An operational and economic study of a reverse osmosis desalination system for potable water and land irrigation

AbstractDesalination is a method for producing water for human consumption, irrigation or industrial utilisation. In this study, a reverse osmosis (RO) system for brackish water desalination was theoretically investigated to produce both potable drinking and agricultural water with a lower overall and specific energy consumption. As a case study, the Main Outfall Drain in Iraq is used as the brackish water source. A numerical model based on solution-diffusion theory was developed in Matlab Simulink and used to analyse the design and performance of an RO system. The effect of feed water temperature, pressure, salinity and recovery ratio on the efficiency of the whole RO system was investigated for a wide range of design considerations. The design of an RO system for this application was optimised and economic assessment carried out. Results show that with boosting recovery ratio from 30% to 60%, the specific energy of desalinated water production below 400ppm was reduced from 2.8kWh/m3 to a more economically favourable value of 0.8kWh/m3, when utilizing a pressure exchanger as a recovery device. Salt rejection was reduced from 97% to 88% to obtain large quantities of water for irrigation with an acceptable salinity (<1600ppm), for agricultural use. The reduction in salt rejection is influenced by the feed water temperature and pressure; also the average pore diameter of the RO membrane and in turn determines the reduction in system energy consumption. It was found that the total cost to produce 24,000m3/d of water from a feed salinity of 15,000ppm and a water quality of <400ppm would be 0.11£/m3 with a corresponding investment cost of £14.4million for the drinking water, and for irrigation) obtained product <1600ppm) are £0.9/m3 and £11.3million

Exergy Analysis of Reverse Osmosis for Potable Water and Land Irrigation

A thermodynamic study is performed on the Reverse Osmosis (RO) desalination process for brackish water. The detailed RO model of thermodynamics properties with and without an energy recovery device was built in Simulink/MATLAB and validated against reported measurement data. The efficiency of desalination plants can be estimated by both the first and second laws of thermodynamics. While the first law focuses on the quantity of energy, the second law analysis (i.e. exergy analysis) introduces quality. This paper used the Main Outfall Drain in Iraq as a case study to conduct energy and exergy analysis of RO process. The result shows that it is feasible to use energy recovery method for reverse osmosis with salinity less than 15000 ppm as the exergy efficiency increases twice. Moreover, this analysis shows that the highest exergy destruction occurs in the rejected water and lowest occurs in the permeate flow rate accounting 37% for 4.3% respectively