HIGH VERTICAL RESOLUTION NUMERICAL SIMULATION OF SUMMER FLOWS IN CATALONIA. IMPLICATIONS TO SPATIAL AND TEMPORAL VARIABILITY OF OZONE AND PM10 LEVELS

The aim of this study is to analyze the dynamics of the sea-breeze and its effects on the 3D pollution transport using ground based monitoring station, Sodar measurements and numerical simulation. We use the non-hydrostatic atmospheric model MM5 coupled to the photochemical model CMAQ. Measurements are basically focused on the determination of the propagation of the sea breeze front inland and on the validation of the model outputs. Numerical simulation is useful not only to study the inland propagation, but also to analyze the thermal internal boundary layer, the head wind and all the interesting components of the sea breeze circulation phenomena, including the transport of pollutants inside it

Effect of past century mining activities on sediment properties and toxicity to freshwater organisms in northern Sweden

The release of toxic metals from local mining activities often represents a severe environmental hazard for nearby lake ecosystems. Previous studies on the impact of mining have primarily focused on single lakes, with less emphasis on spatial and temporal recovery patterns of multiple lakes within the same catchment, but with different hydrological connection and distance to the pollutant source. This knowledge gap prevents us from assessing the real environmental risk of abandoned mines and understanding ecosystem recovery. This study explores the intensity and spatial patterns of sediment contamination and the potential for ecosystem recovery in three lakes in close vicinity of a lead (Pb) and zinc (Zn) mine in Sweden that has been inoperative for >20 years. Dated (210Pb and 137Cs) sediment cores from each lake were used to reconstruct temporal patterns in trace element deposition and relate those with past mining activities. Results show that all lakes were affected by mining, indicated by increasing Pb and Zn concentrations and decreasing organic matter content, at the onset of mining. However, the extent and timing of mining impact differed between lakes, which was partly ascribed to differences in the historical use of tailings and settling ponds. Assessment of toxicity levels in sediments, based on normalized Probable Effect Concentration Quotient (PEC-Q) to organic matter content, provided more consistent results with the historical mining than conventional methods, showing a decreasing impact in lakes once the operations ceased. Still, sediment Pb concentrations were > 10 times higher than pre-mining values, evidencing the urgent need for remediation actions in the study lakes. This study highlights the importance of considering spatial heterogeneity in metal deposition, sediment organic matter content, and hydrological connectivity with tailings when risk assessments are performed in mining-impacted lakes. The use of normalized PEC-Q in toxic assessments is also recommended

Evaluating the Performance of a Regional-Scale Photochemical Modelling System: Part I Ozone Predictions

We present a detailed evaluation of the seasonal performance of the Community Multiscale Air Quality (CMAQ) modelling system and the PSU/NCAR meteorological model coupled to a new Numerical Emission Model for Air Quality (MNEQA). The combined system simulates air quality at a fine resolution (3 km as horizontal resolution and 1 h as temporal resolution) in north-eastern Spain, where problems of ozone pollution are frequent. An extensive database compiled over two periods, from May to September 2009 and 2010, is used to evaluate meteorological simulations and chemical outputs. Our results indicate that the model accurately reproduces hourly and 1-h and 8-h maximum ozone surface concentrations measured at the air quality stations, as statistical values fall within the EPA and EU recommendations. However, to further improve forecast accuracy, three simple bias-adjustment techniques mean subtraction (MS), ratio adjustment (RA), and hybrid forecast (HF) based on 10 days of available comparisons are applied. The results show that the MS technique performed better than RA or HF, although all the bias-adjustment techniques significantly reduce the systematic errors in ozone forecasts

A performance evaluation of MM5/MNEQA/CMAQ air quality modelling system to forecast ozone concentrations in Catalonia

We examine the ability of a modelling system to forecast the formation and transport of ozoneover Catalonia, at the NE of the Iberian Peninsula. To this end, the Community MultiscaleAir Quality (CMAQ) modelling system developed by the United States Environmental ProtectionAgency (US EPA) and the PSU/NCAR mesoscale modelling system MM5 are coupled to a newemission model, the Numerical Emission Model for Air Quality (MNEQA). The outputs of themodelling system for the period from May to October 2008 are compared with ozone measure-ments at selected air-monitoring stations belonging to the Catalan Government. Results indicatea good behaviour of the model in reproducing diurnal ozone concentrations, as statistical valuesfall within the EPA and EU regulatory frameworks

Electrónica de Potencia y Créditos ECTS: Experiencia Piloto y Material Docente Empleado

En esta comunicación se presenta por una parte la adaptación de la asignatura Electrónica de Potencia a créditos ECTS, realizado en la Escuela Politécnica Superior de Jaén dentro de la Experiencia Piloto Andaluza y por otra, un trabajo realizado en el Departamento de Ingeniería Electrónica de la Universidad de Jaén, sobre ésta materia, con el que se pretende potenciar la docencia de la misma; trabajo realizado sobre las diferentes unidades didácticas, en formato electrónico interactivo, incorporando hipertexto, gráficos, enlaces a sitios Web y problemas propuestos con sus correspondientes enlaces a las herramientas de simulación como Mathcad y Pspice

Influence of different surgical techniques on primary implant stability in the posterior maxilla: a randomized controlled clinical trial

Background and objective Primary stability (PS) is remarkable for secondary stability and implant success. Surgical technique modifications seem to improve primary stability, especially in poor quality bone. The aim of this study was to compare the insertion torque (IT) and implant stability quotients (ISQ) of implants placed with underpreparation, expanders, and standard surgical instrumentation in different bone types. Material and methods This randomized controlled clinical trial enrolled 108 patients (n=108 implants) distributed in three study groups: group 1 (n=36) underpreparation technique, group 2 (n=36) expander technique, and group 3 (n=36) conventional drilling. IT was recorded with a torque indicator. ISQ was recorded with resonance frequency analysis immediately after surgery. Results ISQ values were associated with the patient’s bone quality and were higher in bone quality type II (76.65) and type III (73.60) and lower in bone quality type IV (67.34), with statistically significant differences (p<0.0001). Lower stability results were obtained when conventional drilling (69.31) was used compared to the use of underpreparation (74.29) or expanders (73.99) with a level of significance of p=0.008 and p=0.005, respectively. Conclusions The surgical technique influences the PS when there is low-quality bone. In low-quality bones, conventional drilling obtains lower ISQ values. Clinical relevance Replace the conventional drilling technique for an alternative, underpreparation or expanders, in lowquality bone in order to achieve greater primary stabilityUniversidad de Granada/ CBU

Understanding the local and remote source contributions to ambient O3 during a pollution episode using a combination of experimental approaches in the Guadalquivir valley, southern Spain

The Guadalquivir Valley is one of three major O3 hotspots in Spain. An airborne and surface measurement campaign was carried out from July 9th to 11th, 2019 to quantify the local/regional O3 contributions using experimental approaches. Air quality and meteorology data from surface measurements, a microlight aircraft, a helium balloon, and remote sensing data (TROPOMI-NO2-ESA) were used to obtain the 3D distribution of O3 and various tracer pollutants. O3 accumulation over 2.5 days started with inputs from oceanic air masses transported inland by sea breezes, which drew O3 and its precursors from a local/regional origin to the northeastern end of the basin. The orographic–meteorological setting of the valley caused vertical recirculation of the air masses inside the valley that caused the accumulation by increasing regional background O3 concentration by 25–30 ppb. Furthermore, possible Mediterranean O3 contributions and additional vertical recirculation through the entrainment zone of the convective boundary layer also contributed. Using particulate matter finer than 2.5 μm (PM2.5), ultrafine particles (UFP), and black carbon (BC) as tracers of local sources, we calculated that local contributions increased regional O3 levels by 20 ppb inside specific pollution plumes transported by the breeze into the valley, and by 10 ppb during midday when flying over an area with abundant agricultural burning during the morning. Air masses that crossed the southern boundaries of the Betic system at mid-altitude (400–1850 m a.s.l.) on July 10th and 11th may have provided additional O3. Meanwhile, a decreasing trend at high altitudes (3000–5000 m a.s.l.) was observed, signifying that the impact of stratospheric O3 intrusion decreased during the campaign

Reconstructing the impact of human activities in a NW Iberian Roman mining landscape for the last 2500 years

This article was made available through the Brunel Open Access Publishing Fund.Little is known about the impact of human activities during Roman times on NW Iberian mining landscapes beyond the geomorphological transformations brought about by the use of hydraulic power for gold extraction. We present the high-resolution pollen record of La Molina mire, located in an area intensely used for gold mining (Asturias, NW Spain), combined with other proxy data from the same peat core to identify different human activities, evaluate the strategies followed for the management of the resources and describe the landscape response to human disturbances. We reconstructed the timing and synchronicity of landscape changes of varying intensity and form occurred before, during and after Roman times. An open landscape was prevalent during the local Late Iron Age, a period of relatively environmental stability. During the Early Roman Empire more significant vegetation shifts took place, reflected by changes in both forest (Corylus and Quercus) and heathland cover, as mining/metallurgy peaked and grazing and cultivation increased. In the Late Roman Empire, the influence of mining/metallurgy on landscape change started to disappear. This decoupling was further consolidated in the Germanic period (i.e., Visigothic and Sueve domination of the region), with a sharp decrease in mining/metallurgy but continued grazing. Although human impact was intense in some periods, mostly during the Early Roman Empire, forest regeneration occurred afterwards: clearances were local and short-lived. However, the Roman mining landscape turned into an agrarian one at the onset of the Middle Ages, characterized by a profound deforestation at a regional level due to a myriad of human activities that resulted in an irreversible openness of the landscape. © 2014 The Authors

Phenomenology of high-ozone episodes in NE Spain

Ground-level and vertical measurements (performed using tethered and non-tethered balloons), coupled with modelling, of ozone (O3), other gaseous pollutants (NO, NO2, CO, SO2) and aerosols were carried out in the plains (Vic Plain) and valleys of the northern region of the Barcelona metropolitan area (BMA) in July 2015, an area typically recording the highest O3 episodes in Spain. Our results suggest that these very high O3 episodes were originated by three main contributions: (i) the surface fumigation from high O3 reservoir layers located at 1500-3000 m a.g.l. (according to modelling and non-tethered balloon measurements), and originated during the previous day(s) injections of polluted air masses at high altitude; (ii) local/regional photochemical production and transport (at lower heights) from the BMA and the surrounding coastal settlements, into the inland valleys; and (iii) external (to the study area) contributions of both O3 and precursors. These processes gave rise to maximal O3 levels in the inland plains and valleys northwards from the BMA when compared to the higher mountain sites. Thus, a maximum O3 concentration was observed within the lower tropospheric layer, characterised by an upward increase of O3 and black carbon (BC) up to around 100-200 m a.g.l. (reaching up to 300 µg m−3 of O3 as a 10 s average), followed by a decrease of both pollutants at higher altitudes, where BC and O3 concentrations alternate in layers with parallel variations, probably as a consequence of the atmospheric transport from the BMA and the return flows (to the sea) of strata injected at certain heights the previous day(s). At the highest altitudes reached in this study with the tethered balloons (900-1000 m a.g.l.) during the campaign, BC and O3 were often anti-correlated or unrelated, possibly due to a prevailing regional or even hemispheric contribution of O3 at those altitudes. In the central hours of the days a homogeneous O3 distribution was evidenced for the lowest 1 km of the atmosphere, although probably important variations could be expected at higher levels, where the high O3 return strata are injected according to the modelling results and non-tethered balloon data. Relatively low concentrations of ultrafine particles (UFPs) were found during the study, and nucleation episodes were only detected in the boundary layer. Two types of O3 episodes were identified: type A with major exceedances of the O3 information threshold (180 µg m−3 on an hourly basis) caused by a clear daily concatenation of local/regional production with accumulation (at upper levels), fumigation and direct transport from the BMA (closed circulation); and type B with regional O3 production without major recirculation (or fumigation) of the polluted BMA/regional air masses (open circulation), and relatively lower O3 levels, but still exceeding the 8 h averaged health target. To implement potential O3 control and abatement strategies two major key tasks are proposed: (i) meteorological forecasting, from June to August, to predict recirculation episodes so that NOx and VOC abatement measures can be applied before these episodes start; (ii) sensitivity analysis with high-resolution modelling to evaluate the effectiveness of these potential abatement measures of precursors for O3 reduction