Relationship between anthropometric indices and Mizaj (temperament) in Persian medicine

Background: The process of diagnosis and treatment in Persian medicine (PM) are based on the concept of Mizaj (temperament). Among the indices of Mizaj determination, anthropometric indices are less influenceable regarding age change and other environmental factors. The purpose of this study was to investigate the relationship between anthropometric indices and Mizaj. Methods: Four PM experts determined the Mizaj of 121 participants. Those who had ≥70 agreement in their Mizaj determination by the experts were selected and their anthropometric indices were measured. The best cutoff point of each index and its relationship with the defined Mizaj were extracted using Receiver Operative Characteristic Curve and Binary Logistic Regression. Results: 52 out of 121 participants entered the main study. The warm-Mizaj people had larger dimensions in height, shoulder, chest, palm and sole width, and head height. Cold-Mizaj people had smaller dimensions in weight, height, shoulder, chest and head. High levels of BMI, chest depth and head dimensions had the highest correlation with the wet Mizaj and lower dimensions of these indices had the highest correlation with the dry Mizaj.  Conclusion: Among the anthropometric indices, chest, palm, sole dimensions, head height and weight had the highest correlation with warmness/coldness and BMI, head width and chest dimensions had the highest correlation with wetness/dryness. The BMI which is more closely related to the soft tissue, only correlates with the wetness/dryness, while, bone dimensions are associated with warmness/coldness. Further studies are needed to metricize the anthropometric indices for Mizaj determination

A combination of three surface modifiers for the optimal generation and application of natural hybrid nanopigments in a biodegradable resin

Our purpose was to improve the thermal, mechanical and optimal properties of an epoxy bioresin using optimum hybrid natural pigments previously synthesised in our lab. Next, we searched for the best combinations of factors in the synthesis of natural hybrid nanopigments and then incorporated them into the bioresin. We combined three structural modifiers in the nanopigment synthesis, surfactant, coupling agent (silane) and a mordant salt (alum), selected to replicate mordant textile dyeing with natural dyes. We used Taguchi s design L8 to seek final performance optimisation. We selected three natural dyes, chlorophyll, beta-carotene and beetroot extract, and used two laminar nanoclay types, montmorillonite and hydrotalcite. The thermal, mechanical and colorimetric characterisation of the composite obtained by mixing natural hybrid nanopigments (bionanocomposite) was made. The natural dye interactions with both nanoclays improved the thermal stabilities, colour performance and UV VIS light exposure stability of natural dyes and bioresins. The best bionanocomposite materials were found in an acidic pH [3, 4] environment and by modifying nanoclays with mordant and surfactant during the nanopigment synthesis processWe thank the Spanish Ministry of Economy and Competitiveness for funding Projects DPI2011-30090-C02-02 and DPI2015-68514-R.Micó Vicent, B.; Jordán Núñez, J.; Martinez Verdu, FM.; Balart Gimeno, RA. (2017). A combination of three surface modifiers for the optimal generation and application of natural hybrid nanopigments in a biodegradable resin. Journal of Materials Science. 52(2):889-898. https://doi.org/10.1007/s10853-016-0384-8S889898522Majdzadeh-Ardakani K, Nazari B (2010) Improving the mechanical properties of thermoplastic starch/poly(vinyl alcohol)/clay nanocomposites. Compos Sci Technol 70(10):1557–1563. doi: 10.1016/j.compscitech.2010.05.022Najafi N, Heuzey MC, Carreau PJ (2012) Polylactide (PLA)-clay nanocomposites prepared by melt compounding in the presence of a chain extender. Compos Sci Technol 72(5):608–615. doi: 10.1016/j.compscitech.2012.01.005Acharya H, Srivastava SK, Bhowmick AK (2007) Synthesis of partially exfoliated EPDM/LDH nanocomposites by solution intercalation: structural characterization and properties. Compos Sci Technol 67(13):2807–2816. doi: 10.1016/j.compscitech.2007.01.030Marras SI, Zuburtikudis I, Panayiotou C (2007) Nanostructure vs. microstructure: morphological and thermomechanical characterization of poly(L-lactic acid)/layered silicate hybrids. Eur Polymer J 43(6):2191–2206. doi: 10.1016/j.eurpolymj.2007.03.013Leszczyńska A, Njuguna J, Pielichowski K, Banerjee JR (2007) Polymer/montmorillonite nanocomposites with improved thermal properties: Part I. Factors influencing thermal stability and mechanisms of thermal stability improvement. Thermochim Acta 453(2):75–96. doi: 10.1016/j.tca.2006.11.002Park HM, Lee WK, Park CY, Cho WJ, Ha CS (2003) Environmentally friendly polymer hybrids Part I Mechanical, thermal, and barrier properties of thermoplastic starch/clay nanocomposites. J Mater Sci 38(5):909–915. doi: 10.1023/a:1022308705231Porter D, Metcalfe E, Thomas MJK (2000) Nanocomposite fire retardants—a review. Fire Mater 24(1):45–52. doi: 10.1002/(sici)1099-1018(200001/02)24:13.0.co;2-sRay SS, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28(11):1539–1641. doi: 10.1016/j.progpolymsci.2003.08.002Gao D, Li R, Lv B, Ma J, Tian F, Zhang J (2015) Flammability, thermal and physical-mechanical properties of cationic polymer/montmorillonite composite on cotton fabric. Compos B Eng 77:329–337. doi: 10.1016/j.compositesb.2015.03.061LeBaron PC, Wang Z, Pinnavaia TJ (1999) Polymer-layered silicate nanocomposites: an overview. Appl Clay Sci 15(1–2):11–29. doi: 10.1016/s0169-1317(99)00017-4Karuntarut Sermsantiwanita SP (2012) Preparation of bio-based nanocomposite emulsions: effect of clay type. Prog Org Coat 74:660–666Pascual J, Fages E, Fenollar O, Garcia D, Balart R (2009) Influence of the compatibilizer/nanoclay ratio on final properties of polypropylene matrix modified with montmorillonite-based organoclay. Polym Bull 62(3):367–380. doi: 10.1007/s00289-008-0018-7Beltrán MI, Benavente V, Marchante V, Marcilla A (2013) The influence of surfactant loading level in a montmorillonite on the thermal, mechanical and rheological properties of EVA nanocomposites. Appl Clay Sci 83–84:153–161. doi: 10.1016/j.clay.2013.08.028Bitinis N, Verdejo R, Maya EM, Espuche E, Cassagnau P, Lopez-Manchado MA (2012) Physicochemical properties of organoclay filled polylactic acid/natural rubber blend bionanocomposites. Compos Sci Technol 72(2):305–313. doi: 10.1016/j.compscitech.2011.11.018Sanchez-Garcia MD, Lopez-Rubio A, Lagaron JM (2010) Natural micro and nanobiocomposites with enhanced barrier properties and novel functionalities for food biopackaging applications. Trends Food Sci Technol 21(11):528–536. doi: 10.1016/j.tifs.2010.07.008Huskić M, Žigon M, Ivanković M (2013) Comparison of the properties of clay polymer nanocomposites prepared by montmorillonite modified by silane and by quaternary ammonium salts. Appl Clay Sci 85:109–115. doi: 10.1016/j.clay.2013.09.004Osman MA, Rupp JEP, Suter UW (2005) Effect of non-ionic surfactants on the exfoliation and properties of polyethylene-layered silicate nanocomposites. Polymer 46(19):8202–8209. doi: 10.1016/j.polymer.2005.06.101Wang H, Fang P, Chen Z, Wang S, Xu Y, Fang Z (2008) Effect of silane grafting on the microstructure of high-density polyethylene/organically modified montmorillonite nanocomposites. Polym Int 57(1):50–56. doi: 10.1002/pi.2310Montgomery DC (2008) Design and analysis of experiments. Wiley, HobokenBaena-Murillo E, Micó-Vicent B, Martínez-Verdú FM (2013) Method for the synthesis of nanostructured hybrid pigments having properties that can be syntonized. https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2013110841&recNum=229&docAn=ES2013070026&queryString=(ANA:ES)&maxRec=25813Kohno Y, Inagawa M, Ikoma S, Shibata M, Matsushima R, Fukuhara C, Tomita Y, Maeda Y, Kobayashi K (2011) Stabilization of a hydrophobic natural dye by intercalation into organo-montmorillonite. Appl Clay Sci 54(3):202–205. doi: 10.1016/j.clay.2011.09.001Kaneko Y, Iyi N, Bujdak J, Sasai R, Fujita T (2004) Effect of layer charge density on orientation and aggregation of a cationic laser dye incorporated in the interlayer space of montmorillonites. J Colloid Interface Sci 269(1):22–25. doi: 10.1016/s0021-9797(03)00602-7Silva AA, Dahmouche K, Soares BG (2011) Nanostructure and dynamic mechanical properties of silane-functionalized montmorillonite/epoxy nanocomposites. Appl Clay Sci 54(2):151–158. doi: 10.1016/j.clay.2011.08.002Park S-J, Kim B-J, Seo D-I, Rhee K-Y, Lyu Y-Y (2009) Effects of a silane treatment on the mechanical interfacial properties of montmorillonite/epoxy nanocomposites. Mater Sci Eng A 526(1–2):74–78. doi: 10.1016/j.msea.2009.07.023Khraisheh MAM, Al-Ghouti MA, Allen SJ, Ahmad MN (2005) Effect of OH and silanol groups in the removal of dyes from aqueous solution using diatomite. Water Res 39(5):922–932. doi: 10.1016/j.watres.2004.12.008Fahn R, Fenderl K (1983) Reaction-products of organic-dye molecules with acid-treated montmorillonite. Clay Miner 18(4):447–458. doi: 10.1180/claymin.1983.018.4.10Kohno Y, Totsuka K, Ikoma S, Yoda K, Shibata M, Matsushima R, Tomita Y, Maeda Y, Kobayashi K (2009) Photostability enhancement of anionic natural dye by intercalation into hydrotalcite. J Colloid Interface Sci 337(1):117–121. doi: 10.1016/j.jcis.2009.04.065Capilla P, Pujol J (2002) Fundamentos de Colorimetría. Universitat de ValenciaGilabert EJ, Verdú FMM (2007) Medida de la luz y el color. Editorial de la UPV. In: Color psicofísico, pp 185–221Zhao H, Nagy KL (2004) Dodecyl sulfate–hydrotalcite nanocomposites for trapping chlorinated organic pollutants in water. J Colloid Interface Sci 274(2):613–624. doi: 10.1016/j.jcis.2004.03.05

Synthesis of thermal insulator using chicken feather fibre in starch-clay nanocomposites

Incorporating chicken feather fibre (CFF) into natural based-nanocomposite comprising of glycerine plasticizedcassava starch binder with bentonite (BNT) as nanofiller, a thermal insulator (TIN) was synthesized. Central Composite Design (CCD) Response Surface Methodology was employed to carry out the experimental design using two factors (CFF and BNT) along with one response (thermal conductivity) to produce nine materials as insulators, comprising of 0%, 5%, and 10% BNT based on 8 g initial weight of CFF. A sample without CFF was used as the control. Developed thermal insulators were subjected to thermal conductivity tests using Lee's disc method at a steady state. The best insulator is TIN-4 with the lowest thermal conductivity of 0.0313 W/(mK) and the highest insulation property of 114.63 m2k/W, while TIN-10 with no CFF has the highest thermal conductivity of 0.0549 W/(mk) and lowest insulation property of 48.1603 m2k/W. Proportionate use of chicken feather fibre in starch-clay nanocomposite will help synthesize an effective thermal insulator with minimum cost

Recent advances and perspectives on starch nanocomposites for packaging applications

Starch nanocomposites are popular and abundant materials in packaging sectors. The aim of this work is to review some of the most popular starch nanocomposite systems that have been used nowadays. Due to a wide range of applicable reinforcements, nanocomposite systems are investigated based on nanofiller type such as nanoclays, polysaccharides and carbonaceous nanofillers. Furthermore, the structures of starch and material preparation methods for their nanocomposites are also mentioned in this review. It is clearly presented that mechanical, thermal and barrier properties of plasticised starch can be improved with well-dispersed nanofillers in starch nanocomposites

A social network analysis on immigrants and refugees access to services in the malaria elimination context

Abstract Background There has been significant progress in eliminating malaria in Iran. The aim of this study is to investigate the structure of inter-organizational collaboration networks in the field of unauthorized immigrants and refugees access to services in order to eliminate malaria. Methods This study employed social network analysis, in which nodes represented stakeholders associated with providing access of immigrants and refugees to services in the field of malaria elimination, and ties indicated the level of collaboration. This study adopted socio-centric analysis and the whole network was studied. In this regard, 12 districts of the malaria-endemic area in Iran were selected. Participants included 360 individuals (30 representatives of the organization/group in each district). The data were gathered by interview, using the levels of collaboration scale. UCINET 6 was used for data analysis. The indices of density, centralization, reciprocity, and clustering were investigated for each twelve network and at each level of collaboration. Results The average density of the networks was 0.22 (SD: 0.04). In districts with a high incidence of imported malaria, the values of network density and centralization were high and the networks comprised of a larger connected component (less isolated clusters). There were significant correlations between density of network (r = 0.66, P = 0.02), degree centralization (r = 0.65, P = 0.02), betweenness centralization (r = 0.76, P = 0.004), and imported malaria cases. In general, the degree centrality and betweenness centrality of the organizations of health, district governor, and foreign immigrants’ affairs were higher. In all networks, 60% of the relationships were bilateral. At a higher level of collaboration, the centralization declined and reciprocity increased. The average of betweenness centralization index was 22.76 (SD = 3.88). Conclusions Higher values of network indices in border districts and districts with more cases of imported malaria, in terms of density and centralization measures, can propose the hypothesis that higher preparedness against the issue and centralization of power can enable a better top-down outbreak management, which needs further investigations. Higher centrality of governmental organizations indicates the need for involving private, non-governmental organizations and representatives of immigrant and refugee groups. Recognition of the existing network structure can help the authorities increase access to malaria prevention, diagnosis, and treatment services among immigrants and refugees