’s side back into our consciousness by asking: What do we know about business exit? We start our exploration with Porter (1976), focusing on literature that investigates the antecedents of, barriers to, and outcomes of business exit. We also include studies from related fields such as finance and economics.1 Through this research we determine three clusters of findings: factors promoting business exit, exit barriers, and exit outcomes. Overall, it is the intention of this paper to highlight the importance of business exit for research and practice. Knowing what we know about business exits and their high financial value we should bear in mind that exit need not mean failure but a new beginning for a corporation
- …