Detailed radiological study of the patent ductus arteriosus: a computed tomography study in the Polish population

Background: The aim of the study was to perform qualitative and quantitative computed tomography (CT) angiography-based evaluation of patent ductus arteriosus (PDA) morphology and its influence on morphology of the great vessels. Materials and methods: Two-thousand twenty-two patients underwent 64-slice or dual-source CT and were retrospectively screened for the presence of PDA. Those who had presence of PDA underwent evaluation of its anatomy and morphology. Results: Thirty-two adult patients with PDA were evaluated (mean age 41.4 ± 17.4 years). Subjects with PDA had a higher value of aortic isthmus (p = 0.0148), main pulmonary artery (p < 0.0001), right (p =0.0007) and left (p = 0.0074) pulmonary arteries diameters than individuals from control group (16 adults, median age 43.3 ± 12.4 years). Types A, B, C, D, and E of PDA morphology occurred in 16 (50%), 3 (9%), 9 (28%), 2 (6%), and 2 (6%) patients, respectively. Subjects with the type A configuration of PDA tended to have a larger diameter at the aortic orifice (10.2 ± 5.2 mm vs. 6.4 ± 4.9 mm, p = 0.09) and a larger maximal diameter (10.3 ± 5.3 mm vs. 7.1 ± 4.7 mm, p = 0.14) compared to subjects with the type C configuration. The values of minimal, mean, and maximal diameters of PDA were 4.7 ± 1.9 mm, 7.0 ± 3.2 mm, and 9.4 ± 5.0 mm, respectively. The Spearman correlation coefficient between the main pulmonary artery and PDA diameters demonstrated a good correlation for minimal (r = 0.70, p < 0.001), mean (r = 0.62, p = 001), and maximal (r = 0.60, p = 0.0003) PDA diameters. Conclusions: Computed tomography enables quantitative and qualitative evaluation of PDA, including its type of morphology, length, and diameters. In the evaluated adult population with PDA, the majority of patients had dilation of the aortic isthmus and pulmonary arteries. PDA diameters correlate with diameters of the pulmonary arteries and this correlation is strongest between PDA diameter at the narrowest site and main pulmonary artery

Single InGaAs Quantum Dot Coupling to the Plasmon Resonance of a Metal Nanocrystal

We report the observation of coupling of single InGaAs quantum dots with the surface plasmon resonance of a metal nanocrystal, which leads to clear enhancement of the photoluminescence in the spectral region of the surface plasmon resonance of the metal structures. Sharp emission lines, typical for single quantum dot emission, are observed, whereas for reference samples, only weak continuous background emission is visible. The composite metal–semiconductor structure is prepared by molecular beam epitaxy utilizing the principle of strain-driven adatom migration for the positioning of the metal nanocrystals with respect to the quantum dots without use of any additional processing steps

Computed tomography in the evaluation of the anomalous origin of the coronary artery: coexistence with other congenital heart disease in an adult population

Background: The aim of the study is to assess the prevalence of anomalous origin of the coronary artery in cardiac computed tomography (CT) and to evaluate its coexistence with other congenital heart disease. Materials and methods: 7,115 patients, who underwent 64-slice or dual source cardiac CT in the years 2005–2011 were screened for the presence of anomalous origin of the coronary artery. Results: Anomalous origin of coronary artery was found in 62 (0.87%) patients (34 males, mean age 57.4 ± 15.1 years). Anomalous aortic and pulmonary origin of coronary artery concerned 59 (0.83%) and 3 (0.04%) cases, respectively. Concomitant heart defects were observed in 5 (0.07%) patients, all with anomalous aortic origin of coronary artery. Malformations included transposition of great arteries (4 patients) and single ventricle in (1 patient). Conclusions: The incidence of anomalous origin of a coronary artery in cardiac CT is similar to invasive coronary angiography. In an adult population the vast majority of those anomalies are isolated abnormalities without concomitant other congenital heart defects

Interatomic potentials of van der Waals dimers Hg2Hg_{2} and Cd2Cd_{2} : probing discrepancies between theory and experiment

Results of new all-electron ab initio calculations and revisit of experimental studies of the interatomic potentials of lower-lying ungerade excited and ground electronic energy states of the Hg_{2} and Cd_{2} van der Waals complexes are used as probes of discrepancies between theory and experiment. From simulations of the previously and presently measured LIF excitation and dispersed emission spectra new analytical representations of the excited- and the ground-state interatomic potentials are proposed. An inverted perturbation approach was also used to improve the studied interatomic potentials. The comparison of the new ab-initio calculated potentials with the results of the analyses illustrates an improve theory-to-experiment agreement for such a demanding system like Hg_{2} or Cd_{2}

5,6,7,8-Tetra­hydro­quinoline 1-oxide hemihydrate

In the title compound, C9H11NO·0.5H2O, the asymmetric unit contains two similar mol­ecules of 5,6,7,8-tetra­hydro­quinoline 1-oxide and one water mol­ecule. The water mol­ecule links the two O atoms of both independent N-oxides into dimers via O—H⋯O hydrogen bonds, forming a three-dimensional network along [101], which is additionally stabilized by weak C—H⋯O inter­molecular inter­actions. In each mol­ecule, the saturated six-membered rings exist in a conformation inter­mediate between a half-chair and sofa

LAGUNA in Polkowice-Sieroszowice mine in Poland

The Polkowice–Sieroszowice mine in one of the seven candidates for the future pan-European underground laboratory studied in the framework of the LAGUNA project. We review the evidence that from the point of view of geology, long-term plans for the mine and existing infrastructure, and support of the authorities this is a perfect place to host the 100 kton liquid argon detector GLACIER

On the electropolishing and anodic oxidation of Ti-15Mo alloy

This paper presents research on modifying the surface of Ti-15Mo alloy using electropolishing and anodic passivation. The electropolishing process was carried out in solutions containing sulfuric acid, ethylene glycol, ammonium fluoride and oxalic acid. Whereas a voltage range from 20 to 100 V and a 1 M orthophosphoric acid solution were used during the anodic passivation. The influence of above mentioned processes parameters on the quality of the obtained oxide layer on Ti-15Mo alloy was investigated. The analysis of Ti-15Mo surface after modification was performed using scanning electron microscopy (SEM), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), ellipsometry, and mechanical tests. Moreover, the corrosion resistance was investigated using a potentiostatic method in Ringer's solution. It was found that electropolishing leads to an increase in the surface homogeneity and to the form of an oxide layer, which consisted of TiO2 and MoO3. Whereas the oxide layers obtained during anodic passivation were characterized by different properties depending on the applied voltage. The anodic passivation at various voltages (20-100 V) increased the surface wettability (94.5°-87.6°) in comparison to the electropolished sample (97.5°). Moreover, the obtained oxide layer after anodization exhibited a high hardness. The electrolytic polishing and anodic passivation of Ti-15Mo also improved corrosion resistance of the alloy in contact with Ringer's solution. The sample anodized at 80 V presented the highest corrosion resistance by the smallest corrosion current density (1.4 nA cm-2) and the highest polarization resistance (37.4 MΩ cm2). © 2016 Elsevier Ltd. All rights reserved

Religious transformations in the Middle Ages: towards a new archaeological agenda

The study of religious change in Europe between the collapse of the Roman Empire and the Reformation forms one of the cornerstones of medieval archaeology but has been riven by period, denominational and geographical divisions. This paper lays the groundwork for a fundamental rethink of archaeological approaches to medieval religions, by adopting a holistic framework that places Christian, pagan, Islamic and Jewish case studies of religious transformation in a long-term, comparative perspective. Focused around the analytical themes of ‘hybridity and resilience’ and ‘tempo and trajectories’, our approach shifts attention away from the singularities of national narratives of religious conversion towards a deeper understanding of how religious beliefs, practices and identity were renegotiated by medieval people in their daily lives