44 research outputs found
The Low Energy Amplitude to One and Two Loops
The low-energy amplitude is computed explicitly to two-loop accuracy
in the chiral expansion. It depends only on six independent (combinations of)
low-energy constants which are not fixed by chiral symmetry. Four of these
constants are determined {\it via} sum rules which are evaluated using
scattering data at higher energies. Dependence of the low-energy phase shifts
and of the threshold parameters on the remaining two constants (called
and ) are discussed and compared to the existing data from
experiments. Using generalised PT, the constants and are
related to fundamental QCD parameters such as the quark condensate and the quark mass ratio . It is shown
that forthcoming accurate low-energy data can be used to provide, for
the first time, experimental evidence in favour of or against the existence of
a large quark-antiquark condensate in the QCD vacuum.Comment: 61 pages, LaTeX, 10 figures in separate tarred, compressed and
uuencoded Postscript fil
Discovery of Tantalum, Rhenium, Osmium, and Iridium Isotopes
Currently, thirty-eight tantalum, thirty-eight rhenium, thirty-nine osmium,
and thirty-eight iridium, isotopes have been observed and the discovery of
these isotopes is discussed here. For each isotope a brief synopsis of the
first refereed publication, including the production and identification method,
is presented.Comment: To be published in At. Data Nucl. Data Table
How Long and Low Can You Go? Effect of Conformation on the Risk of Thoracolumbar Intervertebral Disc Extrusion in Domestic Dogs
Intervertebral disc extrusion (IVDE) is a common neurological disorder in certain dog breeds, resulting in spinal cord compression and injury that can cause pain and neurological deficits. Most disc extrusions are reported in chondrodystrophic breeds (e.g. Dachshunds, Basset Hounds, Pekingese), where selection for ‘long and low’ morphologies is linked with intervertebral discs abnormalities that predispose dogs to IVDE. The aim of this study was to quantify the relationship between relative thoracolumbar vertebral column length and IVDE risk in diverse breeds. A 14 month cross-sectional study of dogs entering a UK small animal referral hospital for diverse disorders including IVDE was carried out. Dogs were measured on breed-defining morphometrics, including back length (BL) and height at the withers (HW). Of 700 dogs recruited from this referral population, measured and clinically examined, 79 were diagnosed with thoracolumbar IVDE following diagnostic imaging ± surgery. The BL:HW ratio was positively associated with IVDE risk, indicating that relatively longer dogs were at increased risk, e.g. the probability of IVDE was 0.30 for Miniature Dachshunds when BL:HW ratio equalled 1.1, compared to 0.68 when BL:HW ratio equalled 1.5. Additionally, both being overweight and skeletally smaller significantly increased IVDE risk. Therefore, selection for longer backs and miniaturisation should be discouraged in high-risk breeds to reduce IVDE risk. In higher risk individuals, maintaining a lean body shape is particularly important to reduce the risk of IVDE. Results are reported as probabilities to aid decision-making regarding breed standards and screening programmes reflecting the degree of risk acceptable to stakeholders
Oat–buckwheat breads – technological quality, staling and sensory properties
peer reviewedThe technological and sensory properties and the staling of breads made from oat flour (OF) and buckwheat flour
(BF) were analysed. Significant differences in protein and ash content were found in the experimental breads
due to significant differences in the composition of the BF and OF used. As the proportion of BF in the recipe
increased, a deterioration in the technological properties of the dough and bread as well as an increase in the
crumb hardness were observed. The presence of OF in the recipe increased the bread volume, significantly
enhanced the lightness of the crust and crumb and improved the overall sensory quality. The OF used in the
recipe decreased the starch retrogradation enthalpy value, which is strongly related to a delay in bread staling.
The proposed bakery products can be attractive to consumers who are looking for new food products
WAP service of National Institute of Telecommunications
Podano ogólne informacje na temat nowo utworzonego serweru WAP Instytutu Łączności, jego możliwości oraz dostępnych tam materiałów.The general informations about the new WAP server, his possibilities and accessible materials were presented
INSTEPRO: Integrated Production Control System
Artykuł przedstawia koncepcję Zintegrowanego Systemu Sterowania Produkcją, bedącego częścią informatycznej infrastruktury przedsiębiorstwa, przetwarzającego dane z produkcji i wspierającego zarządzanie zarówno na poziomie przedsiębiorstwa, jak i procesu produkcyjnego. System taki stużyłby do monitorowania, kontroli, nadzoru i sterowania procesami wytwórczymi w środowiskach produkcyjnych przedsiębiorstw posiadających zarówno Systemy Planowania Zasobów (ERP), jak i Systemy Akwizycji Danych (SCADA). W artykule zaproponowana została architektura systemu z wykorzystaniem zaawansowanych narzędzi implementujących najnowsze algorytmy teorii sterowania i informatyki.The paper presents an idea of the Integrated Production Control System as a part of IT infrastructure of a production company. The system provides support for production data processing and management, both at a company, and production level. Proposed system is useful for monitoring, supervision and control of industrial production in companies having Enterprise Resource Planning (ERP) and Supervisory Control and Data Acquisition (SCADA) systems. The architecture of such production control system with the use of advanced tools offered by control theory and informatics is described
INSTEPRO: Integrated Production Control System
Artykuł przedstawia koncepcję Zintegrowanego Systemu Sterowania Produkcją, będącego częścią informatycznej infrastruktury przedsiębiorstwa, przetwarzającego dane z produkcji i wspierającego zarządzanie zarówno na poziomie przedsiębiorstwa, jak i procesu produkcyjnego. System taki służyłby do monitorowania, kontroli, nadzoru i sterowania procesami wytwórczymi w środowiskach produkcyjnych przedsiębiorstw posiadających zarówno Systemy Planowania Zasobów (ERP), jak i Systemy Akwizycji Danych (SCADA). W artykule zaproponowana została architektura systemu z wykorzystaniem zaawansowanych narzędzi implementujących najnowsze algorytmy teorii sterowania i informatyki.The paper presents an idea of the Integrated Production Control System as a part of IT infrastructure of a production company. The system provides support for production data processing and management, both at a company, and production level. Proposed system is useful for monitoring, supervision and control of industrial production in companies having Enterprise Resource Planning (ERP) and Supervisory Control and Data Acquisition (SCADA) systems. The architecture of such production control system with the use of advanced tools offered by control theory and informatics is described
"Bridging of spine” – titanium alloy and polymer PEEK for intervertebral stabilization of spine
W implantologii kręgosłupowej stosowane są dwa typy implantów: „non-fusion” oraz „fusion”, czyli odpowiednio bez zrostu i ze zrostem kostnym. Większą grupę stanowią stabilizacje ze zrostem kostnym, dla których szybkość oraz jakość osteointegracji ma kluczowe znaczenie dla końcowego efektu leczenia. Najczęściej stosowanymi biomateriałami są stopy tytanu oraz polimer PEEK (polieteroeteroketon) o różnej topografii powierzchni 2D oraz przestrzennej konstrukcji 3D wynikających z zastosowanej obróbki wykańczającej, warstw powierzchniowych, metod wytwarzania. Wykazano, że osteointegracja zależy w dużym stopniu od m.in. odpowiedniej konfiguracji 2D i 3D, topografii, porowatości oraz energii powierzchniowej. W pracy przeanalizowano wpływ rodzaju biomateriału: stop Ti6Al4V ELI, PEEK Optima oraz technologii wytwarzania implantów: ubytkowa (PEEK, Ti), przyrostowa EBT - Electron Beam Technology (Ti-3D-Truss) na osteointegrację. Z zachowaniem analogicznych warunków procesu, jak przy produkcji implantów, przygotowano modele/próbki, które poddano badaniom biologicznym in vitro oraz in vivo na zwierzętach. Pobrane preparaty zwierzęce z modelami implantów oceniano pod kątem osteointegracji z użyciem przemysłowej tomografii rentgenowskiej CTt. Wyniki potwierdziły biokompatybilność badanych biomateriałów, a tym samym bezpieczeństwo stosowania w chirurgii kostnej. Implantowe stopy Ti6Al4V ELI w porównaniu z polimerem PEEK są korzystniejszymi biomateriałami na stabilizację międzytrzonową typu „fusion”. Polimer PEEK Optima jest dobrym materiałem w stabilizacjach typu „non-fusion”. Wykorzystanie technologii przyrostowej EBT do wytwarzania implantów z proszków Ti6Al4V ELI pozwala na uzyskanie „wulkanicznych” powierzchni oraz przestrzennych/ kratownicowych konstrukcji Ti-3D-Truss o dużym rozwinięciu powierzchniowym, które sprzyjają i przyspieszają przerost/obrost tkanki kostnej przez implant. Dotychczasowe doniesienia kliniczne wskazują na poprawę efektywności chirurgicznego leczenia, polegającego na przyspieszonym zroście kostnym w „mostowaniu” kręgosłupa z wykorzystaniem implantów
międzytrzonowych typu Ti-3D-Truss.In spinal implantology there are two types of implants: “non-fusion” and “fusion”, that is without and with bone overgrowth, respectively. A larger group consists of stabilization with bone overgrowth, for which speed and quality of osseointegration is crucial for final treatment outcome. The most commonly used biomaterials are titanium alloys and polietero-eteroketon (PEEK) of different 2D surface topography and 3D spatial structure resulting from the finishing, surface layers or production methods. It has been shown that osseointegration depends largely on suitable configuration of 2D and 3D, topography, porosity and surface energy. The impact of biomaterial type: Ti6Al4V titanium alloy ELI, PEEK OPTIMA and implant production technology: deficient (PEEK, Ti), incremental EBT-Electron Beam Technology (Ti-3D-Truss) on the osseointegration were analyzed. In compliance with corresponding process conditions of implant production, models/samples were prepared and subjected to in vitro biological tests and in vivo animal tests. Collected animal specimens with implants models were tested for osseointegration with the use of CTt tomography. The results confirmed the biocompatibility of tested biomaterials, and thus safety in the bone surgery. Ti6Al4V ELI alloys compared with PEEK polymer are favourable biomaterials for “fusion” interbody stabilization. The polymer PEEK Optima is preferred material for “non-fusion” stabilizations. The use of EBT technology for implant production made of Ti6Al4V ELI powder allows to obtain “volcanic” surfaces and spatial/lattice Ti-3D-Truss structures with a large surface area which accelerate the bone over-/in-growth through the implant. Previous reports indicate improved clinical effectiveness of surgical treatment involving the accelerated bone overgrowth in the “bridging” of spine with the use of Ti-3D-Truss interbody implants