Geochemistry of the Panzhihua Mafic Layered Intrusion (SW China): Petrogenetic Implications for its Giant V-Ti-Magnetite Deposit

published_or_final_versio

Efficient Photoelectrochemical Performance of Gamma Irradiated gC3N4 and its g-C3N4@BiVO4 Heterojunction for Solar Water Splitting

This is the author accepted manuscript. The final version is available from the American Chemical Society via the DOI in this recordComprehensive experimental and density functional theory simulations have been performed for the enhanced photoelectrochemical performance of gamma irradiated g-C3N4 and its heterojunction with BiVO4. The structure and morphology of g-C3N4@BiVO4 as a heterojunction were analyzed and verified from the correlation of experimental and theoretical data. It is found that gamma radiations have changed the bonding structure of g-C3N4 which ultimately reduces the optical bandgap energy. Moreover, the performance of gamma-irradiated g-C3N4 is two-fold, compared to that of non-irradiated one; increases from 3.59 to 5.86 µAcm-2 at 1.23 V versus Ag/AgCl in 0.5 M Na2SO4 electrolyte solution (pH 7). Finally, it is observed that the performance of gamma irradiated g-C3N4 in g-C3N4@BiVO4 heterojunction increased from 0.53 mA cm-2 to 1.38 mA cm-2, compared to that of the non–irradiated one. In summary, it has been concluded that gamma-irradiated g-C3N4 and its heterojunction is potentially be applied in PEC solar water splitting.National University of Malaysi

Provenance and tectonic setting of the Neoproterozoic Yanbian Group, western Yangtze Block (SW China)

Tectonic evolution of the Yangtze Block of South China during Neoproterozoic time has been a major focus of debate and is important in the reconstruction of the Rodinian supercontinent. The Yanbian Group in the western margin of the Yangtze Block is a well-preserved Neoproterozoic volcanic-sedimentary sequence and provides a rare opportunity to examine the provenance and tectonic setting. It consists of a lower part composed of ∼1500 m thick basaltic lavas and an upper part of ∼3500 m thick flysch deposits. The flysch sequence contains typical deep marine turbidites consisting mainly of fine-grained volcaniclastic sandstones and mudstones, indicating a submarine fan depositional system. Detrital zircon dating yields ages ranging from ca. 865 Ma to 1000 Ma with two peaks at ca. 900 Ma and 920 Ma, respectively. The Yanbian Group is intruded by the ∼860 Ma Guandaoshan dioritic pluton, constraining its depositional age at ca. 870 Ma. The sandstones contain abundant feldspar and lithic fragments with minor amounts of quartz and have an average composition of Q 16F 35L 49, suggesting a proximal source and an undissected to transitional arc setting. The lithic fragments in the sandstones point to andesitic and felsic volcanic rock sources. The sandstones and mudstones have intermediate SiO 2/Al 2O 3 (typically 3-6), high Fe 2O 3 + MgO contents (5-12 wt%), and moderate to high K 2O/Na 2O ratios (generally 0.1-1 and 1-10 for sandstones and mudstones, respectively). In comparison with average upper continental crust, they show strong negative Nb-Ta anomalies, slight depletion of Zr-Hf, La and Th, but moderate enrichment of V, Cr, Ni, and Sc. These rocks show LREE enrichment (La/Yb N = 5.3-7.4) with flat HREE, and pronounced negative Eu anomalies (Eu/Eu * = 0.6-0.74) in chondrite-normalized REE patterns, similar to post-Archean shales. Geochemical data for these rocks suggest an arc setting and intermediate-felsic volcanic source, consistent with a back-arc basin scenario for the basaltic lavas in the lower Yanbian Group. Together with regional geological evidence, the turbidites of the Yanbian Group strongly support a model in which the western margin of the Yangtze Block was a major magmatic arc, active probably from ∼920 Ma to 740 Ma, a period of more than 180 million years. © 2008 Elsevier B.V. All rights reserved.postprin

RhoE/ROCK2 regulates chemoresistance through NF-κB/IL-6/ STAT3 signaling in hepatocellular carcinoma

published_or_final_versio

Parental line selection for yield contributing character of rice (Oryza sativa)

The prime objective of any hybrid program is to bring the desirable genes present in the parent into a single genetic background. Therefore, an experiment was conducted to evaluate the parental performance at the experimental farm of Bangabandhu Sheikh Mujibur Rahman Agricultural University. Nine A (male sterile) lines and Four R (restoral) lines were used here. To consider their performance various agronomic trait was selected and most emphasis was provide for plant height, days to maturity and other yield contributing character. The characters studied in this investigation exhibited low to moderate range of variability and heritability. Out of all RGBU0014A perform the height days to maturity then others. Although yield is more or less similar for the restorer parent, but considering other agronomic yield contributing trait RGBU003A, RGBU002A, RGBU009A can be selected to cross with superior restoral SL8 R and Mitali R to obtain ideal plant type.Int. J. Agril. Res. Innov. & Tech. 7 (1): 46-50, June, 201

Optimum INR intensity and therapeutic INR control in patients with mechanical heart valve prosthesis on warfarin oral anticoagulation at Dr George Mukhari academic hospital: a three-year retrospective study

Background: Available evidence suggest that the optimum prothrombin time-international normalised ratio (PT-INR) intensities recommended for anticoagulation of patients with mechanical heart valve prosthesis may not apply to all race groups. Optimal PT-INR target ranges and effectiveness of warfarin oral anticoagulation were determined among black South African patients fitted with St Jude bileaflet mechanical heart valve prosthesis  (SJBMHVP) at Dr George Mukhari Academic Hospital (DGMAH).Methods: A convenience sample of 95 medical records of patients fitted with SJBMHVP from 1994 until 2013 was reviewed. Optimum PT-INR target ranges were estimated using two different methods: the classical two PT-INR target level method and the alternative, PT-INR specific incident rate method. The quality of warfarin anticoagulation was assessed using the fraction in therapeutic range method.Results: Optimum PT-INR target ranges for all participants fitted with SJBMHVP in the aortic position was estimated to be 2.0–3.5 and 2.6–3.5, respectively, by the classical and alternative methods. That of the patients with mitral valve replacement was estimated to be in the range 2.6–3.5 by the classical method and that of patients with double heart valve  replacement was estimated to be < 3.5 by both methods. The quality of warfarin anticoagulation of participants with SJBMHVP replacement wasfound to be inadequate as indicated by percentage time in treatment range (TTR) of 49.7% for all study participants compared with the ideal TTR of 70% and above.Conclusion: Optimum Caucasian-based PT-INR intensities recommended for oral anticoagulation of patients fitted with mechanical heart valve prosthesis are applicable to black patients fitted with SJBMHVP at DGMAH.Keywords: black South African patients, heart valve prosthesis, optimal PT-INR, time in treatment range, warfarin oral anticoagulatio

Factors influencing project delay : a case study of the Vale Malaysia Minerals Project (VMMP)

Delays are one of the biggest problems faced by the construction industry. The delays in construction projects have significant financial and social impact to parties involved in the projects. The main objective of this study is to explore the causes of delay in the Vale Malaysia Minerals Project (VMMP) in Lumut, Perak. This study was conducted by using a qualitative approach. A series of face to face interviews were conducted with an expert from construction organization and VMMP staff. Responses were analysed qualitatively using content analysis and a comprehensive interpretation was developed. The results revealed that several factors that contribute to the delay in VMMP completion, i.e. communication, delayed in material delivery, and poor management on site, etc. Time and cost overrun were the common effects of delays in construction project. The findings of this study will help the project manager or the client to take necessary measures and to use of supply chain management to avoid delays of project completion in a construction project

Advances in Mathematical Modeling of Gas-Phase Olefin Polymerization

Mathematical modeling of olefin polymerization processes has advanced significantly, driven by factors such as the need for higher-quality end products and more environmentally-friendly processes. The modeling studies have had a wide scope, from reactant and catalyst characterization and polymer synthesis to model validation with plant data. This article reviews mathematical models developed for olefin polymerization processes. Coordination and free-radical mechanisms occurring in different types of reactors, such as fluidized bed reactor (FBR), horizontal-stirred-bed reactor (HSBR), vertical-stirred-bed reactor (VSBR), and tubular reactor are reviewed. A guideline for the development of mathematical models of gas-phase olefin polymerization processes is presented

Influence of Ionophore Supplementation on Growth Performance, Dietary Energetics and Carcass Characteristics in Finishing Cattle during Period of Heat Stress.

Forty-eight crossbred heifers (378.1±18 kg) were used in a 56-d feeding trial (four pens per treatment in a randomised complete block design) to evaluate the influence of ionophore supplementation on growth performance, dietary energetics and carcass characteristics in finishing cattle during a period of heat stress. Heifers were fed a diet based on steam-flaked corn (2.22 Mcal NEm/kg) with and without an ionophore. Treatments were: i) control, no ionophore; ii) 30 mg/kg monensin sodium (RUM30); iii) 20 mg/kg lasalocid sodium (BOV20), and iv) 30 mg/kg lasalocid sodium (BOV30). Both dry matter intake (DMI) and climatic variables were measured daily and the temperature humidity index (THI) was estimated. The maximum THI during the study averaged 93, while the minimum was 70 (THI average = 79.2±2.3). Compared to controls, monensin supplementation did not influence average daily gain, the estimated NE value of the diet, or observed-to-expected DMI, but tended (p = 0.07) to increase (4.8%) gain to feed. Compared to controls, the group fed BOV30 increased (p≤0.03) daily gain (11.8%), gain to feed (8.3%), net energy of the diet (5%), and observed-to-expected DMI (5.2%). Daily weight gain was greater (7.6%, p = 0.05) for heifers fed BOV30 than for heifers fed MON30. Otherwise, differences between the two treatments in DMI, gain to feed, and dietary NE were not statistically significant (p>0.11). Plotting weekly intakes versus THI, observed intake of controls was greater (p<0.05) at THI values ≤77 than ionophore groups. When THI values were greater than 79, DMI of control and MON30 were not different (p = 0.42), although less than that of groups fed lasalocid (p = 0.04). Variation in energy intake was lower (p>0.05) in the ionophores group (CV = 1.7%) than in the control group (CV = 4.5%). Inclusion of ionophores in the diet resulted in relatively minor changes in carcass characteristics. It is concluded that ionophore supplementation did not exacerbate the decline of DM intake in heat-stressed cattle fed a high-energy finishing diet; on the contrary, it stabilised feed intake and favoured feed efficiency. Ionophore supplementation reduced estimated maintenance coefficients around 10% in finishing cattle during a period of heat stress. This effect was greatest for heifers supplemented with 30 mg lasalocid/kg of diet