The influence of chemical composition on structure of plate X100 after physical simulations of finishing rolling process with accelerated cooling

The research presented in the current paper was carried out for the experimental steel designed for plate which meets the requirements for grade X100 according to API5L. The tested steel is fine-grained constructional steel for making tubes for gas pipelines with minimal yield point of 690 MPa and tensile strength over 760 MPa. The laboratory tests were obtained that in the structure the polygonal ferrite were observed. That may have a disadvantageous influence on the limit of plasticity value X100 steel. The corrections of the chemical composition were carried out. The temperature and deformation schemes in the thermo-plastic treatment phase were determined

The influence of drawing speed on structure changes in high carbon steel wires

In the paper the influence of the drawing speed on structure changes has been assessed. The Scanning Electron Microscope investigation confirmed that for wires drawn with high total draft, exceeding 80 %, makes it impossible to clearly assess the impact of drawing technology on structural changes in the drawn wires. Thus, to assess the structural changes necessary to apply quantitative methods. On the basis of examination of the wire structure by measuring of electrical resistance, the structure changes in drawn wires has been determined. It has been shown that the increase of drawing speed, especially above 15 m/s, causes an increase in structure defect, with a decline in platelet orientation of cementite in drawn wires

Managing housing needs in post conflict housing reconstruction in Sri Lanka: gaps versus recommendations

Addressing housing needs in post conflict housing reconstruction leads to successful housing reconstruction. As part of a study of investigating how the housing needs can be effectively addressed in post conflict housing reconstruction, this paper identifies the gaps in managing housing needs in post conflict housing reconstruction within the context of Sri Lanka and presents the recommendations to minimise such gaps. Data was collected through un-structured interviews conducted with 37 participants, comprising policy makers, practitioners, academics and beneficiaries who engaged in post conflict housing reconstruction in Sri Lanka. Gaps were mainly found in conflict sensitivity, measures related to physical housing, performance of implementing agencies, policy and practice issues. On the job training, application of ‘do no harm’ principles, enhanced beneficiary participation, enhanced accountability, effective monitoring, enhanced knowledge sharing, adequate drinking water facilities, irrigation development and initiatives for material manufacturing were suggested as recommendations to minimise these gaps. Identification of gaps in managing housing needs in post conflict housing reconstruction and recommendations to minimise them inform policy makers to address the housing needs effectively through incorporating these aspects into the related policies. This in turn enhances the sustainability in housing development after conflicts

Have Anglo-Saxon concepts really influenced the development of European qualifications policy?

This paper considers how far Anglo-Saxon conceptions of have influenced European Union vocational education and training policy, especially given the disparate approaches to VET across Europe. Two dominant approaches can be identified: the dual system (exemplified by Germany); and output based models (exemplified by the NVQ ‘English style’). Within the EU itself, the design philosophy of the English output-based model proved in the first instance influential in attempts to develop tools to establish equivalence between vocational qualifications across Europe, resulting in the learning outcomes approach of the European Qualifications Framework, the credit-based model of European VET Credit System and the task-based construction of occupation profiles exemplified by European Skills, Competences and Occupations. The governance model for the English system is, however, predicated on employer demand for ‘skills’ and this does not fit well with the social partnership model encompassing knowledge, skills and competences that is dominant in northern Europe. These contrasting approaches have led to continual modifications to the tools, as these sought to harmonise and reconcile national VET requirements with the original design. A tension is evident in particular between national and regional approaches to vocational education and training, on the one hand, and the policy tools adopted to align European vocational education and training better with the demands of the labour market, including at sectoral level, on the other. This paper explores these tensions and considers the prospects for the successful operation of these tools, paying particular attention to the European Qualifications Framework, European VET Credit System and European Skills, Competences and Occupations tool and the relationships between them and drawing on studies of the construction and furniture industries

Rhesus macaque MHC class I molecules show differential subcellular localizations

The MHC class I gene family of rhesus macaques is characterised by considerable gene duplications. While a HLA-C-orthologous gene is absent, the Mamu-A and in particular the Mamu-B genes have expanded, giving rise to plastic haplotypes with differential gene content. Although some of the rhesus macaque MHC class I genes are known to be associated with susceptibility/resistance to infectious diseases, the functional significance of duplicated Mamu-A and Mamu-B genes and the expression pattern of their encoded proteins are largely unknown. Here, we present data of the subcellular localization of AcGFP-tagged Mamu-A and Mamu-B molecules. We found strong cell surface and low intracellular expression for Mamu-A1, Mamu-A2 and Mamu-A3-encoded molecules as well as for Mamu-B*01704, Mamu-B*02101, Mamu-B*04801, Mamu-B*06002 and Mamu-B*13401. In contrast, weak cell surface and strong intracellular expression was seen for Mamu-A4*1403, Mamu-B*01202, Mamu-B*02804, Mamu-B*03002, Mamu-B*05704, Mamu-I*010201 and Mamu-I*0121. The different expression patterns were assigned to the antigen-binding α1 and α2 domains, suggesting failure of peptide binding is responsible for retaining ‘intracellular’ Mamu class I molecules in the endoplasmic reticulum. These findings indicate a diverse functional role of the duplicated rhesus macaque MHC class I genes

Future challenges in colloid and interfacial science

This article deals with topics where I expect special future challenges, exemplifying these by experiments out of my own department. One area where I expect large progress also in view of many technical developments in the past concerns the understanding of the structure of fluid interfaces at the atomic level. It is shown by non-linear optical spectroscopies that the free water surface is ice-like and can be “liquefied” by ion adsorption. X-ray fluorescence from the interface demonstrates that ion binding is very specific which cannot be explained by existing theories. A second major area are nonequilibrium features, and one of the old and new ones here is nucleation and growth. This presentation concentrates on effects produced by ultrasound, a well-defined trigger of gas bubble formation. It exhibits high potential for chemistry at extreme conditions but with a reactor at normal conditions. It has special importance for treatment of surfaces that can be also manipulated via controlled surface energies. A third area will concern complex and smart systems with multiple functions in materials and biosciences. As next generation, I anticipate those with feedback control, and examples on this are self-repairing coatings

Alien Invasive Slider Turtle in Unpredicted Habitat: A Matter of Niche Shift or of Predictors Studied?

BACKGROUND: Species Distribution Models (SDMs) aim on the characterization of a species' ecological niche and project it into geographic space. The result is a map of the species' potential distribution, which is, for instance, helpful to predict the capability of alien invasive species. With regard to alien invasive species, recently several authors observed a mismatch between potential distributions of native and invasive ranges derived from SDMs and, as an explanation, ecological niche shift during biological invasion has been suggested. We studied the physiologically well known Slider turtle from North America which today is widely distributed over the globe and address the issue of ecological niche shift versus choice of ecological predictors used for model building, i.e., by deriving SDMs using multiple sets of climatic predictor. PRINCIPAL FINDINGS: In one SDM, predictors were used aiming to mirror the physiological limits of the Slider turtle. It was compared to numerous other models based on various sets of ecological predictors or predictors aiming at comprehensiveness. The SDM focusing on the study species' physiological limits depicts the target species' worldwide potential distribution better than any of the other approaches. CONCLUSION: These results suggest that a natural history-driven understanding is crucial in developing statistical models of ecological niches (as SDMs) while "comprehensive" or "standard" sets of ecological predictors may be of limited use

Allele-Independent Turnover of Human Leukocyte Antigen (HLA) Class Ia Molecules.

Major histocompatibility complex class I (MHCI) glycoproteins present cytosolic peptides to CD8+ T cells and regulate NK cell activity. Their heavy chains (HC) are expressed from up to three MHC gene loci (human leukocyte antigen [HLA]-A, -B, and -C in humans), whose extensive polymorphism maps predominantly to the antigen-binding groove, diversifying the bound peptide repertoire. Codominant expression of MHCI alleles is thus functionally critical, but how it is regulated is not fully understood. Here, we have examined the effect of polymorphism on the turnover rates of MHCI molecules in cell lines with functional MHCI peptide loading pathways and in monocyte-derived dendritic cells (MoDCs). Proteins were labeled biosynthetically with heavy water (2H2O), folded MHCI molecules immunoprecipitated, and tryptic digests analysed by mass spectrometry. MHCI-derived peptides were assigned to specific alleles and isotypes, and turnover rates quantified by 2H incorporation, after correcting for cell growth. MHCI turnover half-lives ranged from undetectable to a few hours, depending on cell type, activation state, donor, and MHCI isotype. However, in all settings, the turnover half-lives of alleles of the same isotype were similar. Thus, MHCI protein turnover rates appear to be allele-independent in normal human cells. We propose that this is an important feature enabling the normal function and codominant expression of MHCI alleles

Progress Towards High Performance, Steady-state Spherical Torus

Research on the Spherical Torus (or Spherical Tokamak) is being pursued to explore the scientific benefits of modifying the field line structure from that in more moderate aspect-ratio devices, such as the conventional tokamak. The Spherical Tours (ST) experiments are being conducted in various U.S. research facilities including the MA-class National Spherical Torus Experiment (NSTX) at Princeton, and three medium-size ST research facilities: Pegasus at University of Wisconsin, HIT-II at University of Washington, and CDX-U at Princeton. In the context of the fusion energy development path being formulated in the U.S., an ST-based Component Test Facility (CTF) and, ultimately a Demo device, are being discussed. For these, it is essential to develop high-performance, steady-state operational scenarios. The relevant scientific issues are energy confinement, MHD stability at high beta (B), noninductive sustainment, ohmic-solenoid-free start-up, and power and particle handling. In the confinement area, the NSTX experiments have shown that the confinement can be up to 50% better than the ITER-98-pby2 H-mode scaling, consistent with the requirements for an ST-based CTF and Demo. In NSTX, CTF-relevant average toroidal beta values bT of up to 35% with the near unity central betaT have been obtained. NSTX will be exploring advanced regimes where bT up to 40% can be sustained through active stabilization of resistive wall modes. To date, the most successful technique for noninductive sustainment in NSTX is the high beta-poloidal regime, where discharges with a high noninductive fraction ({approx}60% bootstrap current + neutral-beam-injected current drive) were sustained over the resistive skin time. Research on radio-frequency-based heating and current drive utilizing HHFW (High Harmonic Fast Wave) and EBW (Electron Bernstein Wave) is also pursued on NSTX, Pegasus, and CDX-U. For noninductive start-up, the Coaxial Helicity Injection (CHI), developed in HIT/HIT-II, has been adopted on NSTX to test the method up to Ip {approx} 500 kA. In parallel, start-up using radio-frequency current drive and only external poloidal field coils are being developed on NSTX. The area of power and particle handling is expected to be challenging because of the higher power density expected in the ST relative to that in conventional aspect-ratio tokamaks. Due to its promise for power and particle handling, liquid lithium is being studied in CDX-U as a potential plasma-facing surface for a fusion reactor