82 research outputs found
Experimentally-validated models for the off-design simulation of a medium-size solar organic Rankine cycle unit
Organic Rankine Cycle is an efficient and reliable technology for the thermal-to-electricity conversion of low-grade heat sources but the variability in boundary conditions often forces these systems to operate at off-design conditions. The development of reliable models for the performance prediction of organic Rankine cycle power systems under off-design conditions is therefore crucial for system-level integration and control implementation. In this paper, a mathematical model for the evaluation of the expected performance of organic Rankine cycle power units in a large range of operating conditions based on experimental data collected in a medium-size solar organic Rankine cycle power plant is presented. Two different empirical approaches for the performance prediction of heat exchangers and machines, namely, constant-efficiency and correlated-based approaches, are proposed and compared. In addition, empirical correlations based on experimental data are proposed for the preliminary assessment of the energy demanded during the start-up phase and the corresponding duration. Results demonstrate that a good achievement in terms of accuracy of the model and reliability of the simulation performance can be obtained by using a constant-efficiency approach, with average errors lower than 5% and 2.5 K for the expected net power and outlet oil temperature respectively. The use of polynomial correlations leads to a more accurate estimation of the performance parameters used for evaporator and the turbine (in particular the evaporator heat effectiveness and the isentropic and electromechanical efficiency for the turbine), which strongly affect the main output variables of the model and, at the same time, are remarkably influenced by the operating conditions. A reduction in the average error in the prediction of the net power and outlet temperature of the heat transfer fluid to about 4% and 1.5 K respectively is therefore achieved by this approach. Average errors of 18.5% and 12.5% are achieved for the start-up time and the corresponding energy absorbed, respectively. Although the results obtained in terms of accuracy could be improved, these correlations can give an initial indication about the duration and energy required during this phase
Critical Impact of Fin Thermal Conductivity in the Modeling of Evaporator Under Frost Conditions
peer reviewedRefrigeration systems such as heat pumps may be subject to frost formation. This phenomenon plays a major role in the heat pump overall performance drop due to the presence of an additional thermal resistance and an increase of the airside pressure drop. Deep experimental investigations show a typical pattern in frost distribution through the heat exchanger, in various operating conditions. A tube-by-tube simulation model is proposed. The dynamic model accounts for two-phase and overheated zones on the refrigerant side. On the air side, the frost may evolve independently on each tube and their corresponding fins, giving a non-uniform frost layer throughout the device. However, in a first time, important discrepancies are noticed between the distribution of frost predicted by the model and the obtained experimental data. The aforementioned model is then improved by taking the fin thermal conductivity into account. Unlike the first version of the model, the results from the new one match more closely with the experimental observations. This model is successfully validated by means of the empirical data. Such model can pave the way toward future designs of evaporator that requires accurate frost accretion prediction
Phase I trial combining temozolomide plus lapatinib for the treatment of brain metastases in patients with HER2-positive metastatic breast cancer: the LAPTEM trial
Background Brain metastases (BMs) pose a clinical challenge in breast cancer (BC). Lapatinib or temozolomide showed activity in BM. Our study assessed the combination of both drugs as treatment for patients with HER2-positive BC and BM. Methods Eighteen patients were enrolled, with sixteen of them having recurrent or progressive BM. Any type of previous therapy was allowed, and disease was assessed by gadolinium (Gd)-enhanced magnetic resonance imaging (MRI). The primary end points were the evaluation of the dose-limiting toxicities (DLTs) and the determination of the maximum-tolerated dose (MTD). The secondary end points included objective response rate, clinical benefit and duration of response. Results The lapatinib-temozolomide regimen showed a favorable toxicity profile because the MTD could not be reached. The most common adverse events (AEs) were fatigue, diarrhea and constipation. Disease stabilization was achieved in 10 out of 15 assessable patients. The estimated median survival time for the 16 patients with BM reached 10.94 months (95% CI: 1.09-20.79), whereas the median progression-free survival time was 2.60 months [95% confidence interval (CI): 1.82-3.37]. Conclusions The lapatinib-temozolomide combination is well tolerated. Preliminary evidence of clinical activity was observed in a heavily pretreated population, as indicated by the volumetric reductions occurring in brain lesion
Future perspectives on sustainable tribology
AbstractThis paper highlights the future perspectives of sustainable tribology by examining the economic, environmental and social impact of three tribological case studies. One case study examines the sustainability and durability of micro-CHP systems looking the tribological phenomena generated within a scroll expander system. The scroll is the main part of a specific micro-CHP system and experiences wear and cavitation damage. The tribological optimization of the scroll expander improves the sustainability of the micro-CHP unit while it has a serious economic and environmental impact to the consumers and to the society in general. Another case study is focused on friction and wear performance of lifeboat launch slipways. The causes of high friction and wear during the RNLI's lifeboat launches along an inclined slipway are investigated with a view to reducing the environmental impact due to slipway panel wear and lubricant release into the marine environment. The project encompasses the sustainable design of slipway panels using design modifications based on tribological investigations to double their lifespan, while environmental and economic impact was significantly reduced by the use of biodegradable greases and water as lubricants. The final case study involves an investigation of recycled plastic materials to replace polyurethane used on skateboard wheels, scooters and similar applications. Polyurethane (PU) is difficult to recycle. With the dwindling resources and environmental problems facing the world today, recycling for both waste reduction and resource preservation has become an increasingly important aspect of sustainability. The tribological results showed that recycled polycarbonate plastic can effectively act as a substitute to polyurethane wheels. Moreover, sustainability considerations showing the environmental benefits of the use of recycled plastics over PU include reducing the CO2 footprint by 50% and the energy consumed by 60%, among other benefits. These case studies emphasise the importance of sustainable tribology in our epoch showing that increased sustainability performance can be achieved through tribology to a significant extent in many cases, providing stability to our world and more viable long term growth to our societies
Resilient cooling strategies – A critical review and qualitative assessment
The global effects of climate change will increase the frequency and intensity of extreme events such as heatwaves and power outages, which have consequences for buildings and their cooling systems. Buildings and their cooling systems should be designed and operated to be resilient under such events to protect occupants from potentially dangerous indoor thermal conditions. This study performed a critical review on the state-of-the-art of cooling strategies, with special attention to their performance under heatwaves and power outages. We proposed a definition of resilient cooling and described four criteria for resilience—absorptive capacity, adaptive capacity, restorative capacity, and recovery speed —and used them to qualitatively evaluate the resilience of each strategy. The literature review and qualitative analyses show that to attain resilient cooling, the four resilience criteria should be considered in the design phase of a building or during the planning of retrofits. The building and relevant cooling system characteristics should be considered simultaneously to withstand extreme events. A combination of strategies with different resilience capacities, such as a passive envelope strategy coupled with a low-energy space-cooling solution, may be needed to obtain resilient cooling. Finally, a further direction for a quantitative assessment approach has been pointed out
Evaluating organ delineation, dose calculation and daily localization in an open-MRI simulation workflow for prostate cancer patients
BACKGROUND: This study describes initial testing and evaluation of a vertical-field open Magnetic Resonance Imaging (MRI) scanner for the purpose of simulation in radiation therapy for prostate cancer. We have evaluated the clinical workflow of using open MRI as a sole modality for simulation and planning. Relevant results related to MRI alignment (vs. CT) reference dataset with Cone-Beam CT (CBCT) for daily localization are presented. METHODS: Ten patients participated in an IRB approved study utilizing MRI along with CT simulation with the intent of evaluating the MRI-simulation process. Differences in prostate gland volume, seminal vesicles, and penile bulb were assessed with MRI and compared to CT. To evaluate dose calculation accuracy, bulk-density-assignments were mapped onto respective MRI datasets and treated IMRT plans were re-calculated. For image localization purposes, 400 CBCTs were re-evaluated with MRI as the reference dataset and daily shifts compared against CBCT-to-CT registration. Planning margins based on MRI/CBCT shifts were computed using the van Herk formalism. RESULTS: Significant organ contour differences were noted between MRI and CT. Prostate volumes were on average 39.7% (p = 0.002) larger on CT than MRI. No significant difference was found in seminal vesicle volumes (p = 0.454). Penile bulb volumes were 61.1% higher on CT, without statistical significance (p = 0.074). MRI-based dose calculations with assigned bulk densities produced agreement within 1% with heterogeneity corrected CT calculations. The differences in shift positions for the cohort between CBCT-to-CT registration and CBCT-to-MRI registration are −0.15 ± 0.25 cm (anterior-posterior), 0.05 ± 0.19 cm (superior-inferior), and −0.01 ± 0.14 cm (left-right). CONCLUSIONS: This study confirms the potential of using an open-field MRI scanner as primary imaging modality for prostate cancer treatment planning simulation, dose calculations and daily image localization
Technical and economic optimization of subcritical, wet expansion and transcritical Organic Rankine Cycle (ORC) systems coupled with a biogas power plant
Generally, >40% of the useful energy (cooling engine and exhaust gases) are wasted by a biogas power plant through the cooling radiator and the exhaust gases. An efficient way to convert this waste heat into work and eventually electricity is the use of an organic Rankine cycle (ORC) power system. Over the last few years, different architectures have been widely investigated (subcritical, wet expansion and trans-critical). Despite the promising performances, realistic economic and technical constraints, also related to the application, are required for a meaningful comparison between ORC technologies and architectures. Starting from the limited literature available, the aim of the present paper is to provide a methodology to compare sub-critical, trans-critical and wet expansion cycles and different types of expanders (both volumetric and turbomachinery) from both technical and economic point of view, which represent one of the main novel aspects of the present work. In particular, the paper focuses on the thermo-economic optimization of an ORC waste heat recovery unit for a 500 kWe biogas power plant located in a detailed regional market, which was not investigated yet. By means of a genetic algorithm, the adopted methodology optimizes a given economic criteria (Pay-Back Period, Net Present Value, Profitability Index and Internal Rate of Return) while respecting technical constraints (expander limitations) and thermodynamic constraints (positive pinch points in heat exchangers, etc.). The results show that optimal ORC solutions with a potential of energy savings up to 600 MWh a year and with a pay-back period lower than 3 years are achievable in the regional market analysed. © 2017 Elsevier Lt
Nuclear magnetic resonance: a diagnostic aid in oncology
SCOPUS: ar.jinfo:eu-repo/semantics/publishe
- …