Factorial and response surface designs robust to missing observations

Made available in DSpace on 2018-11-26T17:35:05Z (GMT). No. of bitstreams: 0 Previous issue date: 2017-09-01Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Compound optimum design criteria which allow pure error degrees of freedom may produce designs that break down when even a single run is missing, if the number of experimental units is small. The inclusion, in the compound criteria, of a measure of leverage uniformity is proposed in order to produce designs that are more robust to missing observations. By appropriately choosing the weights of each part of the criterion, robust designs are obtained that are also highly efficient in terms of other properties. Applications to various experimental setups show the advantages of the new methods. (C) 2016 Elsevier B.V. All rights reserved.USP UFSCar, Programa Interinst Posgrad Estat, Sao Carlos, SP, BrazilKings Coll London, Dept Math, London, EnglandUniv Estadual Paulista, Dept Bioestat, IB, Botucatu, SP, BrazilUniv Estadual Paulista, Dept Bioestat, IB, Botucatu, SP, BrazilFAPESP: 2014/01818-

Metales pesados en suelos de la planicie costera del Río de la Plata, partidos de Ensenada y Berisso

Los datos de metales pesados determinados en diferentes horizontes de suelo de la Planicie Costera del Gran La Plata, no muestran, en términos generales, gran dispersión ni concentraciones mayores a los valores de referencia regionales aportados por otros autores. Las concentraciones máximas consideradas ecotóxicas en suelos de la región Pampeana brindan valores de 50 mg kg-1 para cobre, 100 mg kg-1 para plomo y 150 mg kg-1 para cinc. Si consideramos los promedios para la totalidad de los horizontes superficiales y subsuperficiales estudiados, se verifican valores de Cu: 45,73 mg kg-1, Zn: 105, 8 mg kg-1 y Pb. 34,38 mg kg-1, con valores decrecientes de desviación standard de Zn-Pb-Cu de 130,81- 51,12- 24,75. Las escasas excepciones se encuentran en sectores cercanos a áreas urbanas y de intensa actividad industrial como por ejemplo en la zona de influencia del Arroyo Doña Flora de la localidad de Ensenada con valores notablemente superiores de Cu: 155 mg kg-1, Zn: 283 mg kg-1 y Pb. 134 mg kg-1. Los suelos de la Planicie Costera presentan dos clases texturales, suelos arenosos en la Llanura Aluvional, cercanos a la línea de costa y suelos ricos en arcillas esmectíticas en la Llanura de Fango. En ambas unidades, los perfiles de suelos, no presentan variaciones verticales importantes de estos elementos. En el primer caso, este hecho se explica por la homogeneidad arenosa de sus materiales y su relativa juventud, siendo la retención de metales baja. En el segundo caso, se atribuye a los materiales arcillosos homogéneos en todo el perfil de suelo que conjuntamente con la materia orgánica generan una alta retención de metales.Fil: Manassero, Marcelo Jorge. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina; Consejo Nacional de Invest.cientif.y Tecnicas. Centro Cientifico Tecnol.conicet - la Plata. Centro de Invest.geologicas (i); Argentina;Fil: Da Silva, Mario Marcelo. Universidad Nacional de la Plata. Facultad de Cs.naturales y Museo. Instituto de Geomorfologia y Suelos; Argentina;Fil: Boff, Laura Daniela. Universidad Nacional de la Plata. Facultad de Cs.naturales y Museo. Instituto de Geomorfologia y Suelos; Argentina;Fil: Hurtado, Martín A.

Critical exponents from parallel plate geometries subject to periodic and antiperiodic boundary conditions

We introduce a renormalized 1PI vertex part scalar field theory setting in momentum space to computing the critical exponents $\nu$ and $\eta$, at least at two-loop order, for a layered parallel plate geometry separated by a distance L, with periodic as well as antiperiodic boundary conditions on the plates. We utilize massive and massless fields in order to extract the exponents in independent ultraviolet and infrared scaling analysis, respectively, which are required in a complete description of the scaling regions for finite size systems. We prove that fixed points and other critical amounts either in the ultraviolet or in the infrared regime dependent on the plates boundary condition are a general feature of normalization conditions. We introduce a new description of typical crossover regimes occurring in finite size systems. Avoiding these crossovers, the three regions of finite size scaling present for each of these boundary conditions are shown to be indistinguishable in the results of the exponents in periodic and antiperiodic conditions, which coincide with those from the (bulk) infinite system.Comment: Modified introduction and some references; new crossover regimes discussion improved; Appendixes expanded. 48 pages, no figure

Prediction techniques on FPGA for latency reduction on tactile internet

Tactile Internet (TI) is a new internet paradigm that enables sending touch interaction information and other stimuli, which will lead to new human-to-machine applications. However, TI applications require very low latency between devices, as the system’s latency can result from the communication channel, processing power of local devices, and the complexity of the data processing techniques, among others. Therefore, this work proposes using dedicated hardware-based reconfigurable computing to reduce the latency of prediction techniques applied to TI. Finally, we demonstrate that prediction techniques developed on field-programmable gate array (FPGA) can minimize the impacts caused by delays and loss of information. To validate our proposal, we present a comparison between software and hardware implementations and analyze synthesis results regarding hardware area occupation, throughput, and power consumption. Furthermore, comparisons with state-of-the-art works are presented, showing a significant reduction in power consumption of ≈1300× and reaching speedup rates of up to ≈52×

The negative influences of the new brazilian forest code on the conservation of riparian forests

More than one million hectares of riparian forests were degraded or altered in Mato Grosso State (Brazil) up to 2009. The aim of the research is to set a comparative scenario to show differences in the quantification of environmental liabilities in riparian forest areas resulting from the change in native vegetation protection rules due to the transition between Laws 4771/65 and 12651/2012. Data collection took place in a marginal stretch of Vermelho River in Rondonópolis County, Mato Grosso State. The following data set was taken into consideration: aerial images derived from unmanned aerial vehicle, Rapid Eye satellite images and orbital images hosted at Google Earth. The spatial resolution of those images was compared. The aerial photos composed a mosaic that was photo-interpreted to generate land use and occupation classes. The riparian forest areas of a rural property were used as parameter, and their environmental situation was compared in 05 meter and 100 meter strips. Thus, by taking into consideration the current rules, 23,501 m2 of area ceased to be an environmental liability within the riparian forest and became a consolidated rural area. According to the previous Forest Code, in a different scenario, that is, in a set of rural properties, the public authority would receive USD 68,600.00 in fines. The new Brazilian Forestry Code of 2012, which replaces the previous one made in 1965, exempts those responsible for rural property from regenerating previously deforested native vegetation — an obligation established by older Forest Code. We have shown that the new Forest Code has diminished the legal responsibility of the rural owners in relation to the maintenance of forest fragments in their properties

Transcriptional profile of maize roots under acid soil growth

Aluminum (Al) toxicity is one of the most important yield-limiting factors of many crops worldwide. The primary symptom of Al toxicity syndrome is the inhibition of root growth leading to poor water and nutrient absorption. Al tolerance has been extensively studied using hydroponic experiments. However, unlike soil conditions, this method does not address all of the components that are necessary for proper root growth and development. In the present study, we grew two maize genotypes with contrasting tolerance to Al in soil containing toxic levels of Al and then compared their transcriptomic responses

CHEMICAL CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY OF HYDROETHANOLIC CRUDE EXTRACT OF EUGENIA FLORIDA DC (MYRTACEAE) LEAVES

Objective: The present study aimed to characterize and quantify the total phenolics, flavonoids and tannins in a hydroethanolic crude extract (70% (v/v) (EB)) of the leaves of E. florida DC, as well as to evaluate the antimicrobial activity of the extract against different species of micro-organisms.Methods: EB was characterized using a mass spectrometer equipped with a direct insertion device for in-stream injection (FIA). Quantitative analyses of major compounds were carried out by spectrophotometry. In addition, we evaluated the sensitivity profiles of different strains of yeast and bacteria against different concentrations of EB.Results: The classes found were in agreement with those described in the literature: flavonoids, tannins, phenolic acids and saponins. EB showed levels of phenolic compounds, flavonoids and tannins equal to 25.82 mg gallic acid equivalents per gram of extract (EAG/g), 8.42 mg quercetin equivalents per gram of extract (EQ/g) and 7.30 mg tannic acid equivalents per gram of extract (AT/g), respectively. In the analysis of antimicrobial activity, EB was more active against yeasts but was not effective against the bacteria used in the test.Conclusion: We can conclude that E. florida DC has antimicrobial potential, due to the presence of bioactive secondary metabolites.Keywords: Phenolics, Micro-organisms, Mass spectrometer, Yeasts, Bacteria, PotentialÂ

Overcoming inertia : drivers of the outsourcing process

Almost all managers have directly or indirectly been involved in the practice of outsourcing in recent years. But as they know, outsourcing is not straightforward. Outsourcing inertia, when companies are slow to adapt to changing circumstances that accommodate higher outsourcing levels, may undermine a firm’s performance. This article investigates the presence of outsourcing inertia and the factors that help managers overcome it. Using statistical evidence, we show that positive performance effects related to outsourcing can accumulate when circumstances change. This is then followed by rapid increases in outsourcing levels (i.e. outsourcing processes). We investigate what gives rise to these outsourcing processes through follow-up interviews with sourcing executives, which suggest five drivers behind outsourcing processes: managerial initiative (using outside experience); hierarchy (foreign headquarters); imitation (of competitors and of similar firms); outsider advice (from external institutions); knowledge sources (using external information). These five drivers all offer scope for managerial action. We tie them to academic literatures and suggest ways of investigating their presence and impact on the outsourcing process. Overall, we conclude that while economizing factors play a key role in explaining how much firms outsource, it is socializing factors that tend to drive outsourcing processes

Non-universality of the absorbing-state phase-transition in a linear chain with power-law diluted long-range connections

Abstract In this work we study the critical behavior of the absorbing state phase transition exhibited by the contact process in a linear chain with power-law diluted long-range connections. Each pair of sites is connected with a probability P ( r ) that decays with the distance between the sites r as 1 / r α . The model allows for a continuous tuning between a standard one-dimensional chain with only nearest neighbor couplings ( α → ∞ ) to a fully connected network ( α = 0 ). We develop a finite-size scaling analysis to obtain the critical point and a set of dynamical and stationary critical exponents for distinct values of the decay exponent α > 2 corresponding to finite average bond lengths and low average site connectivity. Data for the order parameter collapse over a universal curve when plotted after a proper rescaling of parameters. We show further that the critical exponents depend on α in the regime of diverging bond-length fluctuations ( α 3 )