Development of a position-sensitive detector for positronium inertial sensing measurements

In the last twenty years, both free fall and interferometry/deflectometry experiments have been proposed for the measurement of the gravitational acceleration on positronium, which is a purely leptonic matter-antimatter atom formed by an electron and its antiparticle (positron). Among the several challenges posed by these experiments is the development of position-sensitive detectors to measure the deflection of positronium in the Earth's gravitational field. In this work, we describe our recent progress in the development of position-sensitive detectors. Two different detection schemes are considered. The first is based on Ps ionization in a strong homogeneous magnetic field and imaging of the freed positron with a microchannel plate. The second scheme is based on scanning the positronium atom distribution on a plane by moving the slit or a material grating with sub-nm accuracy, and counting the atoms crossing the obstacle and those annihilating on it. The possibility of reaching a spatial resolution of around 15 μm using the former detection scheme is shown, and preliminary steps towards the development of a detector following the latter scheme (with potential position sensitivity in the sub-nm range) are described

Characterization of sputtered W–Si–N thin films by a monoenergetic positron beam

A monoenergetic positron beam was employed to characterize the uniformity and the microstructural variation of thermally treated W–Si–N thin film. As the annealing temperature is increased, positrons are found to be progressively trapped in sites rich in silicon. This behavior is explained by the formation of W clusters from which positrons are favorably trapped into the Si–N amorphous matrix. Positron results are discussed together with information obtained on similar samples by Rutheford backscattering, infrared spectroscopy and transmission electron microscopy measurements

Decoration of Buried Surfaces in Si detected by Positron Annihilation Spectroscopy

The terminations of buried surfaces of two different cavity types (nano- and microcavities) produced in the same He+-H+ co-implanted p-type Si (100) sample annealed at 900 °C, are studied and characterized by positron annihilation spectroscopy. The characterization was carried out by means of three complementary positron techniques: Doppler broadening and coincidence-Doppler broadening spectroscopy with a continuous slow positron beam, and lifetime spectroscopy with a pulsed slow positron beam. It was found that the nanocavities have a pristine surface of Si, while the surfaces of the microcavities, formed below protruding blisters, are oxygen decorated. This case study opens the interesting use of the positron spectroscopy tool in the topical subject of empty space for microelectronics applications.Fil: Brusa, R.S.. Universita degli Studi di Trento; ItaliaFil: Macchi, Carlos Eugenio. Universita degli Studi di Trento; Italia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Tandil; ArgentinaFil: Mariazzi, S.. Universita degli Studi di Trento; ItaliaFil: Karwasz, G.P.. Universita degli Studi di Trento; ItaliaFil: Egger, W.. Universität der Bundeswehr München; AlemaniaFil: Sperr, P.. Universität der Bundeswehr München; AlemaniaFil: Kögel, G.. Universität der Bundeswehr München; Alemani

study of positronium formation in nano channelled silicon as a function of sample temperature

Oxidized nanochannel in silicon have been demonstrated to be suitable for positronium (Ps) formation and cooling also at low sample temperature. To investigate the Ps yield and to clarify the Ps formation mechanism we studied, by Positron Annihilation Spectroscopy (PAS), nanochanneled Si p-type samples in the 150–430 K temperature range. Ps yield was found to be constant in the 150–300 K temperature range, then it increases up to ~50% of its value from 350–400 K. This effect is associated to a decrease of the fraction of positrons annihilating in Si and in the SiO2 layer on the nanochannels surface. This finding is compatible with the thermal decrease of the positive charge distribution at the Si/SiO2 interface limiting e+ reaching the SiO2 layer and to a charge rearrangement at the SiO2 surfaces

Positronium cooling at cryogenic temperature for advanced experiments

New Ps spectroscopy measurements, formation of antihydrogen for antimatter-matter comparison experiments, production of Ps beams require the efficient production of cooled positronium in vacuum. At present the most efficient positron-positronium converters are silica based ordered or disordered porous materials, in which formed Ps decreases its kinetic energy by collisional cooling. Recently new positron-positronium converters based on oxidized nanochannels in silicon were found to be very promising because of the tunability of the nanochannel size, which allows to overcome the limits imposed to the Ps cooling by the quantum confinement. With these converters, Ps with temperatures as low as 150 K was detected in vacuum by a TOF apparatus. The Ps formation, quantum confinement, collisional cooling and emission into vacuum from nanochanneled silicon will be discussed in light of recent results

Optimization of a multi-ring detector for Ps time of flight measurements

We have designed a multi-ring detector (MRD) based on Bismuth Germanate (BGO) crystals, coupled to Silicon PhotoMultipliers (SiPM) for measuring the Ps time of flight (TOF). The set-up geometry was optimized by Monte Carlo simulations to take into account at different Ps velocities: (i) the background noise due to backscattered positrons, (ii) the crosstalk between adjacent detectors, (iii) the lifetime of Ps decay. Three parameters were defined to evaluate the different configurations and a figure of merit was obtained. This allows the choice of the best set up configuration for measuring Ps emitted with a particular energy range, optimizing the signal to noise ratio and keeping the acquisition time acceptable

Annihilation of low energy antiprotons in silicon

The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straight path. The final position of the falling antihydrogen will be detected by a position sensitive detector. This detector will consist of an active silicon part, where the annihilations take place, followed by an emulsion part. Together, they allow to achieve 1$$ precision on the measurement of $\bar{g}$ with about 600 reconstructed and time tagged annihilations. We present here, to the best of our knowledge, the first direct measurement of antiproton annihilation in a segmented silicon sensor, the first step towards designing a position sensitive silicon detector for the AE$\mathrm{\bar{g}}$IS experiment. We also present a first comparison with Monte Carlo simulations (GEANT4) for antiproton energies below 5 MeVComment: 21 pages in total, 29 figures, 3 table

Prospects for measuring the gravitational free-fall of antihydrogen with emulsion detectors

The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moir\'e deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the time of flight. Nuclear emulsions can measure the annihilation vertex of antihydrogen atoms with a precision of about 1 - 2 microns r.m.s. We present here results for emulsion detectors operated in vacuum using low energy antiprotons from the CERN antiproton decelerator. We compare with Monte Carlo simulations, and discuss the impact on the AEgIS project.Comment: 20 pages, 16 figures, 3 table

AEGIS at CERN: Measuring Antihydrogen Fall

The main goal of the AEGIS experiment at the CERN Antiproton Decelerator is the test of fundamental laws such as the Weak Equivalence Principle (WEP) and CPT symmetry. In the first phase of AEGIS, a beam of antihydrogen will be formed whose fall in the gravitational field is measured in a Moire' deflectometer; this will constitute the first test of the WEP with antimatter.Comment: Presented at the Fifth Meeting on CPT and Lorentz Symmetry, Bloomington, Indiana, June 28-July 2, 201